• Title/Summary/Keyword: condition setting

Search Result 684, Processing Time 0.027 seconds

Analysis on Fault Current Limiting Characteristics According to Peak Current Limiting Setting of a Flux-Lock Type SFCL with Peak Current Limiting Function (피크전류제한 설정에 따른 피크전류제한 기능을 갖는 자속구속형 초전도한류기의 고장전류제한 특성 분석)

  • Ko, Seok-Cheol
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.26 no.12
    • /
    • pp.68-73
    • /
    • 2012
  • In this paper, the fault current limiting characteristics of a flux-lock type superconducting fault current limiter (SFCL) with peak current limiting function were analyzed through its short-circuit tests. The setting condition for the peak current limiting operation was derived from its electrical equivalent circuit, which was dependent on the inductance ratio between the third coil and the first coil. Through the analysis on the short-circuit tests for the flux-lock type SFCLs with the different inductance ratio between the third coil and the first coil, the setting value for the peak current limiting operation of the flux-lock type SFCL with peak current limiting function could be confirmed to be adjusted with the variation of the inductance ratio between the third coil and the first coil.

A Study on the Surface Activation and Quick-setting Characteristics of Blast Furnace Slag (Blast furnace slag의 표면 활성화 특성 및 quick-setting 특성에 관한 연구)

  • Lee, Woong-Geol;Song, Yung-Sin;Kang, Hyun-Ju;Choi, Hun;Song, Yong-Jin
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2010.05a
    • /
    • pp.273-274
    • /
    • 2010
  • This study investigated on the early hydration and physical characteristics of blast furnace slag through pH variation. The pH values applied to the experiments were, 12.0 and 13.0 which are the pH values of OPC, and type 3 of pH 14.0 which is a strong alkali condition. A paste and mortar method was used to test blast furnace slag and blast furnace slag containing 2wt% of gypsum. It was found that CAH and CSH phases were formed as key hydrates during the early hydration of blast furnace slag, and ettringites were produced extra during the early hydration of blast furnace slag containing 2wt% of gypsum.

  • PDF

A Study on Discharge Capacity of Vertical Drain Considering with In-situ Soil Condition (원지반조건을 고려한 연직배수재의 통수능에 관한 연구)

  • Park, Min-Chul;Kim, Eun-Chul;Lee, Song
    • Journal of the Korean Geosynthetics Society
    • /
    • v.11 no.1
    • /
    • pp.47-56
    • /
    • 2012
  • Discharge capacity of PBD is sensitive in proportion to thickness and ground condition, and drainage of PBD declines due to disturbance effect in surrounding ground by mandrel used for vertical drainage setting and setting machines and type. Also, deviation of discharge capacity gets larger according to ground condition, construction condition and soil properties. But cause and analysis of those problems like reduced discharge of capacity and delayed dissipation of pore water pressure for discharge capacity is lack. Thus, in this text, ground improvement and discharge capacity is investigated by implementing composite discharge capacity test for analysis of an effect factor of PBD discharge capacity with in-situ ground condition. After fixing the vertical drain on a cylindrical cylinder, put churned sample into the cylinder. After in-situ ground and reclamation of ground are dredged, load following the loading step of 30, 70 and 120kPa using a pressure device. Result of the test, The discharge capacity was SM>ML>CL>CL(dredged soil) in situ condition and more fine-grained content, the amount of discharge was greater.

Relationships between Blossom-End Rot in Pepper and Calcium Fertilization during the First Fruit Setting Period

  • Byeon, Il-Su;Seo, Sun-Young;Chung, Jong-Bae
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.45 no.1
    • /
    • pp.79-82
    • /
    • 2012
  • Blossom-end rot is probably the most recognizable Ca deficiency that affects fruit production including pepper. We investigated the induction of blossom-end rot during the period of rapid vegetative growth and fruit setting, and the effect of Ca fertilization on the suppression of blossom-end rot in pepper plants grown in a plastic-film house. During the first fruit setting period, more than 60% of pepper fruits larger than 8 cm showed the symptoms of blossom-end rot. Under the condition of transpiration occurring at a much faster rate, growing leaves of pepper plants could be the greater sinks for Ca than developing fruits. The incidence of blossom-end rot was significantly decreased after two weeks of Ca fertigation. Calcium application during the rapid vegetative growth and fruit setting period could be suggested as a preventive step to overcome the local Ca deficiency inducing blossom-end rot of pepper fruits.

Ergodicity of Nonlinear Autoregression with Nonlinear ARCH Innovations

  • Hwang, S.Y.;Basawa, I.V.
    • Communications for Statistical Applications and Methods
    • /
    • v.8 no.2
    • /
    • pp.565-572
    • /
    • 2001
  • This article explores the problem of ergodicity for the nonlinear autoregressive processes with ARCH structure in a very general setting. A sufficient condition for the geometric ergodicity of the model is developed along the lines of Feigin and Tweedie(1985), thereby extending classical results for specific nonlinear time series. The condition suggested is in turn applied to some specific nonlinear time series illustrating that our results extend those in the literature.

  • PDF

Tool Condition Monitoring Based on Wavelet Transform

  • Doyoung Jeon;Lee, Gun;Kim, Kyungho
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2002.10a
    • /
    • pp.95.5-95
    • /
    • 2002
  • Tool condition monitoring is recognized important in CNC machining processes since the excessive wear or breakage of tool has to be noticed immediately in an automated manufacturing system to keep the quality and productivity. In this research, as an economic way of detecting the status of tool change, the wavelet transform has been applied to the measurement of spindle motor current. The energy of a specific level shows the difference between a normal tool and worn one. By setting a limit on the change of energy, it is possible to notify the time to inspect the tool.

  • PDF

ON A TWO WEIGHTS ESTIMATE FOR THE COMMUTATOR

  • Chung, Daewon
    • East Asian mathematical journal
    • /
    • v.33 no.1
    • /
    • pp.103-113
    • /
    • 2017
  • We provide quantitative two weight estimates for the commutator of the Hilbert transform under certain conditions on a pair of weights (u, v) and b in $Carl_{u,v}$. In [10] and [11], Bloom's inequality is shown in a modern setting, and the boundedness of the commutators is provided by assuming both weights u, v are $A_2$ and $b{\in}BMO_{\rho}$. In the present paper we show that the condition on b can be replaced by $Carl_{u,v}$ by using the joint $A^d_2$ condition.

An Optimality Approach to NPI Constructions

  • Moon, Seung-Chul;Sohng, Hong-Ki
    • Journal of English Language & Literature
    • /
    • v.55 no.3
    • /
    • pp.459-474
    • /
    • 2009
  • The Journal of English Language and Literature. The purpose of this study is to provide an optimality theoretic approach to NPIs (Negative Polarity Items) in English and Korean by proposing three universal constraints. The constraints are C-command Condition (CCC): NPI must be c-commanded by a constituent with negative meaning; Locality Condition (LOC): NPI must be bound in the local domain; Subjacency: NPI licensing must satisfy Subjacency Condition (SBJ); Previous analyses have shown that these three constraints control NPIs in one way or another. This study attempts to demonstrate that NPIs in both English and Korean languages can be nicely accounted for by setting a different constraint hierarchy for the two independent languages. That is, by slightly changing the constraint hierarchy, distributional differences of NPIs in both languages can be accounted straightforwardly within the framework of Optimality Theory.

NORM AND ESSENTIAL NORM ESTIMATES OF TOEPLITZ OPERATORS ON THE BERGMAN SPACE

  • Choe, Boo-Rim;Lee, Young-Joo
    • Communications of the Korean Mathematical Society
    • /
    • v.11 no.4
    • /
    • pp.937-958
    • /
    • 1996
  • On the setting of product of balls we consider Toeplitz operators, with symbols satisfying a certain condition, on the Bergman space. Norms and essential norms of such operators are estimated by means of certain integral quantities.

  • PDF