• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.67-70
• /
• 2010

X-ray absorption rate and multiplication factor of X-ray detector were calculated with Garfield code. High Z (= atomic number) was important factor to increase the absorption rate but low Z is also important to increase the multiplication. Five different gas composition were examined under the condition of 1400 V bias and 400 um gap. Xe 100% gas showed the highest absorption rate and He 96% + isobutene 4% showed the highest multiplication.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.555-556
• /
• 2007

Through the single head kinematics, sliding distance is a movement of a pad within wafer. The sliding distance is very important to frictional heat, material removal, and so on. A Temperature distribution is similar to sliding distance. But is not same. Because of complex process factor in CMP. A platen velocity is a dominant factor in a temperature and material removal. WIWNU is low in head faster condition.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.23-28
• /
• 2015

The detection field is an important sector of the factors influencing the battle field. Basically, The radar emits a radio wave to perform the detection in the existing way. However, When most existing radars identify target by signal processing to return radio wave, Environmental attenuation factor does not reflected. The radar using this radio wave has got the possibility changing detect result depending on attenuation factor by environmental conditions, The operational problems may arise in a real battle field. Therefore, In this paper, When emitted radio waves were come back, Reflecting the environmental attenuation factor, Experimental attempts to identify the target to enable more accurately.

• Fisheries and Aquatic Sciences
• /
• v.23 no.6
• /
• pp.16.1-16.10
• /
• 2020

This study was conducted in Lake Hayq between January and December 2018. The objectives of this study were to determine the growth, condition, sex ratio, fecundity, length at first sexual maturity (L₅₀), and spawning seasons of common carp (Cyprinus carpio). Monthly fish samples of C. carpio were collected using gillnets of stretched mesh sizes of 4, 6, 7, 8, 10, and 13 cm and beach seines of mesh size of 6 cm. Immediately after the fish were captured, total length (TL) and total weight (TW) for each individual were measured in centimeters and grams, respectively, and their relationship was determined using power function. Length at first maturity (L₅₀) was determined for both males and females using the logistic regression model. The spawning season was determined from the frequency of mature gonads and variation of gonadosomatic index (GSI) values of both males and females. Fecundity was analyzed from 67 mature female specimens. The length and weight relationship of C. carpio was TW = 0.015TL^2.93 for females and TW = 0.018TL^2.87 for males that indicate negative allometric growth in both cases. The mean Fulton condition factor (C_F) was 1.23 ± 0.013 for females and 1.21 ± 0.011 for males. The value of C_F in both cases was > 1 that shows both sexes are in good condition. Among the total 1055 C. carpio collected from Lake Hayq, 459 (43.5%) were females and 596 (56.5%) were males. The chi-square test showed that there was a significant deviation between male and female numbers from 1:1 ratio (χ²= 22, df = 11, P > 0.05) within sampling months. The length at first sexual maturity (L₅₀) for females and males were 21.5 and 17.5 cm, respectively. Males mature at smaller sizes than females. The spawning season of C. carpio was extended from February to April, and the peak spawning season for both sexes was in April. The average absolute fecundity was 28,100 ± 17,462. C. carpio is currently the commercially important fish while Nile tilapia fishery has declined in Lake Hayq. Therefore, this baseline data on growth, condition, and reproductive biology of common carp will be essential to understand the status of the population of carp and design appropriate management systems for the fish stock of Lake Hayq, Ethiopia, and adjacent countries.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.683-689
• /
• 2014

The present study conducted a parameter effect analysis of low-frequency squeal noise using a numerical simulation. The finite element program ABAQUS was used to calculate the dynamic instability based on a complex eigenvalue analysis. A total of five parameters, including the chassis, wear, piston, material property, and contact condition, were selected to identify the factor effects on a low-frequency squeal noise between 2.5 and 3.1 kHz. The present study found the dominant level of each factor through an analysis of the means in the context of the experiment design.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.18
• /
• pp.8519-8524
• /
• 2016

After diagnosis of cancer, many patients show more inclination towards religion and religious activities. This qualitative study using semi-structured interviews explored the perspectives and experiences of 17 Iranian cancer patients and their families regarding the role of religion in their adaptation to cancer in one of the hospitals in Tehran and a charity institute. The content analysis identified two themes: "religious beliefs" (illness as God's will, being cured by God's will, belief in God's supportiveness, having faith in God as a relieving factor, and hope in divine healing) and "relationship with God during the illness." In general, relationship with God and religious beliefs had a positive effect on the patients adapting to their condition, without negative consequences such as stopping their treatment process and just waiting to be cured by God. Thus a strengthening of such beliefs, as a coping factor, could be recommended through religious counseling.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.3
• /
• pp.298-306
• /
• 2005

Objectives : To develop measurement scales of Internet addiction, and propose a Korean Internet Addiction Index (K-IAI) and classification criteria for Internet addiction from the threshold scores developed. Methods : The identification of the concept of 'Internet addiction' was based on the literature review. To select the scales, an exploratory factor analysis was applied. A construct validation was tested by a confirmatory factor analysis (CFA) with a structured equation model (SEM). In testing the validity of the classification criteria, ANOVA and non-recursive models with SEM were applied. Results : Out of 1,080 questionnaires distributed, 1,037 were returned,; a response rate of 96%. The Cronbach-$\alpha$ of all items was over 0.75. Using an exploratory factor analysis in the condition of a 6 factor constrain as the study model proposed, 23 of the initial 28 items were identified. In testing the discriminant and convergent validity of the selected 23 scales using CFA with SEM, the Internet addiction model explained about 93% of all variances of the data collected, and all the latent variables significantly explained the designated scales. A K-IAI was proposed using the T-scores of the sum of all factor averages. In the classification of users, the basic concept was a twostandard deviation approach of the K-IAI as the criteria of MMPI. The addiction group had a score ${\geq}70$ in the K-IAI, the pre-addiction group between ${\geq}50$ and <70, and the average user group <50. The Internet use times of the classified groups were statistically different in the ANOVA and multiple comparisons. Conclusions : The K-IAI is a reliable and valid instrument for measuring Internet addiction. Moreover, the taxonomy of the groups was also verified using various methods.

• Journal of Korean Society on Water Environment
• /
• v.33 no.6
• /
• pp.650-660
• /
• 2017

In this study, pollutant emission characteristics by water damage period analyzed 11 items (water temperature, pH, DO, EC, BOD, COD, TOC, SS, T-N, T-P and flow) with load duration curve, time series load curve and factor analysis for three years (2014-2016). Load duration curve is applied to judge the level of impaired waterbody and estimate impaired level by pollutants such as BOD and T-P in this study depending on variation of stream flow. Water quality standard exceeded the flow of mid-range and low-range by flow condition evaluation using load duration curve. This watershed was influenced by point source more than non-point source. Cumulative excess rate of BOD and T-P kept water quality standard for all seasons (spring, summer, autumn and winter) except BOD 59% in spring. Water quality changes were influenced by pollutants of basic environmental treatment facilities and agricultural areas during spring and summer. Results of factor analysis were classified commonly first factor (BOD, COD, and TOC) and second factor (flow, water temperature and SS). Therefore, effects of artificial pollutants and maintenance water must be controlled seasonally and reduced relative to water damage caused by point pollution sources with effluent standard strengthened in the target watershed.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.562-570
• /
• 1995

The recent ABB/CE(Asea Brown Boveri Combustion Engineering) type pressurized oater reactor-s have the on-line monitoring system, i.e., the COLSS(core operating limit supervisory system), to prevent the specified acceptable fuel design limits from being violated during normal operation and anticipated operational occurrences. One of the main functions of COLSS is the on-line monitoring of the DNB(departure from nucleate boiling) overpower margin by calculating the MDNBR(mini-mum DNB ratio) for the measured operating condition at every second. The CETOP-D model, used in the MDNBR calculation of COLSS, is benchmarked conservatively against the TORC mod-el using an inlet flow factor of hot assembly in CETOP-D as an adjustment factor for TORC. In this study, a technique to optimize the CETOP-D inlet flow factor has been developed by elim-inating the excessive conservatism in the ABB/CE's. A correlation is introduced to account for the actual variation of the CETOP-D inlet flow factor within the core operating limits. This technique was applied to the core operating range of the YongGwang Units 3&4 Cycle 1, which results in the increase of 2％ in the DNB overpower margin at the normal operating condition, compared with that from the ABB/CE method.

• Korean Journal of Weed Science
• /
• v.32 no.1
• /
• pp.17-24
• /
• 2012

The study was conducted to investigate the effect of weed interference and starter fertilizer on subsequent soybean seed quality at the Agricultural Research Farm and Laboratory of Razi University, Kermanshah, Iran. Two factorial experiment was laid-outon a randomized complete block design with four replications. First factor was starter fertilizer levels (0 and 25 kg $ha^{-1}$) applied in the forms of monoammonium phosphate, the second factor was different weed interference periods consisted of five initial weed-free periods (in which, plots were kept free of weeds for 0, 15, 30, 45 and 60 days after crop emergence (DAE) and then weeds were allowed to grow until harvest) and five initial weed-infested periods (in which, weeds were allowed to grow for 0, 15, 30, 45 and 60DAE, after which the plots were kept free of weeds until harvest). Full season weedy condition reduced 100-seed weight, seed germination percentage and seedling dry weight by 25.9, 13.3 and 22.5%, respectively and increased mean germination time and seed electrical conductivity by 55.8 and 24.3%, respectively as compared with full season weed-free control. However, the traits under study were not significantly influenced when field was kept free of weeds for at least 45 DAE (R1) or weedy condition was continued for less than 30 DAE (V8). There was a significant and negative correlation between weed biomass and seed weight (r = -0.93), so that when weed free condition was less than 45 DAE or weed infested period was continued for at least 30 DAE, soybean plants produced wrinkled and underdeveloped seeds with lower weights and qualities. Moreover, soybean seed quality reduction due to weed interference was more evident when starter fertilizer was applied and weeds interfered with soybean from the beginning of the growing season. Information from the present study is beneficial in soybean seed production systems and where farmers use the harvested seeds for the following planting.