• Advances in materials Research
• /
• 제11권4호
• /
• pp.251-277
• /
• 2022

Disposal of industrial waste in cities where municipal authorities permitting higher floor area ratio coupled with increasing living standards, a lot of demolition waste is being generated. Its disposal is a challenge particularly in megacities where no landfills are available. The ever-increasing cost of building construction materials also necessitates consuming demolition wastes in a useful manner to save fresh natural raw materials. In the present work, the crushed waste glass is used in high-strength concrete as a partial replacement of fine aggregate. The control concrete of grade M60 was proportioned following BIS 10262-2009. The crushed waste glass has been used as a partial replacement with varying percentages of 10, 20, 30, and 40% by weight of fine aggregate. Experimental tests were carried on the fresh and hardened state of the concrete. The effect of crushed waste glass on the workability of the concrete has been investigated. Non-destructive tests, acid attack tests, compressive strength, split tensile strength, and X-ray diffraction analysis was carried out for the control concrete and concrete containing crushed waste glass after 7, 28, and 270 days of normal curing. The results show that for the same w/c ratio, the workability of concrete increases with increasing replaced crushed waste glass content. However, the decrease in compressive strength of the concrete after 28 days of normal curing and further after 28 days of acid attacks, up to 30% replacement level of fine aggregate by the crushed waste glass is insignificant.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.405-410
• /
• 2015

Today, the booming construction in Ethiopia is leading to an increased demolition of concrete structures whereby these demolished structures are disposed at landfills. The current practice is creating a huge amount of waste which is environmentally unfriendly and is becoming the main source of pollution in communities. This paper discusses the potential use of demolished concrete from site tested specimens as a recycled aggregate material for new structural concrete. The mechanical, physical and chemical properties of RCA are studied to understand the suitability in the production of recycled concrete. Tests including gradation, unit weight, soundness, density, and abrasion will be conducted to assess RCA properties. Since the percentage of RCA govern the strength of concrete, a C25 concrete is mixed by the ratio of 25%, 50% & 100% RCA with and without water reducing admixture and a control mixture composed of natural aggregate. The output of this study will highly impact the growing construction industry and communities in Ethiopia thereby reducing waste, saving cost, conserving natural aggregates, building capacity and setting quality standards.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.227-228
• /
• 2017

In this study, the inductor heating which is confined to the metal processing is used by demolition technology in reinforced concrete. And, the purpose is the verification of realization for this technology. Using the inductor heating device, the temperature rising is measured depending on the difference of the generating capacity. And, the demolition of reinforced concrete is evaluated by the vulnerability of concrete due to the inductor heating of rebar in reinforced concrete.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권4호
• /
• pp.97-105
• /
• 2004

사회가 발전함에 따라 시민들은 콘크리트 구조물의 해체에 있어 안전하고, 경제적이며, 환경친화적인 공법의 적용을 요구하고 있다. 본 연구에서는 기존 해체공법의 문제점을 검토하여 환경오염의 주원인인 냉각수와 슬러지를 최소화 할 수 있는 공법을 개발하였으며, 개발된 공법의 타당성은 유한요소해석을 통하여 확인하였다. 천공개수, 깊이, 크기, 그리고 자중을 변수로 선정하여 다양한 경우에 대한 비교 분석을 수행하였으며, 자중에 따른 최적의 천공개수, 천공깊이, 천공크기를 제시하였다.

• 화약ㆍ발파
• /
• 제40권3호
• /
• pp.54-65
• /
• 2022

최근 대규모 산업구조물의 해체수요가 증가하고 있으며, 해체된 산업부지를 원래 자연환경으로 복원하는 공사가 진행하고 있다. 본 시공사례는 구조적 노후화와 기능적 요건을 만족하지 못하는 대단면 철근콘크리트 구조물인 터빈기초를 해체하기 위해 발파해체공법을 적용하였다. 발파해체 결과 터빈기초의 파쇄상태는 양호하였고, 주변 시설물의 피해 없이 발파해체를 완료하였다.

• 화약ㆍ발파
• /
• 제25권1호
• /
• pp.53-65
• /
• 2007

축소모형을 이용한 철근콘크리트 구조물 발파해체 시 구조물의 붕괴거동을 분석하기 위해서는 축소모형 부재에 대한 적절한 축소율 산정과 축소모형 부재를 구성하는 재료의 역학적 특성이 원형 철근콘크리트 부재와 상사되어야 한다. 본 연구에서 축소모형의 상사법칙은 밀도를 기준으로 산정하였고, 콘크리트 표준시방서와 콘크리트 구조설계기준에 의해 축소모형 철근콘크리트의 배합 및 배근을 기술하였다. 또한 축소모형 콘크리트의 축소율은 굵은골재 최대치수를 고려하여 부재 단면 길이를 1/5로 축소하였고, 축소모형 철근의 축소율은 공칭지름을 1/5로 축소하였다. 축소모형에 대한 역학적 실험결과로부터 제안된 상사법칙을 적용함으로써 축소모형 콘크리트의 평균압축강도 및 축소모형 철근의 평균항복강도가 상사관계를 가지는 것으로 나타났다.

• 대한건축학회논문집:구조계
• /
• 제36권4호
• /
• pp.153-161
• /
• 2020

This study investigates the recycling potential of demolition waste (DW) according to building structure, while considering economic aspects. For that, this study surveyed 1,034 residential buildings to collect reliable information on demolition waste generation rates (DWGRs). This study suggested a method for operational cost calculation for each stage and carried out an inventory analysis. The economic value of recycled DW materials was also calculated. And then, the recycling potential(RP) was calculated by building structures and waste types. RP by building structure was low (27-40%), and RP was found in the order of masonry-block, wooden, RC and concrete-brick. By type of DWs, the RP of aggregates was considerably lower than 7%, and DWs such as wood, plastics, and metals showed more than 100% RP. Considering the results of this study, In order to improve the RP of buildings and DWs, the diversification of products that recycled waste like aggregates (i.e., mortar, concrete, bricks, blocks, tiles) and the development of high value-added products are considered to be the most urgent problems. Based on the above RP results, this study proposed a more advanced method for life cycle assessment of buildings and demolition waste.

• Coupled systems mechanics
• /
• 제7권2호
• /
• pp.111-139
• /
• 2018

A successful methodology for modelling controlled destruction and progressive collapse of 2D reinforced concrete frames is presented in this paper. The strategy is subdivided into several aspects including the failure mechanism creation, and dynamic motion in failure represented with multibody system (MBS) simulation that are used to jointly capture controlled demolition. First phase employs linear elasto-plastic analysis with isotropic hardening along with softening plastic hinge concept to investigate the complete failure of structure, leading to creation of final failure mechanism that behaves like MBS. Second phase deals with simulation and control of the progressive collapse of the structure up to total demolition, using the nonlinear dynamic analysis, with conserving/decaying energy scheme which is performed on MBS. The contact between structure and ground is also considered in simulation of collapse process. The efficiency of the proposed methodology is proved with several numerical examples including six story reinforced concrete frame structures.

• Journal of Construction Engineering and Project Management
• /
• 제3권1호
• /
• pp.28-34
• /
• 2013

Use of recycled aggregates in portland cement concrete (PCC) construction can offer benefits associated with both economy and sustainability. Testing performed to date indicates that recycled brick masonry aggregate (RBMA) can be used as a 100% replacement for conventional coarse aggregate in concrete that exhibits acceptable mechanical properties for use in structural and pavement elements, including satisfactory performance in some durability tests. Recycled brick masonry aggregate concrete (RBMAC) is currently not used in any type of construction in the United States. However, use of RBMAC could become a viable construction strategy as sustainable building practices become the norm. This paper explores the feasibility of use of RBMAC in several types of sustainable construction initiatives, based upon the findings of previous work with RBMAC that incorporates RBMA produced from construction and demolition waste from a case study site. A summary of material properties of RBMAC that will be useful to construction professionals are presented, along with a discussion of advantages and impediments to use. Several quality assurance and quality control techniques that could be incorporated into specifications are identified.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.439-444
• /
• 2001

In many countries a considerable amount of demolition wastes is generated and wastes concrete constitutes a significant proportion of the construction waste. Therefore, the necessity for the use of recycled aggregate in concrete arise and the reuse of a waste concrete may solve the problems of environmental pollution and shortage of natural aggregate. The Purpose of the present study is to investigate the effects of the recycled aggregate on the compressive strength, the permeability and the air-void system.