• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.205-212
• /
• 1999

Recently, unexpected cracks in the concrete deck slab of composite steel bridges have been widely reported at an early age of concrete placing due to the concrete placing sequence and methods. Accordingly, the analytical research was carried out to verify the negative moment at an internal supports due to the several concrete pouring sequence and to determine the reasonable concrete placing method on the deck slab of composite steel bridge. The results show that the conventional concrete-placing method, which pours concrete first on the positive moment regions and then negative regions, leads to the minimum moment at an internal supports. However, the conventional method produces two impractical construction joints on every spans and makes field engineer to pour concrete continuously. In conclusion, this concrete-placing method was verified to be reasonable only when the construction joint was placed at the $\frac{5}{8}l{\sim}\frac{6}{8}l$ location of the middle span.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.436-442
• /
• 2011

It is increasing construction of long span railway bridge with concrete track system for speed up of railway and efficient maintenance of track. As the sleeper of the concrete track system layed on a bridge is fixed on deck of the bridge, the displacement of the sleeper and deck is same. Therefore, the spacing between two sleeper installed at the end of the adjacent deck near the expansion joint of bridge becomes vary according to the longitudinal expansion of a deck by temperature change. By the way, if the spacing of sleepers become increase excessively, it causes large bending stress of in a rail, and it can leads failure or reduction of fatigue life of the rail. And also the excessive displacement of the rail may induce decrease ride comfort. Therefore, in order to prevent such problems, the allowable maximum sleeper spacing at a bridge expansion joint was mutually determined. And, the determination procedure of the maximum bridge expansion length based on the allowable sleeper spacing was suggested.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.363-366
• /
• 2005

When widening or repairing concrete deck slab, there is a joint inevitably. However, joining-construction method have following problem, that is the additional stress in existing part of bridge resulting from the specific process of joining-construction and the difference of amount of shrinkage between new and existing bridge. On this study, compared shrinkage stress of the direct joining construction method with the indirect joining construction method, and concluded the proper substitution rate of expansion cement. The rate of replacement was proper at $10\%$. but more than $15\%$, concrete had excessive expansion and weeker compressive strength. The time of placing closure concrete, considering the shinkage stresses and creep, was suitable in $45\~60$ days after placing the new concrete deck slab.

• Structural Engineering and Mechanics
• /
• 제55권4호
• /
• pp.801-813
• /
• 2015

Flexural stiffness of bridge spans has become even more important parameter since Eurocode 1 introduced for railway bridges the serviceability limit state of resonance. For simply supported bridge spans it relies, in general, on accurate assessment of span moment of inertia that governs span flexural stiffness. The paper presents three methods of estimation of the equivalent moment of inertia for such spans: experimental, analytical and numerical. Test loading of the twin truss bridge spans and test results are presented. Recorded displacements and the method of least squares are used to find an "experimental" moment of inertia. Then it is computed according to the analytical method that accounts for joint action of truss girders and composite deck as well as limited span shear stiffness provided by diagonal bracing. Finally a 3D model of finite element method is created to assess the moment of inertia. Discussion of results is given. The comparative analysis proves efficiency of the analytical method.

• 콘크리트학회논문집
• /
• 제28권5호
• /
• pp.545-553
• /
• 2016

이 논문에는 교량바닥판의 지간장이 짧은 단지간용 프리캐스트 콘크리트패널에 대해 수행한 정적하중 재하실험 결과들을 나타내었다. 단지간용 콘크리트패널은 콘크리트패널 하면에 콘크리트리브가 부착되어 있으며, 기존 LB-DECK과 달리 콘크리트패널 상면에 Top bar가 없는 단면이다. 콘크리트패널에 부착되는 콘크리트리브의 개수와 단면 상세는 교량바닥판의 지간장과 철근콘크리트바닥판 두께 변화에 따른 설계하중에 대해 변수해석 결과를 토대로 결정하였다. 콘크리트패널 상면에는 현장타설되는 콘크리트와 합성거동을 위해 전단철근을 배치하였다. 변수해석을 통해 산정된 콘크리트패널이 설계하중에 대해 사용성과 안전성을 만족하는 가를 확인하기 위해 정적하중 재하실험을 수행하였다. 지간장 1.6 m인 단지간 콘크리트패널 실험체 3개 제작한 후 정적하중 재하하면서 각 실험체의 처짐, 균열, 그리고 최종 파괴양상을 살펴보았다. 설계하중이 작용할 때 각 실험체의 처짐, 균열하중, 그리고 균열폭을 토대로 사용성을 평가하였다. 또한 각 실험체의 최종 파괴양상과 극한강도를 토대로 계수설계하중에 대한 안전성을 평가하였다. 실험 결과 단지간용 콘크리트패널이 사용성과 안전성을 만족하는 것을 확인할 수 있었다. 추가적으로 단지간용 콘크리트패널을 적용할 수 있는 교량바닥판의 지간장 범위를 검토하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.299-304
• /
• 2003

In this research, eight waterproofing membranes were selected from commercial market and the tensile adhesive characteristics of the waterproofing system (WPS) on concrete bridge deck were investigated in view of various factor in asphalt pavement. Tensile adhesive strength (TAS) test of different asphalt pavement types showed that TAS of WPS under SMA (Stone Mastic Asphalt) pavement was greater than that under dense asphalt pavement. Tensile adhesive strength (TAS) of sheet membranes was improved as the compaction temperature of asphalt concrete increase, but TAS of liquid membranes were not. TAS of sheet membranes after wheel tracking test were in the order of the sites under wheel path (UWP), before wheel tracking (BWT) and nearby wheel path (NWP), Since TAS of the same WPS of UWP was higher than TAS of BWT, wheel loading had function of pressing WPS resulting in higher adhesive strength, But liquid membranes were variable on types, The feature of detached interface after T AS test showed that sheet types were all detached in between deck concrete and WPS, and liquid types were detached in between asphalt pavement and WPS,

• Composites Research
• /
• 제24권5호
• /
• pp.29-33
• /
• 2011

교량 바닥판에서 고성능 재료의 적용은 고가임에도 불구하고 바닥판 중량 감소와 경제성 향상을 위한 대안으로 대표될 수 있다. 초고성능콘크리트 재료를 활용한 교량에서 기존의 헤드형 스터드가 바닥판과 강재 거더사이의 전단력을 충분히 전달할 수 있는지 그 적용성을 검증할 필요가 있다. 이 논문에서는 UHPC 교량 바닥판과 강재 거더의 합성거동을 분석하기 위해 2면 전단실험을 수행하였다. 정적 재하 실험 결과 헤드형 스터드의 실험체별 극한강도는 직경에 비례였으며, 일반 콘크리트, 교량 바닥판에 비해 전단강도가 향상되는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.789-792
• /
• 2008

RC 교량의 손상발생 중 많은 부분을 차지하고 있는 바닥판은 동절기에 제설제 사용에 따라 콘크리트의 동결융해에 대한 내력저하와 표면열화, 심한 스켈링(Scaling)발생으로 상부 아스콘 포장층을 손상시키고 내부의 철근 부식을 가속화시켜 교량의 공용성을 저하시키는 주 요인으로 작용하고 있다. 이에따라 교량 바닥판은 우수나 제설제로 부터 콘크리트 표면의 보호를 위해 침투식 또는 도막식 방수재를 시공하여왔다. 본 연구에서는 교량 상부 포장층의 열화가 발생된 고속도로 교량을 대상으로 바닥판에서 채취한 코어를 통해 아스콘 포장층과 하부 콘크리트 바닥판의 상태를 조사한 결과 콘크리트 바닥판에 시공된 교면방수층에서 도막의 손상이나 발수성저하로 인해 우수나 제설제의 침투를 일차적으로 방지하지 못해 열화가 일어나는 것으로 나타나고 있어 교면방수를 위해 사용되는 재료의 성능평가와 시공에 대해 보다 많은 연구와 검증이 필요한 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1248-1253
• /
• 2011

It is increasing construction of long span railway bridge with concrete track system for speed up of railway and efficient maintenance of track. As the sleeper of the concrete track system layed on a bridge is fixed on deck of the bridge, the displacement of the sleeper and deck is same. Therefore, the spacing between two sleeper installed at the end of the adjacent deck near the expansion joint of bridge becomes vary according to the longitudinal expansion of a deck by temperature change. By the way, if the spacing of sleepers become increase excessively, it causes large bending stress of in a rail, and it can leads failure or reduction of fatigue life of the rail. Further more, the excessive displacement of the rail may induce decrease ride comfort as well as corrugation of rail surface. Therefore, it is required to determine the allowable maximum sleeper spacing to prevent such problems. For the purpose, investigation on the influence factor on sleeper spacing for straight track was carried out. Variation of bending moment in a rail, wheel force, and the ratio of primary and secondary deflection of the rail according to sleeper spacing was investigated, and, as a result, the maximum allowable sleeper spacing at the bridge expansion joint was suggested.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.313-318
• /
• 2002

The use of carbon fiber rods is a promising technology of increasing flexural and shear strength of deficient reinforced concrete members. The purpose of this experimental study is to investigate the fatigue behavior and strengthening effects of the strengthened bridge deck with isotropic and othortropic carbon fiber rod. This study shows a fatigue loading, compliance and S-N Curve between strengthened isotropically and othortropically. Then estimate the effective fatigue behavior of RC slab using composite rods that are inserted in high special purposed polymer mortar.