In existing models in optimization, the crisp data improve has been used in the objective or constraints to derive the optimal solution, Besides, the subjective environments are eliminated because the complex and uncertain circumstances were regarded as Probable ambiguity, In other words those optimal solutions in the existing models could be the complete satisfactory solutions to the objective functions in the Process of application for industrial engineering methods to minimize risks of decision-making. As a result of those, decision-makers in location Problems couldn't face appropriately with the variation of demand as well as other variables and couldn't Provide the chance of wide selection because of the insufficient information. So under the circumstance. it has been to develop the model for the location and size decision problems of logistics facility in the use of the fuzzy theory in the intention of making the most reasonable decision in the Point of subjective view under ambiguous circumstances, in the foundation of the existing decision-making problems which must satisfy the constraints to optimize the objective function in strictly given conditions in this study. Introducing the Process used in this study after the establishment of a general mixed integer Programming(MIP) model based upon the result of existing studies to decide the location and size simultaneously, a fuzzy mixed integer Programming(FMIP) model has been developed in the use of fuzzy theory. And the general linear Programming software, LINDO 6.01 has been used to simulate, to evaluate the developed model with the examples and to judge of the appropriateness and adaptability of the model(FMIP) in the real world.
In this study, the $Mg(OH)_2$ slurry was made form ferro-nickel slag and then used for $CO_2$ sequestration. The experiments were in the order as leaching step, precipitation, carbonation experiments. According to the leaching results, the optimal leaching conditions were $H_2SO_4$ concentration of 1 M and the temperature of 333 K. In the $Mg(OH)_2$ manufacturing step, NaOH was added to increase the pH upto 8, the first precipitation was confirmed as $Fe_2O_3$. After removal the first precipitation, the pH was upto 11, the $Mg(OH)_2$ was generated by XRD analysis. The $Mg(OH)_2$ slurry was used for $CO_2$ sequestration. The pseudo-second-order carbonation model was used to apply for $CO_2$ sequestration. The $CO_2$ sequestration rate was increased by the $CO_2$ partial pressure and temperature. However, $CO_2$ sequestration rate was decreased when temperature upto 323 K. After $CO_2$ sequestrated by $Mg(OH)_2$, the $CO_2$ can be sequestrated stable as $MgCO_3$. This study also presented optimal sequestration condition was the pH upto 8.38, the maximum $MgCO_3$ can be generated. This study can be used as the basic material for $CO_2$ sequestration by ferro-nickel slag at pilot scale in the future.
Se-Yun Lee;Hee-Sun Jeong;Kyu-Heon Kim;Mi-Young Lee;Jung-Ho Choi;Jeong-Sun Ahn;Kwang-Il Kwon;Hye-Young Lee
Journal of Food Hygiene and Safety
/
v.39
no.2
/
pp.72-82
/
2024
This study aimed to develop a scientifically and systematically standardized xylooligosaccharide analytical method that can be applied to products with various formulations. The analysis method was conducted using HPLC with Cadenza C18 column, involving pre-column derivatization with 1-phenyl-3-methyl-5-pyrazoline (PMP) and UV detection at 254 nm. The xylooligosaccharide content was analyzed by converting xylooligosaccharide into xylose through acid hydrolysis. The pre-treated methods were compared and evaluated by varying sonication time, acid hydrolysis time, and concentration. Optimal equipment conditions were achieved with a mobile phase consisting of 20 mM potassium phosphate buffer (pH 6)-acetonitrile (78:22, v/v) through isocratic elution at a flow rate of 0.5 mL/min (254 nm). Furthermore, we validated the advanced standardized analysis method to support the suitability of the proposed analytical procedure such as specificity, linearity, detection limits (LOD), quantitative limits (LOQ), accuracy, and precision. The standardized analysis method is now in use for monitoring relevant health-functional food products available in the market. Our results have demonstrated that the standardized analysis method is expected to enhance the reliability of quality control for healthy functional foods containing xylooligosaccharide.
The Journal of Korea Institute of Information, Electronics, and Communication Technology
/
v.9
no.2
/
pp.171-177
/
2016
Software reliability in the software development process is an important issue. Software process improvement helps in finishing with reliable software product. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this study, reliability software cost model considering shape parameter based on life distribution from the process of software product testing was studied. The cost comparison problem of the Lomax distribution reliability growth model that is widely used in the field of reliability presented. The software failure model was used the infinite failure non-homogeneous Poisson process model. The parameters estimation using maximum likelihood estimation was conducted. For analysis of software cost model considering shape parameter. In the process of change and large software fix this situation can scarcely avoid the occurrence of defects is reality. The conditions that meet the reliability requirements and to minimize the total cost of the optimal release time. Studies comparing emissions when analyzing the problem to help kurtosis So why Kappa efficient distribution, exponential distribution, etc. updated in terms of the case is considered as also worthwhile. In this research, software developers to identify software development cost some extent be able to help is considered.
Kim Seung-Ho;Ha Kwon-Ick;Kim Hyeon-Sook;Kim Seon-Woo;Park Jong Hyuk;Kim Young-Min
Clinics in Shoulder and Elbow
/
v.3
no.2
/
pp.87-94
/
2000
Purpose : The purpose of this study was to evaluate the activity of the biceps brachii muscle in the vulnerable abduction and external rotation position of the shoulder in patients with anterior instability. Materials and Methods: This experimental study include a prospective analysis of the electromyographic(EMG) data on a group of patients with traumatic unilateral anterior instability of the shoulder. The EMG data of unstable shoulders was compared with those of opposite shoulders as control. The optimal sample size for the case-control study was calculated using an nQuery Advisor program(nQuery Adviser 3.0, Statisticl solutions Ltd., Ireland). The EMG analyses were conducted in 76 shoulders in 38 patients who had a traumatic anterior instability in one shoulder. The EMG records were obtained at different position of shoulder, which included 0° , 45° , 90° and 120° of shoulder abduction. In each angle of shoulder abduction, the arms were placed in an external rotation as tolerated by the anterior apprehension. The paired-sample T test was used to compare the difference of the root mean square(RMS) voltages between the stable and unstable shoulders in each degree of arm position. Results : The RMS voltage of the biceps muscle was significantly greater in the unstable shoulder than opposite stable shoulder in all position of the arm(p<0.001). The RMS voltage of the biceps was maximal at 90° and 120° of external rotation in the unstable shoulder(p<0.05). The RMS voltage of the supraspinatus muscle revealed no differences in any of the test conditions(p=0.904, 0.506, 0.119 and 0.781 in 0° , 45° , 90° and 120° , respectively) Conclusion: In the vulnerable abduction and external rotation position, the biceps muscle plays an active compensatory role in the unstable shoulder while not in the stable shoulder.
Journal of the Korean Society of Earth Science Education
/
v.11
no.1
/
pp.21-37
/
2018
The purpose of the study is to visualize the concept of water circulation in elementary school students through science behavioral system. Elementary school students found it difficult to understand concepts related to the water cycle. Most of the elementary school children think it rains because the clouds are heavier. It is most difficult to explain invisible concepts to elementary school children. Also, experiments in current textbooks are likely to disrupt scientific concepts. Accordingly, conventional water cycle, dew, fog, and cloud experiments were integrated into one system. The researchers then developed a device that allowed students to see the water's circulation at a glance. It is intended to enable integrated thinking on evaporation, condensation and precipitation. In addition, a instruction program to guide students using the system has been developed to demonstrate its effectiveness. Employing a quasi-experimental design, the participants were measured on their concepts of evaporation, condensation, and water circulation before and after participation. The findings indicated that the experiment is more effective in changing the concepts of evaporation, condensation, and water circulation than in previous experiments. Also, the optimal conditions for making use of the device were found, and there were no various experimental parameters, such as condensation.
Transactions of the Korean Society of Mechanical Engineers B
/
v.40
no.6
/
pp.397-402
/
2016
To produce adequate electricity in nuclear and thermal power plants, an optimal amount of steam should be supplied to a generator connected to high- and low-pressure steam turbines. A turbine output control device, which is a special steam valve employed to supply or interrupt the steam to the turbine, is operated using a hydraulic servo actuator. In power plants, the performance of servo actuators is degraded by the air generated from the hydraulic system, or causes frequent failures owing to an increase in the wear of the seal. This is due to the seal being burnt as generated heat using the produced compressed air. Some power plants have exhausted air using a fixed orifice, and thus they encounter power loss due to mass flow exhaust. Failures are generated in hydraulic pumps, electric motors, and valves, which are frequently operated. In this study, we perform modeling and analysis of the load-sensing air-exhaust valves, which can be passed through very fine flow under normal use conditions, and exhaust mass flow air at the beginning stage as with existing fixed orifices. Then, we propose a method to prevent failures due to the compressed air, and to ensure the control accuracy of hydraulic servo actuators.
Park, Bueyong;Lee, Sang-Ku;Jeong, In-Hong;Park, Se-Keun;Lee, Sang-Bum;Kim, Gil-Hah
Korean journal of applied entomology
/
v.58
no.4
/
pp.271-280
/
2019
We investigated the control efficacy and phytotoxicity of unmanned aerial vehicle-applied pesticides against the insect Spodoptera exigua, a major emerging pest in Chinese cabbage. Phytotoxicity was investigated in cabbage and 7 crops cultivated in the perconducted on 8 surrounding crops including Chinese cabbage at 1 to 2 times the recommended pesticide dosage. We treated cabbage fields with spinetoram suspension concentrate (16×), methoxyfenozide, sulfoxaflor suspension concentrate (16×). Then, we used water-sensitive paper to measure the distribution pattern of falling pesticide particles and the degree of coverage. Two of the pesticides showed 97% control efficacy, however, control efficacy might differ in resistant populations. Phytotoxicity was not observed in Chinese cabbage and the 7 surrounding crops treated with 1 to 2 times the recommended pesticide dosage. Analysis of the distribution pattern of falling pesticide particles revealed that breeze caused particle diffusion. Thus, wind is an important factor affecting the uniform treatment and diffusion of multicopter-applied pesticides. It follows that setting optimal conditions is necessary for effective control and treatment.
This study was peformed to find out the optimal conditions for the selection of transformed cells using already established transgenic plants. Several transgenic poplar (Populus alba$\times$P giandulosa) lines carrying npt II or hpt gene as a selectable marker were tested against kanamycin or hygromycin. Two culture explants, leaf discs and nodes, were compared regarding their sensitivity to the antibiotics. When leaf discs of untransformed control plants were cultured on callus inducing media in the presence of varying levels of kanamycin or hygromycin, only those cultured on the media containing lower than 50 mg/L kanamycin or 2 mg/L hygromycin formed callus. However, much higher concentration of kanamycin was needed to suppress the growth of axillary buds of untransformed plants. On the other hand, hygromycin at the concentration of 5 mg/L effectively suppressed shoot growth of untransformed plants. Root induction from untransformed plants could also be suppressed at the concentration of 50 mg/L kanamycin or 5 mg/L hygromycin. The transgenic plants showed resistance to 100 mg/L kanamycin or 50 mg/L hygromycin in the growth of callus, shoots, and roots. Hygromycin appeared to be more efficient in selecting untransformed cells than kanamycin.
Jeong, Hye Young;Kang, Young Suk;Go, In Hee;Yang, Eun Jeong;Choi, Kyoung Hwa
Journal of Korea Technical Association of The Pulp and Paper Industry
/
v.46
no.6
/
pp.56-62
/
2014
This study aims to investigate the applicability of supercritical fluid extraction as a dewaxing technique to restore the beeswax-treated volume of the Annals of the Joseon Dynasty in various deterioration and damage conditions. Thus, this study analyzed the dewaxing efficiency and changes in physical and morphological properties before and after dewaxing, by applying the optimal supercritical fluid extraction dewaxing condition ($70^{\circ}C$, 40 MPa, $CO_2$, Co-solvent 20% DCM, 2 hour) to 3 kinds of beeswax-treated paper with different deterioration rates (dry artificial aging of 10, 20 and 30 days at $120^{\circ}C$). After dry artificial aging at $120^{\circ}C$ for 30 days, the average molecular weight of the beeswax-treated specimen was $1.856{\times}10^5g/mol$, showing deterioration about 80% of the beeswax-treated paper before dewaxing. It was a similar level to the molecular weight of the bees-waxed volume of the Annals of the Joseon Dynasty that has a higher degree of damage. As a result of analyzing the dewaxing efficiency through FT-IR analysis, this study discovered that it was possible to effectively dewax beeswax-treated paper in the range of deterioration 20 to 80% with this supercritical fluid extraction dewaxing technique applied. As a result of analyzing changes in the physical and morphological properties before and after dewaxing, the viscosity tended to decrease to a slight degree, and since no morphological deformation or damage of stencil fibers was found, it was concluded possible to conduct stable dewaxing through this supercritical fluid extraction technique.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.