• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.295-322
• /
• 2013

Steel fiber reinforced self-compacting concrete (SFRSCC) is a relatively new composite material which congregates the benefits of self-compacting concrete (SCC) technology with the profits derived from the fiber addition to a brittle cementitious matrix. Steel fibers improve many of the properties of SCC elements including tensile strength, toughness, energy absorption capacity and fracture toughness. Modification in the mix design of SCC may have a significant influence on the SFRSCC mechanical properties. Therefore, it is vital to investigate whether all of the assumed hypotheses for steel fiber reinforced concrete (SFRC) are also valid for SFRSCC structures. Although available research regarding the influence of steel fibers on the properties of SFRSCC is limited, this paper investigates material's mechanical properties. The present study includes: a) evaluation and comparison of the current analytical models used for estimating the mechanical properties of SFRSCC and SFRC, b) proposing new relationships for SFRSCC mixtures mechanical properties. The investigated mechanical properties are based on the available experimental results and include: compressive strength, modulus of elasticity, strain at peak compressive strength, tensile strength, and compressive and tensile stress-strain curves.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.192-197
• /
• 1996

An experimental study was performed to examine the feasibility of using silicic wastes as construction materials for civil structures, and investigate its utility as a replacement for the favored nature resource to prevent the economic loss. In order to achieve this objective, mechnical properties of concrete containing silicic wastes is tested by investigating the strength development through parameters of water-binder ratios replacement 10 percent ratio with respect to curting conditions. The effect of stringth development is investigated for curing conditions when silicic wastes of 10 percent of cement-binder ratios is containde. Comparision on compressive strength of normal concrete and concrete containing silicic wastes at 28 day is conducted. The concrete with silicic wastes have larger compressive strength than of normal concrete by about 20 percent, when cured at 80 degree. The wastes concrete using silica sand shows increased strength, fracture toughness, elastic modulus and strain than the normal concrete, although the silicic wastes concrete could be able to satisfy the generally required strength for conventional concrete structures.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.11-21
• /
• 2013

PURPOSES: As pavement generally provides service shorter than an expected life cycle, maintenance cost increases gradually. In order to help extending the service life and reduce maintenance cost, a new multi-functional composite pavement system is being developed in Korea. METHODS: This study is a part to develop the multi-functional composite pavement and is to investigate the mechanical performances of fiber-reinforced lean concrete for pavement subbase. The inherent problem of fiber reinforced concrete is dispersion of fibers in concrete mix. This study additionally evaluated fiber dispersion characteristics with respect to different fiber types. RESULTS: From the test results, the compressive strengths of the concretes satisfied the required limit of 5MPa at 7days. The standard deviation of the measured number of fibers were lower in the order of nylon, steel fiber and polypropylene. CONCLUSIONS: Reject ash was shown to be satisfactory as a replacement material to Portland cement in lean concrete base. The fiber volume fraction is suggested to be 0.4% even though the fracture toughness did not vary significantly with respect to fiber types. However, fracture energy absorbed up to complete failure increased with the increased fiber volume fraction increment.

• Computers and Concrete
• /
• 제24권1호
• /
• pp.63-71
• /
• 2019

Thermal energy from high temperatures can cause concrete damage, including mechanical and chemical degradation. In view of this, the residual mechanical properties of high-strength fiber reinforced concrete with a design strength of 75 MPa exposed to $400-800^{\circ}C$ were investigated in this study. The test results show that the average residual compressive strength of high-strength fiber reinforced concrete after being exposed to $400-800^{\circ}C$ was 88%, 69%, and 23% of roomtemperature strength, respectively. In addition, the benefit of steel fibers on the residual compressive strength of concrete was limited, but polypropylene fibers can help to maintain the residual compressive strength and flexural strength of concrete after exposure to $400-600^{\circ}C$. Further, the load-deflection curve of specimen containing steel fibers exposed to $400-800^{\circ}C$ had a better fracture toughness.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.308-314
• /
• 1997

Shrinkage and creep are the fundamental properties of concrete. These long term deformations can be seen as bothersome(increased deflection) or can be seen as reduction of compressive stress of prestressed concrete. Steel fibers advance the mechanical properties of concrete:tensile strength, ductility, flexural strength, fracture toughness, and post-cracking resistance, etc...Silica fume is pozzolanic material which combines with hydrated lime to generate silicate materials which increase the compressive strength and reduce somewhat the creep of concrete. This paper is the result of the long-term deformation by silica fume and steel fibers with varying percentages.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.230-240
• /
• 1997

본 연구에서는 폴리프로필렌 섬유보강 콘크리트의 파괴특성을 알아보기 위해 Monofilament 섬유와 Fibrillated 섬유의 두 종류 폴리프로필렌 섬유를 선택하여 10$\times$10$\times$50 cm 보 시편을 만들었는데, 이때 사용된 두 종류의 섬유 길이는 19 mm이고, 섬유 혼입량은 0%, 1%, 2%, 3%로 하였으며, 초기균열 깊이의 영향을 알아보기 위해 초기 균열길이를 각 섬유 혼입량에 따라 1.5cm, 3.0cm, 4.5cm로 하여 실험을 수행하였다. 또한, 본 연구에서는 폴리프로필렌 섬유보강 콘크리트의 파괴특성을 규명하기 위해 보 시편에 대한 4 점 하중 휨시험을 통해 하중-하중점 변위 곡선을 각 시편에 대해 측정하였고, 이때 COD 게이지를 이용하여 하중-CMOD 곡선도 측정할 수 있었다. 이러한 실험결과를 통해, 섬유혼입량과 초기 균열 깊이에 따른 압축강도, 휨강도 및 휨인성, 응력확대계수, 파괴에너지 등이 규명되었다. 이러한 결과에 대한 분석으로부터 Fibrillated 폴리프로필렌 섬유가 Monofilament 섬유보다 연성 효과가 큰 것을 알 수 있었으며, 특히 하중-CMOD 곡선으로부터 계산되는 파괴에너지인 Jc가 믿을만한 파괴특성 인자임을 알 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권1호
• /
• pp.78-85
• /
• 2023

이 연구는 하이브리드 섬유시트를 이용하여 보강된 철근콘크리트 기둥의 구조성능평가에 관한 연구이다. 내진보강 공법은 보강이 필요한 노후 콘크리트 구조물에 아라미드섬유와 PET섬유를 일축으로 배열하여 직조한 하이브리드 섬유시트를 에폭시로 함침하고, 이를 구조물에 부착시켜 보강 구조물의 내하력을 증진시키는데 그 목적이 있다. 특히, 강재보다 가벼운 섬유를 사용함으로써 얻어지는 재료의 경량화뿐만 아니라, 사용된 섬유 중 저강도 고인성의 섬유요소가 고강도 저인성 섬유요소의 취성적 파괴를 지연시켜 기존의 섬유보강 공법과 비교해 안전성 측면에서 우수하다. 연구는 구조실험과 그 결과에 대한 구조성능평가로 진행되었다. 총 4개의 실험체는 하이브리드 보강방법 및 파괴모드를 주요변수로 계획하였으며, 실험체 크기 및 가력조건 등은 기존연구에서 수행한 실험결과와 비교가 가능하도록 계획하였다. 실험체의 구조성능은 에너지소산능력, 연성평가등을 사용하여 평가하였다. 다음과 같은 분석을 통하여 하이브리드 섬유시트의 보강하였을 때 우수한 성능 결과를 보일 수 있다는 결론은 얻었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.82-83
• /
• 2015

Recently, the research on steel fiber reinforced concrete has been actively conducted to compensate the defect of brittle fracture of concrete and to enhance toughness. Therefore, the effect of the mixture rate of straight steel fiber on flexural behavior of high strength steel fiber reinforced concrete was evaluated in this research. As a result, when 2% of steel fiber was mixed with concrete volume ratio, it showed the best flexural capacity.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.365-375
• /
• 2017

An experimental evaluation of crack propagation and post-cracking behavior in steel fiber reinforced concrete (SFRC) beams, using full-field displacements obtained from the digital image correlation technique is presented. Surface displacements and strains during the fracture test of notched SFRC beams with volume fractions ($V_f$) of steel fibers equal to 0.5 and 0.75% are analyzed. An analysis procedure for determining the crack opening width over the depth of the beam during crack propagation in the flexure test is presented. The crack opening width is established as a function of the crack tip opening displacement and the residual flexural strength of SFRC beams. The softening in the post-peak load response is associated with the rapid surface crack propagation for small increases in crack tip opening displacement. The load recovery in the flexural response of SFRC is associated with a hinge-type behavior in the beam. For the stress gradient produced by flexure, the hinge is established before load recovery is initiated. The resistance provided by the fibers to the opening of the hinge produces the load recovery in the flexural response.

• 콘크리트학회지
• /
• 제6권5호
• /
• pp.158-170
• /
• 1994

본 연구는 산업부산물의 플라이애쉬 및 실리카흄을 이용한 고성능$\cdot$고품질의 건재의 제조 및 응용을 위하여 보강재로서 PAN계 및 Pitch계 탄소섬유를 사용하여 건재용 탄소섬유보강 실리카흄$\cdot$시멘트 복합체 및 플라이애쉬$\cdot$시멘트 복합체를 제조하여 배합조건별 동복합체의 물리적 역학적 특성에 관한 연구를 수행하였다. 시험결과, 탄소섬유보강 실리카흄$\cdot$시멘트 복합체의 휨강도, 휨인성 및 휨변형 특성은 탄소섬유 혼입율증대에 수반하여 현저히 증가하는 경향을 나타내었고, 또 이들 값은 PAN계 CF를 사용한 경유가 Pitch계 CH를 사용한 경우에 비하여 높게 나타났다. 한편, 플라이애쉬$\cdot$시멘트 복합체는 플라이애쉬 대체율의 증가에 따라 물(플라이애쉬+시멘트)비는 증가하였으나, 압축$\cdot$휨강도 및 겉보기 비중은 저하하였으며 촉진양생은 경우가 습윤양생한 경우에 비하여 우수한 압축강도 및 휨강도를 나타내었다. 또한, 기존ALC의 대체를 위한 경량 플라이애쉬\ulcorner시멘트 복합체를 개발하였고, 그 최적배합조건을 제시하였다.