• Tribology and Lubricants
• /
• v.23 no.6
• /
• pp.301-305
• /
• 2007

The wear particle analysis has been known as very effective method to foreknow and decide a moving situation and a damage of machine parts by using the digital computer image processing. But it was not laid down and trusted to calculate shape parameters of wear particle and wear volume. In order to apply image processing method in the foreknowledge and decision of lubricated condition, it needs to verify the reliability of the calculated data by the image processing and to lay down the number of images and the amount of wear particle in one image. In this study, the lubricated friction experiment was carried out in order to establish the optimum image capture with the SM45C specimen under experiment condition. The wear particle data were calculated differently according to the number of image and the amount of wear particle in one image.

• Journal of the Korean Society of Safety
• /
• v.29 no.3
• /
• pp.14-19
• /
• 2014

The global demand for reduction in the weight of automobiles has led many countries to focus on the development of hybrid, eco-friendly, and electric cars. Reduction in the weight of materials can both increase fuel efficiency and maximize automobile performance. Therefore, the design of automobile should be inclined towards the safety aspects. but at the same time, it also consider reducing the structural weight of an automobile. In this study, CFRP side members with circular and double hat shaped section was manufactured. The impact collapse tests performed with change of the stacking condition, such as variation of interface number and outerlayer angle. The impact collapse load and absorbed energy were quantitatively analyzed according to the changes in section shapes and stacking condition. This analysis was performed to obtain design data that can be applied in the development of optimum lightweight members for automobiles.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.4
• /
• pp.288-292
• /
• 2006

Many authors have studied several concepts of fuzzy systems. Balasubramaniam and Muralisankar (2004) proved the existence and uniqueness of fuzzy solutions for the semilinear fuzzy integrodifferential equation with nonlocal initial condition. Recently, Park, Park and Kwun (2006) find the sufficient condition of nonlocal controllability for the semilinear fuzzy integrodifferential equation with nonlocal initial condition. In this paper, we study the existence and uniqueness of solutions for the semilinear fuzzy integrodifferential equations with nonlocal condition and forcing term with memory in $E_{N}$ by using the concept of fuzzy number whose values are normal, convex, upper semicontinuous and compactly supported interval in $E_{N}$.

• Journal of the Korean Home Economics Association
• /
• v.48 no.2
• /
• pp.85-94
• /
• 2010

Comparative analysis of marker efficiency in blouse patterns, based on different sleeve designs, was carried out. Sleeve designs used included set-in-sleeve, laglan sleeve, and epaulet sleeve. The two types of epaulet sleeves, A and B, are based on pattern arrangement methods of center back. Cloth and production conditions are the width of cloth, the number of marking pieces, and the direction for marking deployment. A blouse pattern saved to the PAD CAD System was graded with different sizes and arranged for industrial purpose to calculate the marker efficiency in different conditions. The results were as follows. On the whole, the marker efficiency of small pattern sized set-insleeve was higher than laglan and epaulet sleeve designs. It was also established that marker efficiency is dependent on cloth and production conditions. For small number of marking pieces, efficiency was higher in the condition of 110cm cloth widths compared with that condition of 150cm cloth widths. However the efficiency of large number of marking pieces was higher in the condition of 150cm cloth widths.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.6
• /
• pp.835-845
• /
• 1999

The objective of the present study was to investigate heat and mass transfer characteristics in a vertical falling film type absorber using LiBr-$H_2O$ solution with 6owt%. The experimental apparatus consisted of an absorber with inner diameter of 17.2 mm and length of 1150mm, a generator, an evaporator/condenser, a solution tank, a sampling trap etc. The parameters were solution temperature of 45 and $50^{\circ}C$, coolant temperature of 30 and $35^{\circ}C$, and film Reynolds numbers from 50 to 150. Pressure drop in the absorber increased as solution and coolant temperatures decreased. Pressure drop in the absorber increased up to the film Reynolds number of 90, and then decreased at the further increase of the Reynolds number above 90. The maximum absorption mass flux observed at the film Reynolds number of 90. Absorption mass flukes increased as coolant temperature decreased. Absorption mass fluxes and heat transfer coefficients under subcooled condition were larger than those under superheated condition. Heat transfer coefficients were affected by solution temperature more than coolant temperature. The maximum absorption effectiveness under the subcooled condition was 23% for coolant temperature of $30^{\circ}C$ and 31% for coolant temperature of $35^{\circ}C$ under the present experimental conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.909-914
• /
• 2005

This study was conducted to estimate phenotypic and genetic parameters of body condition score (BCS) and reproductive traits in Hanwoo cows. DFREML procedures were applied to obtain variance-covariance components and heritability estimates with single or two-trait models. Estimates of phenotypic correlations of BCS at service with BCS at calving was 0.16 and 0.26 with calving interval, 0.08 with gestation length, and 0.06 with number of services per conception, respectively. Estimates of phenotypic correlation of BCS at calving was 0.10 with calving interval, 0.13 with gestation length, and 0.10 with number of services per conception, respectively. Estimates of phenotypic correlation were low and negative, -0.11 between calving interval and gestation length and -0.13 between gestation length and number of services per conception. Estimates of direct genetic correlation were -0.06, between BCS at service and BCS at calving, 0.37 between BCS at service and BCS at weaning, and -0.18 between BCS at calving and BCS at weaning. Estimates of direct genetic correlation of days from calving to the 1st service were 0.17 with number of services per conception and -0.21 with BCS at service. Estimates of direct genetic correlation for BCS at calving were -0.02 with number of services per conception and -0.08 with BCS at service. Estimates of direct genetic correlation for BCS at weaning were 0.02 with number of services per conception and -0.07 with BCS at service. Estimates of direct heritability from single trait analyses were 0.13 for BCS at service, 0.20 for BCS at calving, 0.02 for BCS at weaning, and 0.20 for number of service per conception, respectively. Estimates of direct heritability were 0.20 for birth weight and 0.10 for weaning weight.

• Journal of applied mathematics & informatics
• /
• v.17 no.1_2_3
• /
• pp.401-418
• /
• 2005

In this paper, a dual algorithm, based on a smoothing function of Bertsekas (1982), is established for solving unconstrained minimax problems. It is proven that a sequence of points, generated by solving a sequence of unconstrained minimizers of the smoothing function with changing parameter t, converges with Q-superlinear rate to a Kuhn-Thcker point locally under some mild conditions. The relationship between the condition number of the Hessian matrix of the smoothing function and the parameter is studied, which also validates the convergence theory. Finally the numerical results are reported to show the effectiveness of this algorithm.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.4
• /
• pp.1241-1252
• /
• 2015

In this paper, we study the dynamical bifurcation of the modified Swift-Hohenberg equation on a periodic interval as the system control parameter crosses through a critical number. This critical number depends on the period. We show that there happens the pitchfork bifurcation under the spatially even periodic condition. We also prove that in the general periodic condition the equation bifurcates to an attractor which is homeomorphic to a circle and consists of steady states solutions.

• Journal of applied mathematics & informatics
• /
• v.20 no.1_2
• /
• pp.1-16
• /
• 2006

The classical perturbation theory is extended to the weighted Kronecker product linear systems $W(A{\bigotimes}B)W\chi=h$. Upper bounds are derived for the normwise condition number.

• Korean Journal of Mathematics
• /
• v.18 no.2
• /
• pp.201-211
• /
• 2010

We investigate the number of the nontrivial solutions of the nonlinear biharmonic equation with Dirichlet boundary condition. We give a theorem that there exist at least three nontrivial solutions for the nonlinear biharmonic problem. We prove this result by the finite dimensional reduction method and the shape of the graph of the corresponding functional on the finite reduction subspace.