• The Journal of Korean Association of Computer Education
• /
• v.17 no.1
• /
• pp.51-63
• /
• 2014

Learning objectives is used to be a good guidance of a class evaluation and activity design for an effective teaching and learning activities in class. Anderson's taxonomy of Educational Objectives that was a revision of Bloom's taxonomy has presented in research field of other subject matters and used as a better guideline for analyzing learning objectives in textbook and achievement levels in test recently. This study has behaved some questionnaires for that Anderson's taxonomy is suitable for a guideline of stating learning objective in Informatics subject matter, and analyzed the learning objectives in 6 Informatics textbooks by Anderson's taxonomy. It has proposed that Anderson's taxonomy is satisfactory for expressing learning objective of Informatics subject matter in class and some dimensions, such as conceptual and procedural knowledge, understand, and apply, are much more used in learning objectives in 6 Informatics textbooks. This results will be a good case study in research about taxonomy of educational objectives and development of Informatics textbooks.

• Journal of Service Research and Studies
• /
• v.7 no.3
• /
• pp.37-55
• /
• 2017

Recently, many business organizations have been increasingly expanding the utilization of the intelligent chatbot services for effective customer relation management. The purpose of this study is to empirically investigate the factors which affect the use of the intelligent chatbot services. Above all, the research model and the hypotheses were derived through reviewing the major relevant theories such as UX(user experience) theory(Honeycomb model), TRA(theory of reasoned action), TAM(technology acceptance model) and ETAM(extended TAM). And then, structural equation analyses using SmartPLS 3.0 for 233 valid questionnaires replies collected through the field survey was performed to test the hypotheses. Theoretically, this study can contribute to providing the conceptual framework with regard to enhancing the use of intelligent chatbot services. And practically, this study sheds new light on suggesting the guidelines to designing the UX(user experience) of the intelligent chatbot services.

• Health Policy and Management
• /
• v.18 no.4
• /
• pp.125-147
• /
• 2008

The purpose of this study is to propose the factors affecting collaboration between community nurses and social workers in Korea. Data that is used in this study, were collected from 295 provider respondents by questionnaire, additionally from telephone survey and secondary data review. This study focuses on the working relationship between professionals in the field of health and social care. Based on the literature review, this study proposes a conceptual framework for collaboration between nurses and social workers in community health and social care. The dependent variable in this study is collaboration. It reveals whether or not the inter-professional works and shows the level of collaboration. The independent variables are categorized in: the client characteristics (frailty of client, client-provider relationship); the provider characteristics (specialization, perception of interdependence, perception of the other professional); the organization characteristics (closeness of the other professional, autonomy, on-the-job training, evaluation-reward); and the community characteristics (urbanization, capacity of resources). Major findings are as follows: First, the factors that appear to have the strongest impact on whether or not inter-professional working of respondent sampled are: the perception of other professional; the perception of interdependence; closeness of, the, other professional; and the frailty of client. Secondly, the factors that found to have the most significant effect on level of cooperation are: the perception of, the other professional; on-the-job training; evaluation-reward; and the closeness of the other professional.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.203-220
• /
• 2017

In the field of visual arts, the introduction of synthesis allowed us to express various expressions that were outside the constraints of time and space. Digital synthesis is constrained by realistic representation due to technical limitations. However, it is no exaggeration to say that after digital synthesis has been fully established, at least the limits of image representation through synthesis have almost disappeared. The existing research papers on composing are either technical studies on the production techniques, or the synthesis was mainly focused on the change of the space-time concept and meaning of the visual arts. I felt the need for research on. In addition, I felt the need to look back on the changes in my view of art. Therefore, in this paper, rather than dealing with the conceptual theory of the technical part or spatio-temporal extension, it is necessary to classify it as natural, heterogeneous, heterogeneous and natural according to the traits revealed in the artistic expression of art, And diversity.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.3
• /
• pp.195-200
• /
• 2018

The present paper describes the design of a Solid State Telescope (SST) on board the Korea Astronomy and Space Science Institute satellite-1 (KASISat-1) consisting of four [TBD] nanosatellites. The SST will measure these radiation belt electrons from a low-Earth polar orbit satellite to study mechanisms related to the spatial resolution of electron precipitation, such as electron microbursts, and those related to the measurement of energy dispersion with a high temporal resolution in the sub-auroral regions. We performed a simulation to determine the sensor design of the SST using GEometry ANd Tracking 4 (GEANT4) simulations and the Bethe formula. The simulation was performed in the range of 100 ~ 400 keV considering that the electron, which is to be detected in the space environment. The SST is based on a silicon barrier detector and consists of two telescopes mounted on a satellite to observe the electrons moving along the geomagnetic field (pitch angle $0^{\circ}$) and the quasi-trapped electrons (pitch angle $90^{\circ}$) during observations. We determined the telescope design of the SST in view of previous measurements and the geometrical factor in the cylindrical geometry of Sullivan (1971). With a high spectral resolution of 16 channels over the 100 keV ~ 400 keV energy range, together with the pitch angle information, the designed SST will answer questions regarding the occurrence of microbursts and the interaction with energetic particles. The KASISat-1 is expected to be launched in the latter half of 2020.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.73-79
• /
• 2003

In a pressurized water reactor, radioactive corrosion products (CRUD) in primary coolant system are one of the major sources for the occupational radiation exposure of the personnel in a nuclear power plant. Through the recent trend of long term fuel cycle in a nuclear power Plant, radioactive corrosion products deposited in reactor core for a long time are also the cause of Axial Offset Anomaly (AOA) having m effect on reactor power by the hideout of boron. CRUD consist primarily of magnetite, nickel ferrite, cobalt ferrite, and so on. They have the characteristic of strong magnetism. Therefore it is performed the conceptual design to develop the filter which removes the CRUD by magnetic field that is generated by an arrangement of permanent and electric magnets. Contrary to the conventional filter, the proposed filter does not interrupt the fluid flow, so there is little pressure drop and it can be used continuously. It is expected to be applied as one of the technologies for removal of the CRUB.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.75.1-75.1
• /
• 2011

Coal gasification is considered as one of the most prospective technologies in energy field since it can be utilized for various products such as electricity, SNG (Synthetic Natural Gas or Substitute Natural Gas) and other chemical products. Among those products from coal gasification, SNG is emerging as a very lucrative product due to the rising prices of oil and natural gas, especially in Asian countries. The process of SNG production is very similar to the conventional IGCC in that the overall process is highly dependent on the type of gasifier and coal rank. However, there are some differences between SNG production and IGCC, which is that SNG plant requires higher oxygen purity from oxygen plant and more complex gas cleanup processes including water-gas shift reaction and methanation. Water-gas shift reaction is one of the main process in SNG plant because it is a starting point for the latter gas cleanup processes. For the methanation process, syngas is required to have a composition of $H_2$/CO = 3. This study reviewed various considerations for water-gas shift process in a conceptual design on an early stage like a feasibility study for a real project. The factors that affect the design parameters of water-gas shift reaction include the coal properties, the type of gasifier, the overall thermal efficiency of the plant and so on. Water-gas shift reaction is a relatively proven technology compared to the other processes in SNG plant so that it can reduce technological variability when designing a SNG project.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.87-94
• /
• 2012

This study investigates the relationship among locus of control, organizational justice, and job satisfaction. First, this study examines the conceptual structures of organizational justice through field study. Second, organizational justice influences job satisfaction. Third, locus of control influences organizational justice. Literature review identified four factors of organizational justice - distributive, procedural, interpersonal, and informational justice. These identified determinants are expected to have significant relationships with locus of control and job satisfaction. Questionnaires were distributed to 500 members of a manufacturing companies. Among returned questionnaires, 357 samples were used for empirical study. Structural equation analyses based on PLS (partial least square) method were employed to test the hypotheses and the model. The overall adequacy of fit was found to be acceptable. Confirmatory factor analyses supported a 4-factor structure of organizational justice. Distributive, procedural, interpersonal, and informational justice had significant positive effects on job satisfaction. In addition, the effects of locus of control had significant positive effects on organizational justice factors. The results of this study suggest that interpersonal and informational justice should be regarded as important factors of organizational justice to analyze the relationships between locus of control and job satisfaction as well as the relationships among the justice constructs.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.41-50
• /
• 2017

The purpose of this paper is to improve the service tree analysis introduced recently by Geum et al. [15]. Service tree analysis structures the service based on the customer participation perspective and provides a qualitative analysis method categorizing the service elements on the basis of its impact to top service. This paper attempts to apply the concept of reliability importance to the service tree analysis as a perspective of quantitative analysis, which is considered little in Geum et al. [15]. Reliability importance is a measure of the structural impact of the components that make up the system on the system lifetime in reliability engineering field and often used in fault tree analysis. We transform the reliability importance into service importance in accordance with service tree analysis, so that the influence of service elements on the service can be judged and compared. The service importance is defined as the amount of change of the service according to the change of the service element, therefore, it can be utilized as an index for determining a service element for service improvement. In addition, as an index for paired service elements, the relationship between the two service components can be measured by joint service importance. This paper introduces conceptual changes in the process of applying reliability importance to service analysis, and shows how to use the service importance for identifying the priority of service element for the final service and improving customer satisfaction through an example. By using the service importance and joint service importance in service tree analysis, it is possible to make efficient decision making in the process of determining the service elements for analyzing and improving the service.

• Research in Mathematical Education
• /
• v.22 no.4
• /
• pp.261-282
• /
• 2019

The research related to testing pupils' achievement in the field of Measurement and Measure in initial teaching of geometry points to an insufficient adoption of the basic components of the length measurement concept among pupils. In order to discover the cause, we looked at the basic components on which the procedure of measuring length using a ruler is based, highlighted the possibilities of introducing the procedure in measuring length, and determined pupils' achievement during the procedure of measuring length using a ruler. The research sample consisted of 145 pupils, out of which 72 were the 2^nd grade pupils and 73 were the 4^th grade pupils. A descriptive method was applied in the research. The technique we used was testing, and for the statistical data processing we used a χ² test. The results of the research show that, when drawing a straight line of a given length using a ruler, there is no statistical difference in achievement between the 2^nd and 4^th grade pupils, nor in the pupils' knowledge regarding drawing a ruler independently, while drawing a straight line of a given length using a "broken" ruler 4^th grade pupils are statistically better. The results of the research indicate that pupils' achievement is better in doing standard tasks than in non-standard ones, given that the latter require conceptual knowledge. The components of the concept of length measurement using ruler have not been sufficiently developed yet, and these include: zero-point, partitioning a measured object in a series of consecutive measurement units and their iteration. We shed more light on the critical stage in the procedure of length measurement - the transition from non-standard to standard units and the formation of the length measurement scale. For further research, we propose to look at the formation of the concept of length measurement using the ruler through all its components and their inclusion in the mathematics curriculum, as well as examining the correlation of pupils' achievement in the procedure of measuring length with their achievement in measuring area (and volume).