• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.1
• /
• pp.27-38
• /
• 1992

The paper presents a digital speed control approach of induction motor systems by using a digital redesign method and adopting a well known 2nd order model as the system model equation. The basic concept using the modeling equation is induced from the control theory stand point such that we can describe usually the motor system connected by inverter, generator and load etc. just as a mechanical system to be controlled. The concept does not demand us the complicated vector-based modeling equation adopted in the traditional methods for the speed control of induction motor. The effectiveness of the servo control system composed by the above mentioned design concept is illustrated by the experimental results in the presence of step reference change and generator load variation. It is observed from the experimental results that the steady state error of the experimental set up becomes zero after some regulation time and the induction motor system is robust in spite of reference signal change and load variation of generator.

• Structural Engineering and Mechanics
• /
• v.65 no.3
• /
• pp.243-250
• /
• 2018

The use of blast hardened bulkheads (BHBs) is an effective vulnerability hardening technique for improving the survivability of naval warships when internal explosions occur due to being shot by an anti-surface missile. In this paper, a new concept of BHBs reinforced by aluminum (Al) foam is proposed. The new concept can significantly reduce the blast pressures transferred to bulkheads and, unlike conventional BHBs, can be easily installed to operating naval warships. Chamber model blast tests were performed to demonstrate the effectiveness of the Al-foam BHBs and the results are further supported by numerical simulations. Finally, a practical preliminary is proposed for the Al-foam BHBs.

• Journal of Ship and Ocean Technology
• /
• v.6 no.1
• /
• pp.1-15
• /
• 2002

A new concept for launching free-fall lifeboats, proposed by Yokohama National University is described in this paper. It has been pointed out that, using the conventional single-skid free-fall system, the potential for dangerous lifeboat motions (in which the lifeboat moves backward or jerks on the surface after entering the water) increases with the fall height of the lifeboat. One of the principal causes of this undesirable motion is vertical rotation of the lifeboat during its restricted fall at the edge of the launching skid. Thus a new "double-skid"launching concept is proposed to effectively eliminate the rotation of the lifeboat at the skid end and to enable the lifeboat to move smoothly after entering the water. In order to evaluate the performance of the proposed method, a series of model experiments and numerical simulations is carried out in which two lifeboat models with overall lengths of 1 meter and 6 meters are used. The effects of design parameters such as skid angle and skid height are investigated, and an example of the implementation of this new system at the stern of a large merchant ship is illustrated.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.625-631
• /
• 2002

A module design aims to develop product architecture that consists physically detachable units such as module. To develop the system of module design, this paper suggests the methodology of part grouping, evaluation of modularization of a product for improving modularization. To determine modules, module concept is proposed to satisfy the objectives of a modular design. Therefore, there are functional, structural, and process modularizations in a modular concept. Module grouping can be accomplished by using an optimization model that maximizes the sum of the weighting. The present study proposes the p-median model and the direct clustering technique. The optimal clustering solution can be obtained by comparing two clustering techniques. To find the best solution among part groups, evaluation of modularization is performed based on the concept of module design. For the evaluation of modularization, evaluation criteria of modularization are used in the matrix table.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.10a
• /
• pp.490-493
• /
• 2004

The purpose of this study is to construct technology product concept a deployment model on seeds type R&D projects. For this purpose, we have peformed the following studies : First, technology opportunities and market opportunities through ${\ulcorner}$perception analysis${\lrcorner}$ are captured by perceptional structure of technology experts and customers on the existing technologies and products. Second, the optimal technology product concept deployed by ${\ulcorner}$SAT(System Alternatives Tree)${\lrcorner}$ has been constructed by the ${\ulcorner}$PWBS(Project work Breakdown structure)${\lrcorner}$.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.261-262
• /
• 2016

In this article, we present some derived subjects from the concept of ICT-based DPD concept for the safety of folk villages in both Korea and Japan. First, our deduced topic would rather be a monitoring system design of structures in folk villages. We, therefore, offer an integrated model of maintenance and management monitoring scheme. As another research subject, we submit safety sign or sign system installed in traditional towns and their standardization. We have draw up a plan to make signs upgrade applied to folk villages in Korea and Japan. According to our investigations, we should suggest and focus on flood in the area of traditional town in Korea. We present a water-level expectation model using deep learning simulation. We have applied this method to the area of 'Andong Hahoe' village which had been registered on World Cultural Heritage of UNESCO. The final goal of our research is to propose and realize an integrated disaster prevention and/or safety system based on big data concepts for both Korea and Japan.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.227-234
• /
• 2016

In this paper, we propose a think-aloud program for acquiring abstraction concept. Think-aloud is a technique, which is good for teaching higher-order thinking skills to learner. We intend to propose a program for teaching abstraction concept to learners directly, as software education is being reinforced in the current education policy. For the study, we develop a program depending on ADDIE model. According to these steps, we analyzed related works such as computational thinking, think-aloud technique, and direct instructional model. After that, we split and structuralized the learning tasks for achieving a goal. And then, we constructed steps for the instruction and detailed contents of the program. We did a survey for verification to nine experts and we corrected the program according to it.

• Structural Engineering and Mechanics
• /
• v.82 no.2
• /
• pp.225-232
• /
• 2022

In this paper, the physical neutral surface concept is applied to study the wave propagation of functionally graded (FG) circular plate, the wave equation is derived by Hamiltonian variational principle and the first-order shear deformation plate model. Then, we convert the equations to dimensionless equations. The exact solution of wave propagation problem is obtained by Laplace integral transformation, the first order Hankel integral transformation and the zero order Hankel integral transformation. The results obtained by the current model are very close to those obtained in the existing literature, which indicates the correctness and reliability of this study. Moreover, the effects of the functionally graded index parameters and pore volume fraction on the wave propagation are also discussed in detail.

• Journal of the Korean Society for Library and Information Science
• /
• v.42 no.2
• /
• pp.109-146
• /
• 2008

This study focuses on how to introduce the concept of Information Commons(IC) into school libraries in order to help them Perform their roles required to satisfy new types of their users' demands. It intends to examine the concept of IC to draw the IC elements applicable to school libraries and propose a feasible model for them. The main objects of this study are school libraries and Information Commons. In particular, this study brings the derivation of IC elements and the construction of an IC model for school libraries into focus. This study sorted the three factors by peculiarities of school libraries. Each classification is as follows: physical elements were divided into learning space, creation space, community space, and service counters; human resources were divided into teacher-librarian. IT engineers, and student assistants; and services were divided into information literacy training and integrated, collaborative services. Based upon the derived IC constituents, it proposed a diagram that outlines the IC services concept for school libraries, an IC model and an IC floor plan for them.

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.212-223
• /
• 2012

The "Eco-friendly", "Green" concepts was began around 1992 after the Rio Environmental Summit, and the need for sustainable development globally widespread. The green building certification system was began around 2000 and the concept of green building was started in the late 1990s. The green building, which welcomes a period of radical change, is for the survival of the Earth "climate change" and reducing energy consumption in building sector. In this architecture of eco-friendly concept, the green building is rapidly expanding and existing as a ecological environment preservation. Moreover, the realization of zero energy house is to mandate for new buildings in 2025. The aim of further eco-friendly is through the prior ecosystems to restore and product energy for the 9 Green Building model houses in this paper. Building in the concept of ecology is to show about change into 7R's from the 3R's. The "Reduce", "Reuse", "Recycle" consisting of "3R's" is correlated with the traditional to the present Green Building Design. U.S. NCARB (National Council of Architectural Registration Boards) change into the concept of 7R's as "Receive", "Restore", "Respect" and "Remember", added to "3R's". In this paper, the 9 Green Building model houses do not meet the criteria of 7R's. But, the Green Tomorrow of Samsung C & T Corporation meet the 6 criteria for 7R's. This company is most comfortable at low carbon Green Building model houses. Conclusionally, introduction of eco-friendly technologies and amenities for the health of human and natural community life is to advance eco-friendly construction and enhance brand value of housing. By the way, The problem of eco-friendly architecture is initial investment and maintenance. Therefore, eco-friendly architecture and government has to try solving of this difficulty.