• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.209-215
• /
• 2005

The dimensions and forms of precise machined parts are different to kinds of machine. It will be variant according to machine wear, tool form, cutting method and cutting condition at the same machine. At that time, the most important things are controlled and measured by appropriate measuring instruments. This paper aims to contribute to improving measurement accuracy through evaluation and consideration about various roundness in the machining company.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1132-1140
• /
• 2009

Recently soil improvement methods are using in many ways such as costal and soft ground of inland. Among them, sand compaction pile be widely used because of quiet few advantages. There are two ways for quality evaluation method of sand compaction pile. Especially standard penetration test is used the most general method. However, Current method have problems in that it is not consider the condition of construction site. Therefore this study is propose new quality evaluation method. Relation of N-$\Phi$ is always not fixed but changing by condition of construction site. By through the Laboratory test we can know relationship between relative density and internal friction. Also this study propose revision for effective stress. From these study, we can acquire more accurate and reasonable result than current method.

• 한국가스학회지
• /
• 제21권5호
• /
• pp.64-69
• /
• 2017

한국은 세계 2위의 LNG 수입국이고 2017년 기준 약 70기의 LNG 저장탱크가 상업운전 중에 있다. LNG산업의 핵심설비인 LNG 저장탱크는 1986년 상업운전 이후 설계보증 연한인 30년이 경과 되면서 도시가스사업법 개정을 통해 2014년부터 정밀안전진단을 수행하고 있다. 정밀안전진단 시 LNG 저장탱크의 외조 콘크리트에 대해서 상태평가를 할 수 있는 기준이 부재한 상태이다. LNG 저장탱크의 구조적 특성과 기존 토목구조물 상태평가 기준 분석을 통해 저장탱크의 대표부재에 대한 상태평가기준을 개발하였다. 개발된 객관적 상태평가기준은 LNG 저장탱크의 안전성 및 신뢰성을 향상시키고 보수기준을 제시할 수 있다.

• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.58-64
• /
• 2009

In this paper, an inspection mechanism based on laser scattering has been developed for the surface evaluation of infrared cut-off filters, and optimum conditions of laser scattering are determined using the design of experiment. First of all, attributes and influence factors of laser scattering are investigated and then a laser scattering inspection mechanism is newly designed based on analyses of laser scattering parameters. Also, Taguchi method, one of experimental designs, is used for the optimum condition selection of laser scattering parameters and the optimum condition is determined in order to maximize the detection capability of surface defects. Experiments show that the proposed method is useful in a consistent and effective defect detection and can be applied to surface evaluation processes in manufacturing.

• 농촌계획
• /
• 제4권2호
• /
• pp.70-78
• /
• 1998

The objective of this study was to enforce systematic evaluation on the present condition and ecosystem of coastal wetland to use frame of environmental indicators, For this, the indicators for evaluation of coastal wetland were established and were applied to the present condition. Then, the application possibility of this evaluation indicators and management method by group of coastal method are presented. These results present the following consideration in case that the ideal management method on the conservation and development of coastal wetlands was proposed. In case of Kang-hwa island which had the good natural environment, the mlnimum development with maintenance of the present state must be driven. In case of Tae-an which had the good natural environment and development potential, the development that was in harmony with the nature must to be driven. In case of Seo-chon which was previously developed region, the various development programs which had the minimum effects on the natural, living and socio $.$ economic environment must to be provided.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.275-279
• /
• 2001

There are two kinds of the design criteria of piping system in petrochemical plant design. The first is on static state evaluation by thermal growth and the other is on dynamic evaluation by piping vibration. In the static design evaluation, the ASME B31.3 code defines 7000 cycles of fatigue life in operating the piping system with design condition. However, the dynamic design evaluation in comparative with small displacements of high frequencies to static condition has not established clearly the method, yet. So, this study purposes to present the trial of a proposal of dynamic design criterion on the basis of static design method.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.453-458
• /
• 2007

The importance of the evaluation and verification of small-size cogeneration system has been emphasized because there is no KS-code related to the small-size cogeneration system. The evaluation method of small-size engine cogeneration system was investigated by the reference of Japan evaluation code, JIS B-8122 and international standard organization, ISO-8528. Evaluation method was introduced such as start-test, rapid-load-up and rapid-load-down, etc. The evaluation method was applied to the 300kW small-size gas engine cogeneration system newly developed. The precise and strict evaluation and verification of the system will help the developing cogeneration system to optimum condition. It will also be a base document of KS-Code.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.427-438
• /
• 2015

The present work proposes a new image analysis method for the evaluation of the multi-walled carbon nanotube (MWNT) distribution in a cement matrix. In this method, white cement was used instead of ordinary Portland cement with MWNT in an effort to differentiate MWNT from the cement matrix. In addition, MWNT-embedded cement composites were fabricated under different flows of fresh composite mixtures, incorporating a constant MWNT content (0.6 wt%) to verify correlation between the MWNT distribution and flow. The image analysis demonstrated that the MWNT distribution was significantly enhanced in the composites fabricated under a low flow condition, and DC conductivity results revealed the dramatic increase in the conductivity of the composites fabricated under the same condition, which supported the image analysis results. The composites were also prepared under the low flow condition (114 mm < flow < 126 mm), incorporating various MWNT contents. The image analysis of the composites revealed an increase in the planar occupation ratio of MWNT, and DC conductivity results exhibited dramatic increase in the conductivity (percolation phenomena) as the MWNT content increased. The image analysis and DC conductivity results indicated that fabrication of the composites under the low flow condition was an effective way to enhance the MWNT distribution.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권3호
• /
• pp.92-99
• /
• 2021

건축물의 정밀안전점검 및 정밀안전진단시에는 안전등급 판정을 위해 상태평가를 실시하여야 한다. 2004년부터 정량적인 상태평가를 위해 퍼지이론을 이용한 평가방법을 도입하였고, 퍼지이론을 이용한 철근콘크리트 부재의 평가항목 간의 관계와 중요도를 도출하였다. 일반적으로 퍼지이론은 상관관계가 명확하지 않고, 모호한 표현을 처리할 때 사용되는 방법으로, 개발 당시에는 점검 및 진단 결과자료들이 부족한 상황에서 대안으로 퍼지이론을 적용하여 개발한 것으로 보인다. 따라서 실제 점검 및 진단 결과자료를 이용하여 퍼지이론을 바탕으로 도출된 평가항목 간의 관계와 중요도에 대한 검증이 필요하다. 본 연구에서는 정밀안전점검 19건과 정밀안전진단 9건의 결과와 성능점수 함수식을 이용하여 평가항목간의 상관관계를 도출하였으며, 이를 이용하여 부재의 합리적인 내구성 점수 산정식을 제시하였다.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.59-67
• /
• 2006

Recently, application of friction welded SUH35/SUH3 is increasing in the manufacturing process of automotive engine valves For securing its reliability and a reasonable strength evaluation method, it is necessary to assess stress singularity under the residual stress condition on the friction welded interface between dissimilar materials. In this paper, strength evaluation method of friction welded materials was investigated by boundary element method and static tensile testing. An advanced method of quantitative strength evaluation for SUH35/SUH3 friction welded material is to be suggested by establishing fracture criterion by using stress singularity factors.