• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.926-928
• /
• 2011

Material used in aerospace field is exposed in high temperature environments, and the required important factors of material is high strength and low weight. These conditions are satisfying material, as in the titanium alloy has been used mainly. In this paper, Cone shaped brackets that attach to the case, in order to avoid the difficulty of welding position, sheet attached to the brackets welded on, then the way Cone is proposed. Existing methods and proposed method of analysis under the same conditions through thermal stress and structural analysis adequacy of the proposed bracket types were analyzed. The program was used to analysis the ABAQUS/CAE.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.461-472
• /
• 1994

The purpose of this study was to evaluate the sealing ability according to types of spreader and compatibility of accessory cone used in lateral condensation method. 120 plastic blocks with canal preformed were instrumented with K-,H-files and Gates-Gllidden bur. Shaped plastic blocks were divided into six experimental groups according to spreader and accessory cone used in lateral condensation. Then they were obturated by lateral condensation method without -sealer. Six experimental groups were as follows: Group 1 : Filling with #30 spreader & #25 gutta-percha cone Group 2 : Filling with #30 spreader & Fine accessory cone Group 3 : Filling with #3 spreader & #25 gutta-percha cone Group 4 : Filling with #3 spreader & Fine accessory cone Group 5 : Filling with #20,#30 spreader & #25 gutta-percha cone Group 6 : Filling with #2, #3 spreader & Fine accessory cone All the blocks were stored in 100% humidor at room temperature for 2 days. Each block was placed in centrifuged for 20 minutes at 3,000 rpm. Apical leakage was mesured from the apical foramen to the most coronal level of- dye leakage in millimeter under a stereoscope. The data were analysed by ANOVA. The obtained results were as follows; 1. In groups using two spreaders(Group 5,6), the linear leakage was less than one spreader using groups(Group 1-4). 2. Tn groups using two spreaders(Group 5,6), there was no significant difference in linear leakage between standardized -spreader group and non standardized group (p>0.01). 3. When one spreader was used(Group 1-4), standardized-spreader groups showed less linear leakage than nonstandardized spreader groups(P<0.01). 4. In case of using same spreader(Groupl,2 & Group 3,4), there was no significant difference in linear leakage according to accessory cone type. 5. It needs to use one more spreaders to increase apical sealability.

• Imaging Science in Dentistry
• /
• v.45 no.2
• /
• pp.95-101
• /
• 2015

Purpose: This study used cone-beam computed tomography (CBCT) to characterize mandibular molar root and canal morphology and its variability in Belgian and Chilean population samples. Materials and Methods: We analyzed the CBCT images of 515 mandibular molars (257 from Belgium and 258 from Chile). Molars meeting the inclusion criteria were analyzed to determine (1) the number of roots; (2) the root canal configuration; (3) the presence of a curved canal in the cross-sectional image of the distal root in the mandibular first molar and (4) the presence of a C-shaped canal in the second mandibular molar. A descriptive analysis was performed. The association between national origin and the presence of a curved or C-shaped canal was evaluated using the chi-squared test. Results: The most common configurations in the mesial root of both molars were type V and type III. In the distal root, type I canal configuration was the most common. Curvature in the cross-sectional image was found in 25% of the distal canals of the mandibular first molars in the Belgian population, compared to 11% in the Chilean population. The prevalence of C-shaped canals was 10% or less in both populations. Conclusion: In cases of unclear or complex root and canal morphology in the mandibular molars, CBCT imaging might assist endodontic specialists in making an accurate diagnosis and in treatment planning.

• Journal of architectural history
• /
• v.14 no.1 s.41
• /
• pp.135-150
• /
• 2005

Historical study of Korean traditional houses have been carried, mainly, based on the geographical region of Korean peninsula. However, the case of primitive houses can not be researched according to the geographical and racial concept of modern nations. This study aims to examine the primitive houses of ethnic minorities of northeastern China, where the cultural and racial background have been deeply rooted in the history of Korea as well as Korean traditional houses. Through the field research and literary materials, the basic types of primitive houses of the five ethnic minorities could be identified. Among these types, those that have possible relationship with Korean houses, are cone shaped house, underground house, and elevated wooden house. Archeological evidences of underground houses were amply found in Korea already, but above ground evidences could not be found. However, It seems quite certain that the cone shaped houses and elevated wooden houses, too, existed in Korea as one of the earliest housing types, as can be examined in remaining examples in Korean peninsula. With no doubt, the primitive houses of Korea have strong connection with that of the ethnic minorities of northeastern China. This can be verified through the facts that the evidences of cone shaped houses, the similarities of the use of Inner space, the evidences of elevated wooden houses. Also, the combination of wooden floor and ondol, which is known to be one of the strongest characteristic of Korean traditional houses, could be originated from the combination of primitive summer house, the elevated wooden house, and the winter house, the underground house with ondol.

• Restorative Dentistry and Endodontics
• /
• v.41 no.1
• /
• pp.68-73
• /
• 2016

This case report describes a unique C-shaped mandibular second premolar with four canals and three apical foramina and its endodontic management with the aid of cone-beam computer tomography (CBCT). C-shaped root canal morphology with four canals was identified under a dental operating microscope. A CBCT scan was taken to evaluate the aberrant root canal anatomy and devise a better instrumentation strategy based on the anatomy. All canals were instrumented to have a 0.05 taper using 1.0 mm step-back filing with appropriate apical sizes determined from the CBCT scan images and filled using a warm vertical compaction technique. A C-shaped mandibular second premolar with multiple canals is an anatomically rare case for clinicians, yet its endodontic treatment may require a careful instrumentation strategy due to the difficulty in disinfecting the canals in the thin root area without compromising the root structure.

• The Journal of the Korean dental association
• /
• v.54 no.2
• /
• pp.142-148
• /
• 2016

본 연구의 목적은 특이한 C형 치근과 근관을 가지고 있는 상악 제 1대구치의 근관치료 증례를 콘빔단층촬영을 사용하여 진단 및 치료하였음을 보고하는 것이다. 본 증례에서는 특이적인 해부학적 근관 형태가 콘빔단층촬영을 사용하여 확인되었으며 비외과적 근관치료가 시행되었다. 촬영한 영상에서 모든 치근이 C 형태로 융합되어 있으며 독립적인 4개의 근관을 포함하고 있음이 관찰되었다. C형 근관계의 복잡성을 고려할 때 콘빔단층촬영이 적절한 근관계의 확인과 의원성 손상을 예방하기 위해 유용한 보조적 방법인 것으로 보여진다.

• Mass Spectrometry Letters
• /
• v.7 no.1
• /
• pp.21-25
• /
• 2016

Dual-channel nano-electrospray has recently become an ionization technique of great promise especially in biological mass spectrometry. This unique approach takes advantage of the mixing processes that occurs during electrospray. Understanding in more detail the fundamental principles influencing spray formation further study of the origins of the mixing processes: (1) in a Taylor cone region, (2) in charged droplets or (3) in both environments. The dual-channel emitters were made from borosilicate theta-shape glass tubes (O.D. 1.2 mm) and had a tip diameters of less than 4 μm. Electrical contact was achived by deposition of a thin film of an appropriate metal onto the surface of the emitter. The experimental investigation of the Taylor cone formation in a dual-channel electrospray emitter has been carried out by injection of polystyrene beads (diameter 3 μm) at very low concentrations into one of the channels of the non-tapered theta-glass tubes. High-speed camera experiments were set up to visualize the mixing processes in Taylor cone regions for dual-channel emitters. Mass spectra from dual nano-electrospray are presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.40-49
• /
• 2003

Ferrule is widely used as fiber optic connecters. In fiber-optic communications. the shape accuracy such as coaxiality and cylindricity of ferrule affects insertion loss. When coaxial grinding of ferrule supported by two pin. pin alignment and chucking accuracy are very important. In this research, the kinematic behavior of the ferrule centers are investigated in the case where the ferrule is chucked with the cone-shaped center pins and bail centers, With homogeneous coordinate transformation and numerical analysis, the obtained results are as follows: In the case of cone-type center, the alignment errors between center pins alone do not affect the rotation accuracy of ferrule. The alignment errors between center holes cause sinusoidal displacement of ferrule. And the maximum displacement of ferrule centers is proportional to the center pin angle. In the case of ball-type center, the displacements of ferrule centers has similar pattern as cone-type center, and the alignment errors art proportional to ball diameters.

• Nuclear Engineering and Technology
• /
• v.5 no.3
• /
• pp.191-201
• /
• 1973

For fast neutron spectroscopy in MeV region, a recoil proton telescope detector was designed and constructed so as to increase in detection efficiency without appreciable deterioration in energy resolution by adopting a special type of recoil proton radiator which is a combination of a ring-shaped vertical radiator and a cone-shaped horizontal radiator at a certain geometry. A neutron stopper was built in the detector system to minimize the background due to direct exposure of the Si(Li) detectors to primary incident neutrons. The detection efficiency and the energy resolution calculated at various neutron energies and geometries are given and these characteristics of the detector system were tested by 14.1 MeV neutrons. As the calculation predicted, the relative detection efficiency in case of the combined radiator system is almost 2.2 times of that for a single, ring-shaped vertical radiator system. The calculated energy resolution is 3.7% FWHM, whereas the measured resolution was 3.9% which means resolution broadening of approximately. 30% was resulted by introducing a combined radiator system into the telescope. Increase in background less than 40% was also observed.

• Applied Microscopy
• /
• v.25 no.4
• /
• pp.9-16
• /
• 1995

Ultrastructure of stemmata(larval eye) of 5th-instar larval in cabbage butterfly, Pieris rapae L, was morphologically investigated with light microscope, scanning electron microscope and transmission electron microscope Six stemmata are on each side of the head. Stemmata V and VI have a Y-shaped sulcus on the surface of their corneal lenses, the others have a columnar shaped process and smooth globular surface. The visual type of stemmata is resembled a single ommatidium of compound eye. The dioptric apparatus are a biconvex shaped cornea and crystalline cone. As a photoreceptor, each stemmata consists of 7 retinular cells arranged into 2 tiers. The first ceil tier of 3 distal retinular cells has formed a V-shaped cup rhabdome and the second cell tier of 4 basal retinular cells has formed a H-shaped fused rhabdome. Each retinular cell filled with pigment granules and contained multivesiclular bodies, coated vesicle and common organelles. The peripheral parts of retinular cells are enveloped by neuroglia cells and retinular cells are surrounded by 3 corneagenous cells. The distal portions of the 3 corneagenous cells contact each other, but the Y-shaped stemmata is separated from each other immediately under the cornea. The 7 axons from each stemma congregate into a bundle and each 7-axon group joins to form a stemmatal nerve, consisting of 42 retinular axons.