• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1301-1304
• /
• 2010

The Indium modified mesoporous zeolite AlMCM-41 were synthesized by hydrothermal method and characterized by powder X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) techniques. The Knoevenagel condensation of aldehyde with malononitrile or ethyl cyanoacetate was carried out at reflux condition in ethanol by using heterogeneous In/AlMCM-41 catalyst. This method is fast, efficient, easy work-up and eco-friendly to afford the corresponding Knoevenagel adducts. The catalyst was recovered and reused for several cycles with consistent activity.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.2
• /
• pp.159-165
• /
• 2004

Fuel cell makes electricity through chemical reaction. Bipolar-plate distribute hydrogen, oxidation using channel geometry condensation of water vapor inside channels of bipolar-plates lowers efficiency of fuel cell. Usually high pressured gas supply is used to solve the water condensation problem with serpentine type channel geometry. In this study, a new channel geometry shows feasible to minimize lowering efficiency due to water condensation through numerical and experimental analysis.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1196-1197
• /
• 2006

FePt binary-alloy nanopowder has been successfully synthesized by chemical vapor condensation process with two metal organic precursors, i.e., iron pentacarbonyl and platinum acetylacetonate. Average particle size of the powder was less than 50 nm with very narrow size distribution, revealing high dispersion capability. Characteristics of the powder could be controlled by changing process parameters such as reaction temperature, chamber pressure, as well as gas flow rate. Magnetic properties of the synthesized FePt nanopowder were investigated and analyzed in terms of the powder characteristics.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.12
• /
• pp.1394-1398
• /
• 1999

The structures of modified Ti$(OPr^i)_4$ with chelating ligands (L) such as ethylacetoacetate (Etac), acetylacetone (Acac) and methylacetoacetate (Mtac) were identified by using IR, ¹H NMR and $^13C$ NMR spectroscopies, and the octahedral structure was confirmed after modification. The pre-edge peaks of XANES spectra of modified metal alkoxides also denoted the mixture of five-fold and six-fold structures. The EXAFS fitting results showed the local structure around Ti atom after alkoxide modification. The hydrolysis-condensation rates of modified Ti alkoxide with organic additives were investigated by ¹H NMR spectroscopy. The Ti$(OPr^i)_4$ modified by Acac was less reactive toward hydrolysis-condensation reaction than those modified by the other alkoxides, which can be attributed to the stable ligand structure between Ti$(OPr^i)_4$ and Acac. The small particle size of modified Ti$(OPr^i)_4$ sol was obtained when Acac was employed.

• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.416-420
• /
• 2012

A convenient procedure for the synthesis of fatty acid diesters was studied. Long chain diesters have been used as biolubricant and transformer oils. The series of octyl, dodecyl, hexadecyl, octadecyl, and octadec-9-enyl glycidyl ether were used to synthesize those diesters. Alkyl glycidyl ethers were reacted with fatty acid such as oleic acid and octanoic acid, and octanoic acid. The one-step / two-step reactions were compared during the condensation reaction. The products were confirmed by $^{1}H-NMR$, FT-IR, and HR/MS spectra. The yield of the product 1-O-acyl-2-O, 3-O-dioctadec-9-enoylglycerol was 55~60%.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.430-435
• /
• 2011

Coal fly ash of thermal power plants converted into mesoporous materials MCM-41. The synthesized material was characterized by XRD, FT-IR, SEM, and EDS techniques. The catalytic activity of prepared material was studied for the synthesis of 5-arylindene malononitriles via Knoevenagel condensation of aromatic aldehydes and malonontrile is described. The features of present method are easy handling, stability, reusability, and eco-friendliness of catalyst, high yields, short reaction time, simple experimental and work up procedure.

• Journal of the Korean Chemical Society
• /
• v.55 no.5
• /
• pp.830-834
• /
• 2011

This paper is on the industrial synthesis process of anti-oxidant RD ((2,2,4-trimethyl-1,2-dihydroquinoline polymer $(C_{12}H_{15}N)_n$. n=2-4)).The content of dimer, trimer and tetramer of RD as the inspection targets, using the orthogonal design method - take the ratios of keto-amine, the reaction time, the reaction temperatures and the ratios of catalyst acid-amine as inspect factors - to optimized the reaction condition. The results indicate that the best ratio of keto-amine is 2:1, the time of salification and condensation is 3 hours and 7.5 hours. The range of temperature of salification and condensation is $135^{\circ}C$ and $120-125^{\circ}C$, and that the best ratio of acid-amine is 0.2: 1 (the proportion is the concentration ratio for mole). Under the optimization conditions, the yield of RD was stabilized and content of RD more than 45%.

• Journal of the Korean Chemical Society
• /
• v.10 no.4
• /
• pp.149-152
• /
• 1966

An insecticide was obtained by condensation of chloral hydrate with p-chloroanisole. The structure of the insecticide was found to be 2,2-bis(2-methoxy-5-chlorophenyl)1,1,1-trichloroethane(M.C.T.). The best conditions for this condensation reaction were as follows: 1) The sulfuric acid concentration: 93% 2) The mole ratio of sulfuric acid to p-chloroanisole: 8 3) The mole ratio of chloral hydrate to p-chloroanisole: 0.7 4) The reaction time and reaction temperature: 12 hrs and 25-30$^{\circ}C$ The insecticidal effects of M.C.T against the Citrus Red Mite and Chrysanthemum Aphid were five times as strong as D.D.T.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.35-42
• /
• 2019

Risk assessment and analysis for a medium-to-small sized chemical plant that manufactures a polyester resin by the process of batch-type condensation reaction was conducted using K-PSR technique which is one of the risk assessment methods used to implement the Process Safety Management System (PSM). K-PSR is a risk assessment technique developed by KOSHA to compensate for difficulties caused by the lack of infrastructure of medium-to-small sized chemical plants in the re-evaluation. To apply the K-PSR technique, the entire process of a selected chemical palnt was classified in two review sections, i.e., the condensation reaction process and the dilution/filtration process, and the potential risks of the process about these review sections were identified and classified based on the four guide-words (release, fire.explosion, process trouble, and injury). As the results of the research, refer to recommend of risk rating has been confirmed that non-destructive testing of old facilities and the preparation of LOTO procedures for the electrical equipments are necessary as specific measures to prevent the risk of release and fire.explosion. It was also shown that pressure gauges and thermometers should be installed on the hot-oil supply piping to minimize the process trouble, and exhausting hood should be installed to prevent potential injury.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.68-72
• /
• 2005

A low-molecular-weight poly(lactic acid) was synthesized through the condensation reaction of L-lactic acid. The effects that the catalyst and temperature have on the reaction rate were studied to determine the optimum reaction conditions. The reaction kinetics increased with temperature up to $210^{\circ}C$, but no further increase was observed above this temperature. Among a few selective catalysts, sulfuric acid was the most effective because it maximized the polymerization reaction rate. Reduction of the pressure was another important factor that enhanced this reactions kinetics.