• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.4
• /
• pp.533-539
• /
• 2012

PURPOSE: The purpose of this study was to investigate the effect of pelvic floor muscle contraction with image feedback on Abdominal muscle thickness. METHODS: Twenty three adults participated in this study. Abdominal muscle thickness was measured by ultrasound in three condition(rest, pelvic floor muscle contraction, pelvic floor muscle contraction with image feedback). Subjects was contraction pelvic floor muscle by general method. And ultrasound(convex probe, 3.5MHz) was used to image feedback for selective pelvic floor muscle contraction. One-way ANOVA was used to compare abdominal muscle thickness in three condition. RESULTS: There was no significant difference in external oblique(p=.514) and internal oblique muscle(p=.250) thickness by three condition. There was significant difference in transverse abdominis thickness by three condition (Transverse abdominis thickness was highest while Pelvic floor muscle contraction than pelvic floor muscle contraction with image feedback and rest.)(p=.000). CONCLUSION: This study shows that pelvic floor muscle contraction with image feedback increase the thickness of transverse abdominis lesser than general pelvic floor muscle contraction.

• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.1-7
• /
• 2004

Because acid dyes and reactive dyes require acidic condition for adsorption and alkaline condition for fixation respectively, it is difficult to dye nylon/cotton blends in one-bath one-step dyeing method. In this paper we tried to find out the suitable dye and dyeing condition for one-bath one-step dyeing of nylon/cotton blends. MNT type reactive dyes showed higher exhaustion on cotton as compared with MCT type dyes at neutral pH, which means that the MNT type reactive dyes are preferable for one-bath one-step dyeing method. The optimum condition for one-bath one-step dyeing of nylon/cotton blends was found to be pH 7. Wash fastness of fabrics dyed with half-milling type acid dyes was superior to that of fabrics dyed with levelling type acid dyes, when MNT type reactive dyes were used together.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.7
• /
• pp.637-642
• /
• 2011

The DMT freight is judged that economic performance is good because can increase cargoes than existing freight. However, the existing freight cars, each with a different balance to the body structure is bogie because the vibrations may occur. Thus, by minimizing vibration over the existing freight securing the safety of the driving if you will not have major problems in cargoes. In this study, multi-body dynamic analysis tool, VI-Rail using the actually Gyeongbu Railroad line and an empty, full freight condition include curve radius, track irregularity, The DMT freight of the derailed wagons were assessed for safety analysis. Full and empty freight conditions for parity in the Gyeongbu Railroad line(Dongdaegoo${\leftrightarrow}$Kyungsan) derailment safety analysis, such as derailment coefficient and the wheel unloaded, echoing the curve and the orbit is affected by the irregularity was found. Full freight condition than the empty conditions showed a significant derailment safety. Overall, the limits of derailment coefficient(Q/P = 0.8) and wheel unload decrement limits(${\triangle}P/P$ = 0.6) is less safe with me confirmed that the derailment safety.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.1
• /
• pp.91-99
• /
• 2019

PURPOSE: This study was conducted to evaluate the activity of trunk muscles according to width of the foot and posture of the arm during sit to stand (STS). METHODS: Thirty subjects were recruited and examined for variation in muscle activity of the erector spine, gluteus maximus, gluteus medius and external oblique during different STS conditions; namely, the cross arm basic sit to stand (CBSTS), overhead basic sit to stand (OBSTS), cross arm wide sit to stand (CWSTS), and overhead wide sit to stand (OWSTS). Repeated measures ANOVA (Analysis of Variance) was used for analysis. RESULTS: Erector spinae muscle activity showed a significant increase in the OBSTS condition (p<.05) and external oblique muscle activity showed a significant increase in the OWSTS condition ((p<.05). There was no significant difference in the activity of the gluteus maximus and gluteus medius under any conditions (p>.05). CONCLUSION: During evaluation of the performance of the STS, the CWSTS condition will be useful to decrease the muscle activity of the erector spinae and the OWSTS condition will be useful to increase the muscle activity of the external oblique. The results of this study can be used as an index to find a suitable exercise method for subjects who have back pain or to strengthen the abdomen.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.202-214
• /
• 2015

Stimuli-responsive biomaterials that alter their function through sensing local molecular cues may enable technological advances in the fields of drug delivery, gene delivery, actuators, biosensors, and tissue engineering. In this research, pH-responsive hydrogel which is comprised of dimethylaminoethyl methacylate (DMAEMA) and 2-hydroxyethyl methacrylate (HEMA) was synthesized for the effective delivery of doxorubicin (Dox) to breast cancer cells. Cancer and tumor tissues show a lower extracellular pH than normal tissues. DMAEMA/HEMA hydrogels showed significant sensitivity by small pH changes and each formulation of hydrogels was examined by scanning electron microscopy, mechanical test, equilibrium mass swelling, controlled Dox release, and cytotoxicity. High swelling ratios and Dox release were obtained at low pH buffer condition, low cross-linker concentration, and high content of DMAEMA. Dox release was accelerated to 67.3% at pH 5.5 for 6-h incubation at $37^{\circ}C$, while it was limited to 13.8% at pH7.4 at the same time and temperature. Cell toxicity results to breast cancer cells indicate that pH-responsive DMAEMA/HEMA hydrogels may be used as an efficient matrix for anti-cancer drug delivery with various transporting manners. Also, pH-responsive DMAEMA/HEMA hydrogels may be useful in therapeutic treatment which is required a triggered release at low pH range such as gene delivery, ischemia, and diabetic ketoacidosis.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.4
• /
• pp.263-268
• /
• 1994

Field microplot(D 20cm, L 85cm) experiment filled with Bonryang sandy loam soil(Typic Udifluvents) was conducted to obtain quantitative information on the change of soil pH under different soil moisture regime and ladino clover cultivation, and the movement of applied nutrient under the rainfed bare soil condition. Slaked lime increased soil pH of the applied layer. $NH_4-N$ evolved from urea hydrolysis was more effective in raising the subsoil pH rather than the exchangeable Mg and Ca. Under the different soil miosture condition downward movement of Cl and $NO_3-N$ lowered subsoil pH during the middle of ladino clover growth. Leaching of CI and $NO_3-N$ down to the out of the soil microplot and increasing movement of Ca and Mg into the subsoil produced. a slight increase of subsoil pH during the late crop growth. The mean downward movement of applied nutrient 5.5 months after field installation of microplot in the bare soil under rainfed condition(1207mm) was in the order : Cl= more than 80.0>Inorganic nitrogen= 75.8>K= 67.3>Mg=62.7>Ca=18.1>P=2.3cm respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.217-225
• /
• 2019

The aim of this study was determine to effect of shaft length and physical condition on golf driving performance(head speed, distance and direction). A range of drivers with length between 44 inch, 45 inch and 46 inch limit imposed by R&A rules limited were assembled and evaluated. Club head speed and drive distance and accuracy were determined three category 27 PGA pro golfer (handicaps 0, and height $170cm{\geq}171-175{\geq}175-180cm$) who golf performance. As a results follow : Head speed was significantly difference with 44, 45 between 46inch(p<.01). Distance was significantly difference with 44 between 46inch(p<.05). And direction was significantly difference with 44, 45inch between 46inch(p<.05). Head speed according to height was general similarity among shaft length in 170cm, 171-175cm. Distance were general similarity among shaft length in 170cm, and significantly difference with 44inch between 46inch in 171-175cm(p<.01), and significantly difference with 45inch between 46inch in 176-180cm(p<.05). Direction were significantly difference with 44inch between 46inch in 170cm(p<.05), but do not significantly difference with 44inch between 46inch in 176-180cm, 176-180cm. These results show that shaft length and height can affect head speed, distance and direction.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.410-415
• /
• 2001

An analytical and numerical examination of second-order fractional-step methods and boundary condition for the incompressible Navier-Stokes equations is presented. In this study, the compatibility condition for pressure Poisson equation and its boundary conditions, stability, and numerical accuracy of canonical fractional-step methods has been investigated. It has been found that satisfaction of compatibility condition depends on tentative velocity and pressure boundary condition, and that the compatible boundary conditions for type D method and approximately compatible boundary conditions for type P method are proper for divergence-free velocity for type D and approximately divergence-free for type P method. Instability of canonical fractional-step methods is induced by approximation of implicit viscous term with explicit terms, and the stability criteria have been founded with simple model problems and numerical experiments of cavity flow and Taylor vortex flow. The numerical accuracy of canonical fractional-step methods with its consistent boundary conditions shows second-order accuracy except $D_{MM}$ condition, which make approximately first-order accuracy due to weak coupling of boundary conditions.

• Physical Therapy Korea
• /
• v.13 no.4
• /
• pp.30-38
• /
• 2006

This study was to investigate the influence of cooling on muscle force and viscoelastic properties of tendon structures in themedial gastrocnemius (MG) muscle. The subject was instructed to gradually increase force (10% MVC step) from a relaxed state to MVC within 3 s. At this time, it was measured by an ultrasonographic probe was attached and that an electrode was attached to monitor EMG. The F values at 50 100% of MVC were significantly greater under the cold condition than under the non-cold condition (p<.05). The ${\Delta}F/{\Delta}L$ values at 80~100% of MVC were significantly higher under the cold condition than under the non-cold condition (p<.05). The elongation under the non-cold condition had a tendency to be greater than that under the cold condition. The results suggest that cooling results in an increase in the stiffness of tendon structures with a reduction of muscle force and elongation.

• Geomechanics and Engineering
• /
• v.18 no.4
• /
• pp.363-371
• /
• 2019

In this study, the load carrying behavior of piled rafts installed in inclined bearing rock layer was investigated for rock-mounted and -socketed conditions. It was found that settlements induced for an inclined bearing rock layer are larger than for a horizontal layer condition. The load capacity of piled rafts for the rock-mounted condition decreased as rock-layer inclination angle (${\theta}$) increased, while vice versa for the rock-socketed condition. The load capacities of raft and piles both decreased with increasing ${\theta}$ for the rock-mounted condition. When bearing rock layer was inclined, loads carried by uphill-side piles were greater than those by downhill-side piles. The values of differential settlements of rock-mounted and -socketed conditions were not significantly different whereas slightly higher for the rock-socketed condition. The values of load sharing ratio (${\alpha}_p$) and its variation with settlement were not markedly changed by the inclination of bedrock. It was shown that ${\alpha}_p$ for piled rafts installed in rock layer was not affected by ${\theta}$ whereas actual loads carried by raft and piles may vary depending on the pile installation and rock-layer inclination conditions.