• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.877-887
• /
• 2020

A 3-Dimensional hydrodynamic and water quality model was applied to evaluate the effects of weir gate operations on water quality and harmful algal bloom (HAB) occurrences at selected locations in the Nakdong River, Geum River, and Yeongsan River. For the Geum River and Yeongsan River, when the gates are left open, annual and summer Chl-a and HABs were decreased at upstream locations, Sejong Weir and Seungchon Weir, but summer average concentrations of Chl-a and HABs were increased at downstream locations, Baekje Weir and Juksan Weir. For the open scenario, the reduced hydraulic residence time in the upper stream areas of the Geum River and Yeongsan River would allow less available time for nutrient consumption that would result in higher dissolved inorganic phosphorus concentrations followed by higher algal growth in the downstream areas. However, in the case of the Nakdong River, both annual and summer Chl-a and HABs were increased in all locations for the open scenario. This condition seems to be resulted in due to increased light availability by reduced water depths. Changes in Chl-a and HABs occurrences due to the water gate control in the study sites are different due to differences in physical, chemical, and biological conditions in each location.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.523-528
• /
• 2007

The objectives of this research are to investigate the mechanism of coagulation affecting UF, find out the effect of metal salt coagulant on membrane fouling. Either rapid mixing + UF or slow mixing + UF process caused much less flux decline. For PACl coagulant, the rate of flux decline was reduced for both hydrophilic and hydrophobic membrane than alum due to higher formation of flocs. In addition, the rate of flux decline for the hydrophobic membrane was significantly greater than for the hydrophilic membrane, regardless of pretreatment conditions. In general, Coagulation pretreatment significantly reduced the fouling of the hydrophilic membrane, but did little decrease the flux reduction of the hydrophobic membrane. When an Al(III) salt is added to water, monomers, polymers, or solid precipitates may form. Different Al(III) coagulants (alum and PACl) show to have different Al species distribution over a rapid mixing condition. During the rapid mixing period, for alum, formation of dissolved Al(III) (monomer and polymer) increases, but for PACl, precipitates of $Al(OH)_{3(s)}$ increases rapidly. This experimental results pointed out that precipitates of $Al(OH)_{3(s)}$ rather than dissolved Al(III) formation is major factor affecting flux decline for the membrane.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.2
• /
• pp.128-135
• /
• 2013

The purpose of this study is a suggestion that it is a way for conservation and management the Namgye Seowon's heritage value based on its landscape visibility and land use; Namgye Seowon is a world heritage registration object. To do this, We had done a field investigation and a literature examination. The investigations are as following; first, setting protection zone through a comprehensive approach beyond uniform cultural properties protection zone is to note current intellectual situations as well as the place related to the locational characteristics and figures of Namgye Seowon. It's to set fore seeable section of landscape by analyzing visibility focusing through on Pungyeongnu, and it consider with protection zone and the present condition of land use. Especially, external view of landscape in Namgye Seowon is visualized with Baekam-san in the distance view of it and Cheonhwang-bong in Daebong-san and nearby large soundproof walls and the towers acts as an impediment factor to the view of landscape. In addition, to recover the original view of landscape of the Namgye Seowon, reckless plans focusing the authenticity of the world heritage should be limited and in case of the vegetation landscape, restoration and maintenance will be made through historical research literature. Through this study, researches on Namgye Seowon and several seowons will be done actively and its aims are to become the framework of landscape conservation and management measures to meet world heritage criteria.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.569-581
• /
• 2016

The purpose of this study was to define the quality of nursing services in relation to a nurse's psychosocial factors (type A behavior pattern, self-esteem, locus of control, and anxiety), job stress, and fatigue. This study targeted 503 nurses currently working at one of six general hospitals in Daejeon city, the data were collected by a self-administered questionnaire, which was surveyed from April 1 to June 30, 2014. According to multivariate logistic regression analysis, the high self-esteem, locus of control, and strong support by supervisor and co-workers decrease the risk of a low career quality. In contrast, high situational fatigue and overall fatigue increase the risk of a low career quality. According to the results of hierarchical multiple regression analysis, the quality of nursing services increased with age, the subjective health condition was satisfying, aptitude corresponded to the jobs, self-esteem was high, anxiety was low, support by co-workers was strong, and the overall fatigue was low. Above results suggest that the quality of nursing services of nurses who work at a general hospital has a strong correlation with the psychosocial factors, job stress, and fatigue.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.33-43
• /
• 2006

The purpose of this study was to eximine the effect of different yam twisting methods on mechanical properties and 3D CAD images of plain knitted fabrics made of composite yarns. Six yams were used in this study: four different composite yams of the six consist of acetate and functional polyester (Poly-m) with the ratio of 70:30, and the rest two are the original acetate $100\%$ yam and the poly-m $100\%$ yarn. The four kinds of composite yarns were processed in combinations of twisting processes such as interlacing, false twisting, two for one twisting, combined twisting and single covering, and the two original yams were knitted without any twisting process. Sixteen mechanical properties of all the six knitted fabrics, knitted under the same knitting conditions, were measured by KES-FB system with the outer knit condition. The results were as follows; 1) When the sample applied with the false twisting process at the temperature as high as $220^{\circ}C$, ENT, B, HB, G and RC values of samples increased which leads to increasing dimensional stability. 2) To gain the high bending and shear properties in the single covering process, selecting the core yarn with such properties is the most important factor. 3) Interlacing process effected to increase RC value. 4) False twisting process after interlacing process gave bulkiness and un-interlaced part in yam was increased SMD value. The SMD value of the kilted fabric of the composite yarn, which was put through the combined twist process, was higher than those of which simple process such as the two for one twist or the single covering process applied. In order to achieve the silk-like surface feel of knitted fabric, the sin91e covering process is recommended. 5) Examining the simulation images of the knifed fabrics of composite yarn, which were generated by the 3D CAD system based on the mechanical properties of the fabric, led that appearance could be changed as different twisting methods were applied.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.605-613
• /
• 1992

NCO-terminated prepolymers were synthesized by reacting carbonate-type polyol(PTMCG)($M_w=1,000$ and 2,000) with MDI and N-methyldiethanolamine, as a chain extender. Carbonate-type polyurethane containg zwitterionic group was prepared by reacting the prepolymer with 1,3-propane sultone. From the IR and NMR spectra of model reactions, it was known that the ionization occurred under the same condition. The structure of zwitterionic carbonate-type polyurethane(ZPU) therefore could be confirmed from the model reactions. Glass transition temperature(Tg) ranged between $-15{\sim}-30^{\circ}C$ from the thermal data. Tg was between $-15{\sim}-18^{\circ}C$ for a series of ZPU10 samples and between $-25{\sim}-26^{\circ}C$ for a series of ZPU20 polymers. Tensile strength increased with mole ratio of ionic content. On the contrary, elongation was rather dropped with mole ratio of ionic content. ZPU10-30 having better tensile strength and less elongation was selected as a membrane for the concentration of ethanol aqueous solution through pervaporation. To obtain the better selectivity, it was crosslinked with HMDI. In the swelling test, it showed the higher swelling degree at around 50wt% ethanol concentration due to the plastization effect of ethanol. To optimize the separation capacity, two operating factors-feed concentration and temperature-were considered. The overall separation capacity was as follows : separation factor, 2~83.2 ; the flux, $25.4{\sim}58.8g/m^2hr$.

• Journal of Hospice and Palliative Care
• /
• v.22 no.4
• /
• pp.156-165
• /
• 2019

Purpose: This study was conducted to identify subjective attitudes towards terminal patients in nursing students who had clinical practice. The types of subjective attitude were classified by applying Q methodology. According to those types, basic reference data for the development of educational programs were provided. Methods: Thirty-four final Q samples were selected, and Q classification with a nine-point scale was performed with P samples of 43 nursing students. A key factor analysis was conducted with the collected data using the PC QUANAL program. Results: Nursing students' attitudes towards terminal patients were grouped into three types. The total variable was 49.96%. Students with Type 1 ("wish for life-sustaining medical treatment") thought that terminal patients accurately understood their medical condition and wanted to prolong their lives. Others with Type 2 ("need for service and support") believed that a multidisciplinary nursing system needs to be established to help terminal patients prepare for death. Students with Type 3 ("awareness and acceptance of death") thought that terminal patients wanted to die with dignity at a hospice unit. Conclusion: This study analyzed various types of attitude towards terminal patients, as perceived by nursing students with clinical training experience. Development of educational programs for each attitude type analyzed in this study could contribute to systematic training programs for nursing students caring for terminal patients.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.5
• /
• pp.57-63
• /
• 2013

In this study, the characteristics of degradation and mineralization of diazinon using a statistical approach based on Box-Behnken design (BBD, one of response surface method) was investigated in an E-beam process, and also the main factors with diazinon concentration ($X_1$), irradiatin intensity ($X_2$) and pH ($X_3$) which consisted of 3 levels in each factor was set up to determine the effects of factors and optimization. At first, effects of pH and diazinon concentration were investigated to determine the proper range of application on response surface method(RSM). In statistical approach, the regression analysis and analysis of variance (ANOVA) were applied to evaluate the quantitative comparison of each factors in order to obtain the effects were irradiation intensity>diazinon concentration>pH. The regression model predicted the optimization point using the response optimizer to consider the effects of operation conditions were $Y_1=81.73-5.58X_1+23.69X_2-14.23X{_2}^2+4.22X{_3}^2(R^2=99.7%)$, $Y_2=35.23-3.01X_1+10.79X_2-7.58X_2{^2}(R^2=97.9%)$ and 95.7% of diazinon degradation, 41.8% of TOC reduction at 12.75mg/L and 4.26kGy, respectively. The pH condition was not significantly affects on E-beam process than other advanced oxidation processes (AOPs).

• Journal of Aquaculture
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2007

Two feeding experiments were conducted to investigate the effects of fermented cactus fruit (Opuntia ficusindica) fluid (FCFF) as a feed additive to a commercial diet on the growth of red sea bream, Pagrus major, and to determine an effective dose. FCFF was prepared by mixing crushed cactus fruit with a starch solution and commercially available microorganisms for 2 weeks at room temperature. Three triplicate groups of red sea bream had initial mean weights of 84.1 g (Exp-1) and 5.1 g (Exp-2) and were fed experimental diets containing 0%, 1%, and 5% FCFF for 2 months (Exp-1) and 0%, 0.2%, 0.5%, and 1% FCFF for 3 months (Exp-2), respectively. In experiment 1, the mean body weight of fish fed the diet containing 1% FCFF was significantly higher (P<0.05) than that of fish fed the diet without FCFF. The survival rate was highest in fish fed the diet containing 1% FCFF, although the difference was not statistically significant. The feed gain ratio (FGR), specific growth rate (SGR), and condition factor (CF) values of fish fed the diet containing 1% FCFF were higher than those of fish in the other dietary groups that received lower levels of FCFF. The daily feeding rate (DFR) of fish fed the diet containing 1% FCFF was slightly lower but not statistically different than the DFR values of fish in the other dietary groups. In experiment 2, the final mean body weight of fish fed the diet containing 1% FCFF was significantly (P<0.05) higher than the mean weight of fish in the control group. The FGR, SGR, and CF values of fish fed the diet containing 1% FCFF were better than the values from fish in the other dietary groups that received lower levels of FCFF, although the differences were not statistically significant. However, the DFR of fish fed the diet containing 1% FCFF was lower than those of fish in the other groups. These results suggest that FCFF could be used as a feed additive in commercial fish food and a preferable level of supplementation is at least 1.0% in fingerling and young red sea bream.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.63-70
• /
• 2015

In this paper, we estimate the life cycle from acceleration life test about the hard disk of disk array of image storage of PACS. Webuil distribution was selected by the Anderson-Darling goodness-of-fit test with data of down time at $50^{\circ}C$ and $60^{\circ}C$. The equality test of shape parameter and scale parameter was conducted, so that the probability distribution estimated from data of down time at $50^{\circ}C$ and $60^{\circ}C$ was not statistically significant. The shape parameter was 1.0409, The characteristic life was 24603.5 hours at normal user condition($30^{\circ}C$) by the analysis of weibull-arrhenius modeling which included the acceleration factor of temperature, and The activation energy was 0.5011 eV through arrhenius modeling. The failure analysis of the failure samples of acceleration test and the samples of market return was conducted, so that the share percentage of failure mode was detail difference but the rank of share percentage was almost same. This study suggest the test procedure of acceleration test of hard disk drive in PACS using environment, and help the life estimation at manufacture and use.