• Journal of Power Electronics
• /
• 제2권3호
• /
• pp.162-170
• /
• 2002

Voltage sag detection algorithm for voltage sag corrector is proposed in this paper. To quantify the standard of voltage unbalance under the faulted conditions, the 3-phase unbalanced voltages are decomposed into two balanced 3-phase symmetrical components of the positive and negative sequence voltages, which is defined by the magnitude factor (MF) and unbalance factor (UF). It is analyzed that MWF and UF values are given as the dc constant values even though under the voltage unbalance condition. This paper also proposes the control scheme of the instantaneous voltage sag corrector based on this detection algorithm. The validity of the proposed algorithm is verified through the EMTDC simulation and experiments.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.443-448
• /
• 1998

With using artificial neural networks (ANNs), an analytical study related to the heated length effect on critical heat flux(CHF) has been carried out to make an improvement of the CHF prediction accuracy based on local condition correlations or table. It has been carried out to suggest a feasible criterion of the threshold length-to-diameter (L/D) value in which heated length could affect CHF. And within the criterion, a L/D correction factor has been developed through conventional regression. In order to validate the developed L/D correction factor, CHF experiment for various heated lengths have been carried out under low and intermediate pressure conditions. The developed threshold L/D correlation provides a new feasible criterion of L/D threshold value. The developed correction factor gives a reasonable accuracy fur the original database, showing the error of -2.18% for average and 27.75% for RMS, and promising results for new experimental data.

• Natural Product Sciences
• /
• 제21권2호
• /
• pp.141-145
• /
• 2015

Hesperidin, which is the most abundant flavonoid of Citrus unshiu (Rutaceae), has been reported to possess diverse activities and widely used as functional foods and cosmetics. For the development of functional products, extraction procedure is indispensable. Extraction conditions affect the composition of extract as well as its biological activity. Therefore, we tried to optimize extraction conditions such as extraction solvent, extraction time and extraction temperature for maximum yield of hesperidin using response surface methodology with threelevel-three-factor Box-Behnken design (BBD). Regression analysis showed a good fit of the experimental data and the optimal condition was obtained as ethanol concentration, 59.0%; temperature $71.5^{\circ}C$ and extraction time, 12.4 h. The hesperidin yield under the optimal condition was found to be $287.8{\mu}g$ per 5 mg extract, which was well matched with the predicted value of 290.5 μg. These results provides optimized extraction condition for hesperidin and might be useful for the development of hesperidin as functional products like health supplements, cosmetics and medicinal products.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.643-650
• /
• 2004

In general, slope failures are occurred by the interaction among various factors(slope shape, hydraulic condition, and geologic condition, etc.). In the area where has a heavy rainfall, a great portion of slope failures are caused by seepage increasement with suitable failure condition. Many studies have been performed to find the cause of large-scale failures. In this study, three Cut-Slope failures caused by typhoon 'MAEMI' were investigated to find out factors causing large-scale slope failures. It was confirmed in this research that major reason of slope failures was the weak layer working along with other unstable factor. The large-scaled investigation concerning Cut-Slope will be needed to find out the Weak Layer.

• 생물정신의학
• /
• 제10권1호
• /
• pp.62-69
• /
• 2003

Corticotropin-releasing factor(CRF) and neuropeptide Y(NPY) are known to play important roles in mediating stress responses and stress-related behavior. To elucidate the role of neuropeptides in response to the condition that had paired with traumatic event, we observed the changes of CRF and NPY by immunohistochemistry using a conditioned footshock paradigm. Male Sprague-Dawley rats were placed in a shuttle box and exposed to 20 pairings of a tone(< 70dB, 5sec) followed by a footshock(FS, 0.8mA, 1sec) over 60min. A second group was exposed to the tone-footshock pairings, returned to the homecage for 2days, and then reexposed to the test chamber and 20tones alone for 60min, prior to sacrifice. Control groups were : a) sacrificed without exposure to FS ; b) exposed to the tone-footshock pairings and then sacrificed two days later ; or c) exposed to the chamber and tones alone, returned to the homecage for 2days and then reexposed to the chamber and 20tones over 60min prior to sacrifice. CRF was increased in animals exposed to FS or the aversive condition(context and tone) that had paired to FS in bed nucleus of the stria terminalis (BNST) compared to the control. NPY was increased by FS in amygdala and PVN, but the condition previously associated with FS results in slight increase only in amygdala area. These results suggest that the BNST appears to be the mostly involved neural circuit in response to explicit cues previously paired with footshock. Moreover, this study raise the possibility that increased CRF peptide in the BNST in response to re-exposure to the aversive condition may underlie, in part, the experience of conditioned fear-related anxiety behavior.

• 한국지열·수열에너지학회논문집
• /
• 제11권3호
• /
• pp.1-6
• /
• 2015

In this study, we analyzed t he design condition for appropriate design factor at geothermal system design documents. It is intended to provide the proper information of geothermal system design condition when construct new building, designer can use design conditions more efficiently. Therefore, it is possible to plan for domestic geothermal system, through utilization at design element, to provide as a good information that can predict the approximate underground condition. Thus, provided the basic design conditions that can predict the capacity of the geothermal system. It will be the first step to solve the problem.

• Structural Engineering and Mechanics
• /
• 제48권2호
• /
• pp.275-289
• /
• 2013

The cross sections of multi-span beams are sometimes suddenly increased at the interior support of continuous beams to resist high negative moment. An earlier study on elastic lateral torsional buckling of stepped beams was conducted to propose new design equations. This research aims to continue the earlier study by considering the effect of inelastic buckling of stepped beams subjected to pure bending and general loading condition. A three-dimensional finite element-program ABAQUS and a statistical program MINITAB were used in the development of new design equations. The inelastic lateral torsional buckling strengths of 36 and 27 models for singly and doubly stepped beams, respectively, were investigated. The general loading condition consists of 15 loading cases based on the number of inflection point within the unbraced length of the stepped beams. The combined effects of residual stresses and geometrical imperfection were also considered to evaluate the inelastic buckling strengths. The proposed equations in this study will definitely improve current design methods for the inelastic lateral-torsional buckling of stepped beams and will increase efficiency in building and bridge design.

• 품질경영학회지
• /
• 제48권3호
• /
• pp.463-479
• /
• 2020

Purpose: The purpose of this study is to evaluate the performance of heating equipments by implementing the extreme environment in which ships navigating the ice zone are exposed and to study and apply the experimental method to infer the optimized design for each factors. Methods: It is required to verify by analysis and experiment how the environment with low temperature and wind speed implemented through the test facility affects the heating walk-way and The optimum design of the heating walk-way in that extreme environment is derived using the Taguchi technique. Results: The results of this study are as follows; It was found the effect on the condition of each factor and derive optimized conditions that satisfy the performance condition of the heating walk-way in extreme use environment. Conclusion: Ships operating in Polar waters require reliable and durable facilities for all environments during sailing.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.25-30
• /
• 2019

In this paper, we have analyzed manufacturing problems of the scaffold with pores using FDM 3D printer and PLGA. We suggested the solutions using 3SC practical TRIZ. We selected the final solution used machine learning. We reduced number of experiments using most influential factor after analysis print factors. We printed the scaffold and measured pore size. We created the regression model using python tensorflow. The print condition data of measured pore size was used as training data. We predicted the pore size of printed condition using regression model. We printed the scaffold using the predicted the print condition data. We quantitatively compare the predicted scaffold pore size data and the measured scaffold pore size data. We got satisfactory result.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.267-272
• /
• 2009

The effects of design parameters for small scale hydro power(SSHP) plants due to rainfall condition have been studied. The model to predict hydrologic performance for SSHP plants is used in this study. The results from analysis for rainfall conditions based on KIER model show that the capacity and load factor of SSHP site had large difference between the period. Especially, the hydrologic performance of SSHP site due to rainfall condition of recent period varied in design flowrate sensitively. And also, the methodology represented in this study can be used to decide the primary design specifications of SSHP sites.