• Journal of the Korean Chemical Society
• /
• v.8 no.1
• /
• pp.20-24
• /
• 1964

The linear combination of bond orbitals method is used to investigate the reactivity of halomethanes in abstraction reactions by atoms. The activation energy is evaluated on the assumption that, in an activated complex, two electrons in a bond to be broken become completely isolated from the rest of the ${\sigma}$-electron systems. Such a model leads to an intuitively attractive concept that the interactions between the reactive bond and the neighboring bonds govern the reactivity of ${\sigma}$-electron systems. The resulting equation for the activation energy, ${\varepsilon},\;is:\;{\narepsilon}= ${\varepsilon}={\zeta}+$$${\sum}_{i=1}^3$${\eta}c-I,$ c-4 Here, subscript C-4 indicates the bond to be broken, while C-i represents the other three bonds surrounding the reactive bond; ξ is the activation energy of a hypothetical reaction of an isolated C-4 bond and an attacking atom; and ${\eta}$C-i,C-4 stems from the stabilizing interacting of C-4 bond with neighboring C-i bonds. A choie of η′s consistent with bond strength data simplifies the above equation to a form ${\varepsilon}={\zeta}\;+\;N{\eta}c$-H, C-4 where N denotes the number of C-H plus C-F bond in halomethanes. In agreement with this equation, experimental -values increase linearly with increasing N.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.667-673
• /
• 2005

The purposes of this study were 1) to analyze the preference of leadership style among ${\lceil}$Transformational leadership$\rfloor$ and ${\lceil}$Service leadership$\rfloor$, 2) to examine the differences of the job satisfaction between the high level of service leadership group and low level of the service leadership group and 3) to testify the hypothesis that the service leadership and its 4 elements (belief, attitude, ability, insight) affect the job satisfaction. The questionnaires were developed to measure the service leadership, the preference of leadership style (transfer-mational leadership and service leadership) and Job satisfaction. The surveys were distributed to 120 managers and employees in the family restaurant in Korea, and 104 questionnaires were responded (response rate: $86.7\%$). The SPSS 12.0 package program was used to conduct the descriptive analysis, correlation analysis, t-test and multiple regression analysis. The result of leadership style preference showed the followers preferred the service leadership $(75.0\%)$ to the transformational leadership $(25.0\%)$. Comparing the job satisfaction of high level of service leadership group and that of low level of service leadership group, the job satisfaction of high level of service leadership group was significantly (p<0.001) higher than that of low level of service leadership group (high level of service leadership group: 4.03, low service leadership group: 3.27, measured on a 5-point likert scale). All three factors of job satisfaction (human factor, service system and company image) in high level of leadership group were significantly (p<0.001) higher than those of lower level of service leadership group. The result of multiple regression analysis presented that the service leadership and it's 4 elements (concept, mind, skill, insight) have significant (p=0.000) effects on the job satisfaction. As a conclusion, we examined theoretical framework of service leadership model and testified the applicability in the field of family restaurants. But the service leadership was the new conceptual theory, so there should be the more empirical studies on managers and employees in the service industry.

• The Journal of Small Business Innovation
• /
• v.20 no.1
• /
• pp.35-46
• /
• 2017

The purpose of this study is to obtain the implications for establishing a marketing strategy for retailers by analyzing whether the consumer's preference for products (food) is influenced by on-line, off-line, and omni-channel preferences. The research model consisted of the effects of consumers' food selection characteristics on business preference and omni channel preference. The results of analysis based on 477 questionnaires are summarized as follows. First, food purchasing characteristics that utilize the seven characteristics of (1) freshness of food, (2) taste, (3) quality and safety, (4) tasting, (5) food function and information, (6) country of origin, and (7) brand loyalty, has various effects on types of business preference, omni-channel preference. The adopted hypotheses were selected in order of brand loyalty (5 times), freshness (3 times), tasting (3 times), and origin (1 time). The selective attributes on foods are: (1) what kind of brand, (2) how good the freshness is, (3) tasting. (4) The country of origin is to be compressed. Actually consumers seem to utilize only the core selective factors that are appropriate to the characteristics of the distribution channel rather than all of them in the shopping of the food, and there is three characteristics on Convenience Store and only one or two factors in the other types of business. Second, in the analysis of the omni-channel preference analysis, food selection characteristics has been shown to have a limited effect, which is attributed to the fact that the consumer has not yet understood the concept of omni channel. Third, the results of this study suggest that there is a need to reflect the selection characteristics of foods that have diverse influences by business type in the marketing strategies. Because consumers make reasonable consumption to use both on-line and off-line simultaneously, consumers who use Omni Channel focus on quality and safety of food, identify products through tasting, pursue brands that can trust anywhere. Customers who pursue rationality will have a high preference for using Omni Channel. Product choice characteristic has significant effect on omni-channel preference. For a few years, omni-channel strategy of retailers meets with a difficulty. This study make a first attempt to study omni-channel preference changing retailing paradigm.

• The Journal of Society for e-Business Studies
• /
• v.19 no.4
• /
• pp.231-249
• /
• 2014

We define $21^{st}$ century as an amalgamation of globalization and localization, or Glocalization. Additionally, due to the increasing supply of smart phones and wide usage of social networking services, the ability to utilize such global and regional information has increased a coperation's competitiveness in its market, and even the business models have evolved from the conventional "production and distribution" to E-commerce, through which either a direct or a non-direct transaction is possible. My hypothesis is that the ability to adapt to this trend is possible through transfer of learning, and consequently, this will have an impact on company's performance. Thus, this thesis analyzes the mid- to the long-term impact of such ability and environmental factors on the performance and technology innovation of Korean companies in China. Ultimately, this study intends to engender a basic foundation for a corporation's management strategy in China. Finally this research focuses on those Korean companies in China only and on the proof of influential factors' impact on technological innovation and technological innovation's impact on those corporations' future performances. Section I is an abstract and section II, the case examines the uniqueness and current status of Korean companies in China identifies the concept and the definition of influential factors such as education-orientation, technological innovation, and performance, and then scrutinizes each factors through a closer look at their past researches. Section III explains the thesis model, the survey's method and target, the thesis, variable factors, the content, and the method of analysis. In section IV, the thesis is proved based on the outcome of the survey. The result in Section V highlights the high comprehension of technological innovation: both education-orientation and technological innovation prove to have a positive (+) correlation with the performance. The vision on education orientation proves to have a positive (+) influence on technological innovation. The vision on education-orientation and technological innovation prove to have a positive (+) influence individually on company's performance.

• Journal of KIISE:Databases
• /
• v.28 no.4
• /
• pp.742-757
• /
• 2001

Since database management systems(DBMSS) have limited lock resources, transactions requesting locks beyond the limit mutt be aborted. In the worst carte, if such transactions are aborted repeatedly, the DBMS can become paralyzed, i.e., transaction execute but cannot commit. Lock escalation is considered a solution to this problem. However, existing lock escalation methods do not provide a complete solution. In this paper, we prognose a new lock escalation method, adaptive lock escalation, that selves most of the problems. First, we propose a general model for lock escalation and present the concept of the unescalatable look, which is the major cause making the transactions to abort. Second, we propose the notions of semi lock escalation, lock blocking, and selective relief as the mechanisms to control the number of unescalatable locks. We then propose the adaptive lock escalation method using these notions. Adaptive lock escalation reduces needless aborts and guarantees that the DBMS is not paralyzed under excessive lock requests. It also allows graceful degradation of performance under those circumstances. Third, through extensive simulation, we show that adaptive lock escalation outperforms existing lock escalation methods. The results show that, compared to the existing methods, adaptive lock escalation reduces the number of aborts and the average response time, and increases the throughput to a great extent. Especially, it is shown that the number of concurrent transactions can be increased more than 16 ~256 fold. The contribution of this paper is significant in that it has formally analysed the role of lock escalation in lock resource management and identified the detailed underlying mechanisms. Existing lock escalation methods rely on users or system administrator to handle the problems of excessive lock requests. In contrast, adaptive lock escalation releases the users of this responsibility by providing graceful degradation and preventing system paralysis through automatic control of unescalatable locks Thus adaptive lock escalation can contribute to developing self-tuning: DBMSS that draw a lot of attention these days.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.237-237
• /
• 2015

The district of Marlborough has had more than its share of river management projects over the past 150 years, each one uniquely affecting the geomorphology and flood hazard of the Wairau Plains. A major early project was to block the Opawa distributary channel at Conders Bend. The Opawa distributary channel took a third and more of Wairau River floodwaters and was a major increasing threat to Blenheim. The blocking of the Opawa required the Wairau and Lower Wairau rivers to carry greater flood flows more often. Consequently the Lower Wairau River was breaking out of its stopbanks approximately every seven years. The idea of diverting flood waters at Tuamarina by providing a direct diversion to the sea through the beach ridges was conceptualised back around the 1920s however, limits on resources and machinery meant the mission of excavating this diversion didn't become feasible until the 1960s. In 1964 a 10 m wide pilot channel was cut from the sea to Tuamarina with an initial capacity of $700m^3/s$. It was expected that floods would eventually scour this 'Wairau Diversion' to its design channel width of 150 m. This did take many more years than initially thought but after approximately 50 years with a little mechanical assistance the Wairau Diversion reached an adequate capacity. Using the power of the river to erode the channel out to its design width and depth was a brilliant idea that saved many thousands of dollars in construction costs and it is somewhat ironic that it is that very same concept that is now being used to deal with the aggradation problem that the Wairau Diversion has caused. The introduction of the Wairau Diversion did provide some flood relief to the lower reaches of the river but unfortunately as the Diversion channel was eroding and enlarging the Lower Wairau River was aggrading and reducing in capacity due to its inability to pass its sediment load with reduced flood flows. It is estimated that approximately $2,000,000m^3$ of sediment was deposited on the bed of the Lower Wairau River in the time between the Diversion's introduction in 1964 and 2010, raising the Lower Wairau's bed upwards of 1.5m in some locations. A numerical morphological model (MIKE-11 ST) was used to assess a number of options which led to the decision and resource consent to construct an erodible (fuse plug) bank at the head of the Wairau Diversion to divert more frequent scouring-flows ($+400m^3/s$)down the Lower Wairau River. Full control gates were ruled out on the grounds of expense. The initial construction of the erodible bank followed in late 2009 with the bank's level at the fuse location set to overtop and begin washing out at a combined Wairau flow of $1,400m^3/s$ which avoids berm flooding in the Lower Wairau. In the three years since the erodible bank was first constructed the Wairau River has sustained 14 events with recorded flows at Tuamarina above $1,000m^3/s$ and three of events in excess of $2,500m^3/s$. These freshes and floods have resulted in washout and rebuild of the erodible bank eight times with a combined rebuild expenditure of $80,000. Marlborough District Council's Rivers & Drainage Department maintains a regular monitoring program for the bed of the Lower Wairau River, which consists of recurrently surveying a series of standard cross sections and estimating the mean bed level (MBL) at each section as well as an overall MBL change over time. A survey was carried out just prior to the installation of the erodible bank and another survey was carried out earlier this year. The results from this latest survey show for the first time since construction of the Wairau Diversion the Lower Wairau River is enlarging. It is estimated that the entire bed of the Lower Wairau has eroded down by an overall average of 60 mm since the introduction of the erodible bank which equates to a total volume of $260,000m^3$. At a cost of $$0.30/m^3$ this represents excellent value compared to mechanical dredging which would likely be in excess of $$10/m^3$. This confirms that the idea of using the river to enlarge the channel is again working for the Wairau River system and that in time nature's "excavator" will provide a channel capacity that will continue to meet design requirements.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.131-136
• /
• 1990

여러해 전부터 선박의 생산실적이나 생산성 관련 자료를 기록하고 보완하는 작업을 꾸준히 개선토록 노력해온 결과중 중요한 것 하나는, 선박의 여러 가지 설계 검토과정에서 충분히 활용할 수 있는 함축성 있고 믿을만한 형태의 생산정보를 제공해줄 수 있게 되었다는 것이라고 말 할 수 있겠다. 이러한 자료들은 생산계획상 각 단계(stage)에서의 작업량, 예상재료비와 인건비의 산출등이 포함될 수 있으며, 선박이나 해상구조물의 전반적인 설계방법론(design methodology)을 개선코자 한다면 ''생산지향적 설계(Design for Production)''의 근간이 되는 선박건조전략(build strategy), 구매정책(purchasing policy)과 생산기술(production technology)에 대한 폭넓은 지식이 한데 어우러져야 한다. 최근에는 CIMS의 일부분에서 보는 바와 같은 경영관리, 설계 및 생산지원 시스템의 도입으로 이와 같은 설계 프로세스의 추진을 가능케하고 있다. 이와 병행하여 설계를 지원하기 위한 전산기술, 특히 대화형 화상처리기술(interactive graphics)의 발달은 설계자가 선박의 형상이나 구조 배치를 여러 가지로 변화시켜 가면서 눈으로 즉시 확인할 수 있도록 설계자의 능력을 배가시키는데 크게 기여하고 있다. 여러 가지의 설계안(alternative design arrangement)을 신속히 만들어내고 이를 즉시 검토 평가할 수 있는 능력을 초기설계 단계에서 가질 수 있다면 이는 분명히 큰 장점일 것이며, 더구나 설계초기 단계에 생산관련인자를 설계에서 고려할 수 있다면 이는 더욱 두드러진 발전일 것이다. 생산공법과 관련생산 비용을 정확히 반영한 각 가지의 설계안을 짧은 시간내에 검토하고 생산소요 비용을 산출하여 비교함으로써, 수주계약단계에서 실제적인 생산공법과 신뢰성있는 생산실적자료를 기준으로 하여 총 건조비(total production cost)를 최소로 하는 최적의 설계를 선택할 수 있도록 해 줄 것이다. 이제 이와 같은 새로운 설계도구(design tool)를 제공해 주므로써 초기설계에 각종 생산관련 정보나 지식 및 실적자료가 반영가능토록 발전되었다. 본 논문은 영국의 뉴카슬대학교(Univ. of Newcastle upon Type)에서 위에 언급한 특징들을 반영하여 새로운 선박구조 설계 방법을 개발한 연구결과를 보여주고 있다. 본 선계연구는 5단계로 구분되는데; (1) 컴퓨터 그라픽스를 이용하고 생산정보 데이타베이스와 연결시켜 구조형상(geometry)을 정의하고 구조부재 칫수(scantling) 계산/결정 (2) 블럭 분할(block division) 및 강재 배치(panel arrangement)의 확정을 위해 생산기술 및 건조방식에 대한 정보 제공 (3) 상기 (1) 및 (2)를 활용하여 아래 각 생산 단계에서의 생산작업 분석(work content assessment) a) 생산 준비 단계(Preparation) b) 가공 조립 단계(Fabrication/Assembly) c) 탑재 단계(Erection) (4) 각각의 설계(안)에 대하여 재료비(material cost), 인건비(labour cost) 및 오버헤드 비용(overhead cost)을 산출키 위한 조선소의 생산시설 및 각종 품셈 정보 (5) 총 건조 비용(total production cost)을 산출하여 각각의 설계안을 비교 검토. 본 설계 방식을 산적화물선(Bulk Carrier) 설계에 적용하여 구조배치(structural geometry), 표준화의 정도(levels of standardisation), 구조생산공법(structural topology) 등의 변화에 따른 설계 결과의 민감도를 분석(sensitivity studies)하였다. 전산장비는 설계자의 대화형 접근을 용이하도록 하기 위해 VAX의 화상 처리장치를 이용하여 각 설계안에 대한 구조형상과 작업분석, 건조비 현황 등을 제시할 수 있도록 하였다. 결론적으로 본 연구는 설계초기 단계에서 상세한 건조비 모델(detailed production cost model)을 대화형 화상 처리방법에 접합시켜 이를 이용하여 여러가지 설계안의 도출과 비교검토를 신속히 처리할 수 있도록 함은 물론, 각종 생산 실적정보를 초기설계에 반영하는 최초의 시도라고 믿으며, 생산지향적(Design for Production) 최적설계분야의 발전에 많은 도움이 되기를 기대해 마지 않는다. 참고로 본 시스템의 설계 적용결과를 부록에 요약 소개하며, 상세한 내용은 참고문헌 [4] 또는 [7]을 참조 요망한다.

• Publications of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.65-78
• /
• 2021

Jagyeokru, an automatic striking water clock described in the Sejong Sillok (Veritable Records of King Sejong) is essentially composed of a water quantity control device and a time-signal device, with the former controlling the amount or the flow rate of water and the latter automatically informing the time based on the former. What connects these two parts is a signal generating device or a power transmission device called the 'Jujeon' system, which includes a copper rod on the float and ball-racked scheduled plates. The copper products excavated under Gongpyeong-dong in Seoul include a lot of broken plate pieces and cylinder-like devices. If some plate pieces are put together, a large square plate with circular holes located in a zigzag can be completed, and at the upper right of it is carved 'the first scheduled plate (一箭).' Cylinder-like devices generally 3.8 cm in diameter are able to release a ball, and have a ginkgo leaf-like screen fixed on the inner axis and a bird-shaped hook of which the leg fixes another axis and the beak attaches to the leaf side. The lateral view of this cylinder-like device appears like a trapezoid and mounts an iron ball. The function of releasing a ball agrees with the description of Borugak Pavilion, where Jagyeokru was installed, written by Kim Don (1385 ~ 1440). The other accounts of Borugak Pavilion's and Heumgyeonggak Pavilion's water clocks describe these copper plates and ball releasing devices as the 'Jujeon' system. According to the description of Borugak Pavilion, a square wooden column has copper plates on the left and right sides the same height as the column, and the left copper plate has 12 drilled holes to keep the time of a 12 double-hours. Meanwhile, the right plate has 25 holes which represent seasonal night 5-hours (Kyeong) and their 5-subhours (Jeom), not 12 hours. There are 11 scheduled plates for seasonal night 5-hours made with copper, which are made to be attached or detached as the season. In accordance with Nujutongui (manual for the operation of the yardstick for the clepsydra), the first scheduled plate for the night is used from the winter solstice (冬至) to 2 days after Daehan (大寒), and from 4 days before Soseol (小雪) to a day before the winter solstice. Besides the first scheduled plate, we confirm discovering a third scheduled plate and a sixth scheduled plate among the excavated copper materials based on the spacing between holes. On the other hand, the width of the scheduled plate is different for these artifacts, measured as 144 mm compared to the description of the Borugak Pavilion, which is recorded as 51 mm. From this perspective, they may be the scheduled plates for the Heumgyeonggak Ongru made in 1438 (or 1554) or for the new Fortress Pavilion installed in Changdeokgung palace completed in 1536 (the 31^st year of the reign of King Jungjong) in the early Joseon dynasty. This study presents the concept of the scheduled plates described in the literature, including their new operating mechanism. In addition, a detailed model of 11 scheduled plates is designed from the records and on the excavated relics. It is expected that this study will aid in efforts to restore and reconstruct the automatic water clocks of the early Joseon dynasty.

• Journal of Korean Medicine Rehabilitation
• /
• v.31 no.4
• /
• pp.105-116
• /
• 2021

Objectives Lumbar herniated intervertebral disc (L-HIVD) is common disease in which Western-Korean collaborative treatment is performed in Korea. This study aimed to analyze Western-Korean collaborative treatment utilization of Korean patients with L-HIVD using Health Insurance Review & Assessment Service's Patients Sample Data. Methods This study used the Health Insurance Review & Assessment Service-National Patient Sample (HIRA-NPS) in 2018. Claim data of L-HIVD patients were extracted. The claim data were rebuilt with the operational concept of 'episode of care' and divided into Korean medicine episode group (KM), Western medicine episode group (WM) and collaborative treatment episode group (CT). General characteristics, medical expenses and healthcare utilization were analyzed. In addition, the difference of average visit day and average medical expenses between non-collaborative group (KM plus WM) and CT were analyzed by the propensity score matching method. Results A Total of 64,333 patients and 365,745 claims were extracted. The number of episodes of WM, KM and CT was 69,383 (92.97%), 3,903 (5.23%), and 1,341 (1.80%) respectively. The frequency of collaborative treatment episode was higher in women and the age of 50s. The most frequently described treatment in CT was acupuncture therapy. As a result of the propensity score matching, the number of visit days and medical expenses in the collaborative treatment group was higher than in the non-collaborative group. Conclusions The analysis of healthcare utilization of Korean-Western collaborative treatment may be used as basic data for establishing medical policies and systematic collaborative treatment model in the future.

• 한국노년학
• /
• v.38 no.4
• /
• pp.811-835
• /
• 2018

Social relations and cognitive function in old age are closely related to each other, and social relation is classified into structural characteristics and qualitative characteristics reflecting cognitive and emotional evaluation. The concept of social isolation is the focus of attention in relation to the social relations of old age. Social isolation has a multidimensional theoretical structure that is divided into objective dimension such as social network, type of furniture, social participation, and subjective dimension such as lack of perceived social support and loneliness. There is also a close relationship between cognitive function and interpersonal conflict in old age. In this study, we examined the effect of subjective social isolation, which shows the structural characteristics of social relations, and subjective social isolation and interpersonal conflict on the dementia occurrence by age group in the elderly. The data were analyzed by applying a random effect panel logit model using 1,740 panel data from the first year to the third year of KSHAP. The results of the analysis are summarized as follows. First, the cognitive impairment increased sharply with age. Objective and subjective social isolation were both U-shaped distribution with an inflection point of 80 years old. Second, the main effect on the probability of cognitive impairment was statistically significant with objective and subjective social isolation, but the type of interpersonal conflict did not appear to be significant. Third, the results of two-way interaction effect analysis on the probability of cognitive impairment are as follows. The relationship between subjective social isolation and the probability of occurrence of cognitive impairment was significantly different according to the level of conflict with spouse. In addition, the higher the subjective social isolation, the higher the probability of cognitive impairment in the elderly(over 85) than in the young-old(65~74). In addition, as the level of conflict with spouses increases, the probability of cognitive impairment of the oldest-old(aged 85 or older) is drastically lower than that of the young-old(aged 65~74). Based on the results of this study, policy and practical implications for reducing the cognitive impairment of the elderly age group were suggested, and limitations of the study and suggestions for future research were discussed.