• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.223-229
• /
• 2016

In this study, a cold forging process was developed for the roller tappet housing of an engine valvetrain system. A tappet sample was manufactured and subjected to an endurance test. The material properties were obtained from a compression test, and forging analysis was carried out to design a forging process using a commercial program, Deform-3D. The forging process was set up based on the analysis results, and a die set and sample tappet housing were manufactured. To evaluate the sample, the dimensional accuracy, surface roughness, parallelism, and concentricity were measured and confirmed. To evaluate the actuation and durability, a special test rig was developed to simulate the valvetrain system of the engine. An actuation test was performed based on the idle speed of a general diesel engine, and an endurance test was done based on the maximum speed. The results show minor wear of 0.002 mm. The developed test rig will be used to evaluate the actuation and durability of other valvetrain parts.

• The KIPS Transactions:PartA
• /
• v.12A no.2 s.92
• /
• pp.181-190
• /
• 2005

The development of web-based distance education surroundings is steadily achieving. However the studying on the learning effect of learners is still weak against development of educational media itself. At present, most of the distance education system is showing limits in the evaluation of the learning effect because the teaming evaluation depends on mid or final-term exams by on-line or off-line. There is a strong point that the distance education is free from space and time. One of present weak points is limitation of evaluating learner's attitude which can estimate learning effects. Earnest teaming attitude at distance education is important factor for improving the learning effects. In this paper, we propose a model for improving the teaming effects by forcing real-time evaluation and returning feedback to learners at the cyber lectures. The developed experimental system is verified its possibilities.

• Smart Media Journal
• /
• v.8 no.1
• /
• pp.43-50
• /
• 2019

As numerous devices are connected through a wireless network, there exist many studies conducted to efficiently connect the devices. While earlier studies often use clustering for efficient device management, there is a load-intensive cluster node which may lead the entire network to be unstable. In order to solve this problem, we propose a scheduling model for centralized unequal chain clustering for efficient management of sensor nodes. For the cluster configuration, this study is based on the cluster head range and the distance to the base station(BS). The main vector projection technique is used to construct clustering with concentricity where the positions of the base stations are not the same. We utilize a multiple radio access interface, multiple-input multiple-output (MIMO), for data transmission. Experiments show that cluster head energy consumption is reduced and network lifetime is improved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.3
• /
• pp.232-240
• /
• 2022

A variable vacuum capacitor (VVC), which is a variable element, is used to match impedance in plasma that changes with various impedance values, and its use is expanding with the rapid growth of the semiconductor business. Since VVCs have to secure insulation performance and vary capacitance within a compact size, electrode design and manufacturing are very important; thus, various technologies such as part design and manufacturing technology and vacuum brazing technology are required. In this study, based on the model of an advanced foreign company that is widely used for impedance matching in the manufacture of semiconductors and displays, a VVC that can realize the same performance was developed. The electrode part was designed, the consistency was confirmed through analysis, and the precision of capacitance was improved by designing a cup-type electrode to secure the concentricity of the electrode. As a result of the evaluation, all requirements was satisfied. We believe that self-development will be possible if satisfactory responses are received through evaluation by VVC consumers in the future.

• Journal of the Korean earth science society
• /
• v.28 no.3
• /
• pp.289-297
• /
• 2007

The purpose of this study was to analyze the temperament of the science gifted and to identify a relationship between temperament and test-anxiety of the students. The participants were composed of 92 middle school the science gifted who had been educated for the gifted in science educational institution of university and 97 general students in their first-year of middle school. A revised dimensions of temperament survey (DOTS-R) was used for data collection. This study revealed that the science gifted displayed higher concentricity, persistence, and approach-temperament than those of general students. On the other hand, general students were higher than the science gifted at activity, flexibility and positive mood. In the analysis of superior temperament, the science gifted were superior to general students in persistence, while general students were superior to the science gifted in flexibility. The Results of correlation with temperament and test-anxiety was as following. There was close correlation between approach-temperament and test-anxiety of the science gifted. Persistence was the same. While general students were not close correlation between concentricity and test-anxiety. Also science gifted and general students was close correlation between activity and test-anxiety. This mean that activity brings about a disturbing factor of test-anxiety. According to the results of superior temperament frequency analysis, persistence is superior temperament of the science gifted. While flexibility was superior temperament of general students. This study expects to making the use of providing appropriate teaching and learning strategies for the science gifted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.49-55
• /
• 2017

Most motor cases adopt deep drawing products, which are excellent in waterproof functions, concentricity, right angle, and quality. In addition, the blower motor and seat motor, which are installed in the car interior and do not require waterproof function, adopts a multi-forming manufacturing method. The deep drawing process requires an expensive transfer press that can digest approximately 12 processes, such as drawing, trimming and piercing. On the other hand, products can be produced with low investment because the multi-forming method is composed of one multi-forming machine or one multi-forming machine and one press. The multi-forming machine is a high-priced facility that is mostly imported and a bending / shearing process multi-foaming machine, which was developed by domestic small and medium-sized enterprises, is not enough to reduce the production cost. An integral multi - forming machine is used as a limited working method for thin material and small products. A large product and thick material has a high shear load. A large product and thick material has a high shear load and uses a single crank press. After blanking, the worker manually feeds the material to a multi-forming machine. When the bending operation is performed in the multi-forming machine, it is transferred to the press again to calibrate the dimensions. This variance in work processes has resulted in lower cost competitiveness due to the lower productivity, quality issues, and excessive operator input. The aim of this study was to establish a stable and cost - effective production system through bending / shearing process separation and facility automation.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.11 no.1
• /
• pp.7-22
• /
• 1981

A morphological and positional classification was undertaken in the transcranial and transorbital views of 174 traceable films which had been selected from those of 274 patients and previous tracing was performed. For the positional analysis, the author adopted the method which is not influenced by TMJ remodelling, and for the morphological classification, made progress the general method by adding indefinite type to four basic types. The aims of this sutudy consists in performing positional and morphological analysis of condylar head and in its morphological and positional variation in symptomatic patients. I want to express my sincere gratitude to Prof. Park, Tae Won in Seoul National University, interesting me in this field researches and for his never failing interests. I would lide to thank Prof. Ahn, Hyung Kyu and Prof. You, Dong Soo for helpful discussion and critical readings. The author is also indebted to Prof. Fuchihate Hajime in Osaka University, Prof. Uemura, Shusaburo and the late Dr. Nishihara, Heihachi for fruitful discussion and encourgements.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.225-232
• /
• 2020

In This paper examines how "Kamishibai" was used for ideological education of children during the war. "Kamishibai" was proposed by the Ministry of Education as a methodology to "cultivate children's right concentricity. In particular, , which was produced based on a true story, highlights the father's love sent to children by obtaining chocolate wrappers from comrades, and the children's envy for chocolate. Kazuo's interview, saying, "I will succeed my father," showed that he has a continuous personality that comes with another sacrifice. After the Sino-Japanese War, the war situation intensified, and in 1940, a new edict decided to enact the "Army Support Corps". This is a measure to select eligible youth applicants from 15 to 17 years of age, after training for 4 years, and then appoint them to aviation soldiers and sergeants. This is a legal maintenance that can be put into the battlefield at any time according to the trend of the war. Just as Kazuo, a real character in "Chocolate and Soldiers", also became a "boy flight soldier" after his father's death, flying airplanes to boys at the time was also a dream that Japan's great citizens should have. In the , it is suggested that "the father enshrined in Yasukuni" is a great person, and that "I" will also grow and become a "good citizen". In particular, the two brothers in the work show the value of eternal sacrifices in Yasukuni as a typical model of the "great people".