• Journal of Power System Engineering
• /
• v.12 no.5
• /
• pp.65-70
• /
• 2008

The purpose of this study is to verify availability of the acoustic emission in-situ monitoring method to the internal leak and operating conditions of the turbine major valves relating to safety for turbine operating and prevention of turbine trouble at nuclear power plants. In this study, acoustic emission tests are performed when the pressurized electro-hydraulic control oil flowed through turbine electro-hydraulic controller oil check valve and turbine power/trip fluid solenoid valve in the condition of actual turbine operating. The acoustic emission method was applied to the valves at the site, and the background noise was measured far the abnormal plant condition. To judge for the leak existence ell the object valves, voltage analysis and frequency analysis of acoustic signal emitted from infernal leak in the valve operating condition are performed. It was conformed that acoustic emission method could monitor for valve internal leak to high sensitivity.

• International Journal of Highway Engineering
• /
• v.19 no.3
• /
• pp.19-30
• /
• 2017

PURPOSES : This study proposes the road asset valuation approach using alternative depreciation methods. It has become necessary to have asset management system according to the adoption of accrual basis accounting for governmental financial reporting and the amendment of the road act. Therefore, it is very important to analyze the effect of depreciation methods on road asset value as a basic research for road asset management system. METHODS : The Ministry of Strategy and Finance (MOSF) has mainly performed road asset valuation based on Write down Replacement Cost and Straight Line depreciation method. This study suggests some appropriate asset valuation methods for road assets through case analysis using three depreciation methods: Consumption-based depreciation method, Condition-based depreciation method, and Straight Line depreciation method. A road asset valuation data of national highway route 1 (year 2014) is used to analyze the effect of three depreciation methods on the road asset value. Road assets include land and structures (pavement, bridge, and tunnel). This study mainly focuses on structures such as bridges and tunnels, because according to governmental accounting standards, land and road pavement assets do not depreciate. RESULTS : The main results of this study are as follows. Firstly, overall asset value of national highway route 1 was estimated at 6.97 trillion KRW when MOSF's method (straight-line depreciation method) is applied. Secondly, asset value was estimated at 4.85 trillion KRW on application of consumption-based depreciation method. Thirdly, asset value was estimated at 4.37 trillion KRW when condition-based depreciation method is applied. Therefore, either consumption-based or condition-based depreciation methods would be more appropriate than straight-line depreciation method if we can use the condition data of road assets including land that are available in real time. CONCLUSIONS : Since road assets such as pavements, bridges, and tunnels have various patterns of deterioration and condition monitoring period, it is necessary to consider a specific valuation method according to the condition of each road asset. Firstly, even though road pavements do not depreciate, asset valuation through condition-based depreciation method would be more appropriate when requirements for application of non-depreciation approach are not satisfied. Since bridge and tunnel facilities show various patterns of deterioration and condition monitoring period by type and condition level, consumption-based depreciation method based on deterioration model would be appropriate. Therefore, it is necessary to have a reasonable asset management system to apply condition-based depreciation method and a periodic condition investigation to manage road assets well.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.37-47
• /
• 2010

This research is aimed at comprehensively evaluating the condition of a road surface of a highway in satisfaction of its users. This research conducted an overall evaluation of a road surface condition by adding qualitative data, or a driver's satisfaction to the existing quantitative elements, whereas the existing research put its focus on a correlation analysis with quantitative factors and qualitative factors through a statistical method. As for an evaluation method, this research conducted an overall evaluation by using Grey System Theory which makes possible an integrated evaluation. The analyzed results make it possible to diagnose the current conditions of each section of object roads and to predict the potentially changeable conditions for the time to come. In addition, these analyzed results could hopefully be applied to the maintenance of freeways through diverse methods. It is hoped that the evaluation of a road surface condition of a highway in satisfaction of its user could be helpful to keeping up the satisfaction of a driver and passenger on the highway by more than a certain level. In addition, the analyzed data on the influence of data value observed by comprehensively evaluating a variety of elements could be used as a secondary means of the decision-making process in relation to road maintenance. On top of that, it could be used as a means of improving road maintenance system and offering the improved driving environment of the highway.

• Journal of Environmental Science International
• /
• v.12 no.4
• /
• pp.503-510
• /
• 2003

How to plan the energy system is one of the keys f3r constructing the Environment -Friendly City. for this reason, a great number of surveys for utilizing unused energy have conducted by a planner. In regard to unused energy, the heat from incineration plants classify as a unused energy having high-exergy-energy. From this point of view, It is studied about the plant systems providing heat to district heating & cooling(D.H.C) and producing electric power. It is divided four system models as system I (10K [kgf/cm$^2$) vapor as outlet of boiler, supply far 10K vapor and return to 60$^{\circ}C$ as supply condition of district heating), system II (30 K vapor as outlet of boiler, supply for 5t vapor and return to 60f as supply condition of district heating), system 111 (30 K vapor as outlet of boiler, supply for 85$^{\circ}C$ hot water and return to 60$^{\circ}C$ as supply condition of district heating), system IV (30 K vapor as outlet of boiler, supply for 47$^{\circ}C$ hot water and return to 40t as supply condition of district heating). The results from the upper condition of four system, System II got a proper on economical benefits and system IV calculated as benefiting on energy saving effects, and suggest indifference curve as the total evaluation method of both economical benefits and energy saving.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.192-199
• /
• 2002

Largely, there are three kinds of the design criteria of piping system in petrochemical plant. The first is on the pipe thickness in accordance with the design pressure of piping system. The second is on the static state evaluation by thermal growth and the other is on the dynamic evaluation by piping vibration. According to the ASME B31.3 code, the internal pressure design thickness fur straight pipe shall be calculated as a code formula. And the static design by thermal displacement is defined 7000 cycles of fatigue life in operating the piping system with a design condition. However, the dynamic design evaluation in comparative with small displacements of high frequencies to the static condition has not established clearly the method, yet. So, this study purposes to present the trial of a proposal of dynamic design criterion on the basis of static design method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.11
• /
• pp.1627-1637
• /
• 2002

The objective of this study is to analyze the images of basic bodice apparel displayed on the PC monitor connected to digital camera, and to suggest a more efficient alternative method that enables the expert judge to evaluate the subject both traditional method and displayed images on the computer. Appearance evaluation has traditionally been assessed using subjective method dependent upon expertjudges' senses with the naked eye after direct observation of a living model. This research faces the new challenge focusing on the sensory evaluation of appearance for basic apparel patterns, which can overcome the space and time limitations of the traditional feet methods. A total fifteen basic bodice garment (3 types of $pattern\;{\times}\;5$ subject) were constructed with same fabrics. The appearance evaluation items consist of lg questions of upper torso. The image takes font, back and side view of the dressed subject with three different situations. Data was analyzed using percentiles, standard deviation T-test and ANOVA. Taken together, the present result of appearance evaluation through digital camera image shows that there is a significant difference ($p{\leq}.001$) in the response to the placement of the neckline, the waist & shoulder dart, the general ease of the bust & waist area, the side seam, the perpendicular of the waist hem and general acceptability between the above three different situations; the image in the condition of greenish yellow background with front light showed the highest score through all questions. These results depend on the kind of background colors with the light.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.5
• /
• pp.285-290
• /
• 2006

The evaluation of clamping condition has been regarded as the main issue in the safety-maintenance of the clamped high-tension bolts. For this, this paper proposes a method to estimate the axial stress by measuring the TOF (Time-Of-Flight) of ultrasonic wave, which is based on the acoustoelasticity or the dependency of sound speed on the stress. In this method, however, the variation of sound speed within the range of stress induced under the field condition is very small, and thus the accuracy of the TOF measurement is important. We adopted the phase detection method using tone-burst ultrasonic wave to measure the precise TOF. In order to verify the usefulness of the proposed method experiments are carried out and the results were compared with the stress measured by the strain gage. The results show good agreement with each other, and from these we can conclude that the proposed method is highly useful fnr the evaluation of clamping condition in the clamped high-tension bolts.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.181-183
• /
• 2013

In case of hydrological observation system, Life time of facilities is different with operating environment and frequency of use. So, the durable year of the facilities is only considered to replace the facilities at present. Thus, system management is needed economical assesment based on condition evaluation through performance analysis of facilities. This research makes a proposal for scientific condition evaluation table through physical assessment, performance analysis assessment, durable years assessment about satellite communication facilities being used in K-water. Consequentially, reasonable replacement plan is established for satellite communication facilities.

• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.1-5
• /
• 2013

In order to evaluate fatigue endurance for an MTB(mountain bike) frame, FEM(finite element method) analysis was performed. For evaluating the fatigue endurance of the MTB frame, the S-N data for Al-6061 fillet weldment were compared with the stress analysis results through FEM analysis of the frame. Three loading condition, pedalling, horizontal and vertical loading conditions were considered for fatigue endurance evaluation. Horizontal loading(+1200 N) condition was found to be the most severe to the frame. The maximum von Mises stress of the frame under horizontal loading(+1200 N) condition was determined 294 MPa through FEM analysis of the frame. Conclusively, on the basis of fatigue strength of 200 MPa at the number of cycles of 50,000, the MTB frame has an improper safety factor of approximately 0.25, suggesting that this frame needs reinforcement.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.258-264
• /
• 2000

This study is to establish test method and evaluation technology of drive system appropriate to high speed train. The transmission system of high speed train serve in the severe condition compared with those of other trains, namely, they have to transmit high power to run with high speed and they have to make maximum use of the limited space. This paper reports the reviews and results for the test and evaluation method of reduction gearbox for high speed train and discusses various test items and methods about assembly and parts of gearbox transmission.