• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.250.2-250.2
• /
• 2014

Currently, teeth whitening method which is applicable to dental surgery is that physician expertises give medical treatment to teeth directly dealed with a high concentration of hydrogen peroxide and carbamide peroxide. If hydrogen peroxide concentration is too high for treatment of maximized teeth whitening effect [1], it is harmful to the human body [2]. To the maximum effective and no harmful teeth whitening effect in a short period of time at home, we have observed the whitening effect using carbamide peroxide (15%) and a low-temperature atmospheric pressure plasma jet which is regulated by the Food and Drug Administration. The gas supplied conditions of the non-thermal atmospheric pressure plasma jet was with the humidified (0.6%) gas in nitrogen or air at gas flow rate of 1000 sccm. Also, the measurement of chemical species from the jet was carried out using the optical emission spectroscopy (OES), the evidence of increased reactive oxygen species compared to non-humidified plasma jet. We have found that the whitening effect of the plasma is very excellent through this experiment, when bovine teeth are treated in carbamide peroxide (15%) and water vapor (0.2 to 1%). The brightness of whitening teeth was increased up to 2 times longer in the CIE chromaticity coordinates. The colorimetric spectrometer (CM-3500d) can measure color degree of whitening effect.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.1
• /
• pp.43-51
• /
• 2009

The cotton, wool, cotton/wool blended(80:20) and tencel fabrics were treated with low temperature oxygen or argon plasma, enzymes(cellulase or protease), or oxygen plasma-enzyme and examined for their weight loss and conditions for treatment for the environment friendly finishing. In the plasma treatment argon gas had better effect on the weight loss than oxygen gas did and the weight loss of all the fabrics was increased as increasing discharge power and discharge time. The weight loss of cotton, wool, cotton/wool blended(80:20) fabrics decreased in a large measure after 1 hr but that of tencel didn't decrease after 1 hr. In case of cellulose fibers oxygen gas plasma induced chemical functional groups on the surface of substrate more than argon gas plasma did so the weight loss of wool was larger than that of cotton, tencel fabrics in oxygen plasma-enzyme treatment. The weight loss of cotton and tencel fabrics decreased the initial stage because oxygen plasma pre-treatment caused cross linking as well as etching effect but argon plasma pre-treatment didn't. The plasma pre-treatment cleared the way for enzyme treatment on the whole but oxygen plasma pre-treatment bear in hand the increase of weight loss more or less because of the cross linking on the surface of cellulose fibers. The appropriate conditions for plasma treatment was 10-1Torr, 40W for 30minutes and for cellulase treatment were enzyme concentration of $3g/{\ell}$, pH 5, $60^{\circ}C$ for 1hr and for protease treatment were enzyme concentration of $4g/{\ell}$ pH 8, $60^{\circ}C$ for 1hr.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.4
• /
• pp.137-147
• /
• 2013

Most of livestock houses are concentrated in certain area with mass rearing system resulting in rapid spread of infectious diseases such as HPAI (highly pathogenic avian influenza). The livestock-related vehicles which frequently travel between farms could be a major factor for disease spread by means of transmission of airborne aerosol including pathogens. This study was focused on the quantitative measurement of aerosol concentration by field experiment while vehicles were passing through the road. The TSP (total suspended particle) and PM10 (particle matter) were measured using air sampler with teflon filter installed downward the road with consideration of weather forecast and the direction of road. And aerosol spectrometer and video recorders were also used to measure the real-time distribution of aerosol concentration by its size. The results showed that PM2.5 was not considerable for transmission of airborne aerosol from the livestock-related vehicle. The mass generated from the road during the vehicle movement was measured and calculated to 241.4 ${\mu}g/m^3$ by means of the difference between TSP and PM2.5. The dispersion distance was predicted by 79.6 m from the trend curve.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.3
• /
• pp.482-488
• /
• 2011

Cadmium (Cd) is well known as a spermatotoxic and gonadotoxic heavy metal ion. This study was performed to assess the possible protective effect of Enerbalance on Cd-induced spermiotoxicity and testicular damage. The control group received isotonic saline; Cd group received Cd (2 mg/kg BW per day) orally; extract-treated groups were orally administrated with Enerbalance (50 mg and 100 mg/kg BW per day) and Cd for 10 days. Morphological changes of testicular tissue, sperm characteristics, oxidative/antioxidative parameters from testis, and serum sexual hormone level were determined. Enerbalance was significantely increased sperm amount in cauda epididymis without changes of ratio of epididymis/body weight and testis/body weight. Cd caused a marked decrease in epididymal sperm concentration and chemotactic sperm motility, testicular superoxide dismutase (SOD), catalase (CAT), Enerbalance was significantly ameliorated loss of epididymal sperm concentration, sperm chemotactic motility, antioxidative parameters, and male hormone whereas decreased abnormal architecture by testis damage. Enerbalance was successfully attenuated these adverse effects of Cd and offers a dose-dependent protection. Our study demonstrated that Enerbalance could proffer a measure of protection against Cd-induced testicular damage and spermiotoxicity by possibly reducing oxidative stress and increasing the antioxidant defense mechanism in mice.

• Journal of Veterinary Clinics
• /
• v.37 no.2
• /
• pp.61-66
• /
• 2020

Nickel is a nutritionally essential trace element that plays an important role in the immune system of several animal species. The aim of this study was to examine the effect of nickel chloride on chemotactic activity of peripheral blood polymorphonuclear cells (PMNs) and whether this effect is associated with interleukin (IL)-8 and a nuclear factor-kappa B (NF-κB)-dependent pathway. Peripheral blood mononuclear cells (PBMCs) and PMNs were isolated by Percoll solution (Specific gravity; 1.080) and 1.5% dextran treatment, respectively. A modified Boyden chamber assay was used to measure the chemotactic activity of PMNs. The level of IL-8 in culture supernatant from PBMCs was measured by enzyme-linked immunosorbent assay (ELISA). Both of PBMCs and PMNs exhibited a low viability when cultured with concentration of greater than 1,000 μM of nickel chloride for 24 h. Thus, nickel chloride was used at concentration of 500 μM, which preserved cell viability. Treatment with nickel did not directly affect the chemotactic activity of PMNs. However, the chemotactic activity of PMNs was remarkably increased by culture supernatant from PBMCs treated with nickel chloride (500 μM) for 24 h. Recombinant porcine IL-8 polyclonal antibody (pAb) neutralized the enhancing effect on the chemotactic activity of PMNs by culture supernatant from PBMCs treated with nickel and this culture supernatant had higher IL-8 levels than the culture supernatant from untreated PBMCs. In addition, n-tosyll-phenylalanine chloromethyl ketone (TPCK), a NF-κB inhibitor, antagonized the enhancing effect on the chemotactic activity of PMNs by the culture supernatant from PBMCs treated with nickel. These results suggested that nickel stimulates porcine PBMCs to produce IL-8, which increases the chemotaxis of PMNs via NF-κB-dependent pathway.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.345-351
• /
• 2010

The oblique incidence technique for ultrasonic nonlinear characterization was studied in stainless steel 316L alloy subjected to high cycle fatigue. A dog-bone plate specimen was prepared to make different faitgue-driven deformation at each position where the stress concentration could occur in the middle of specimen. In addition to the normal transmission technique, the oblique incidence technique which is newly suggested in this study, was used to measure ultrasonic nonlinear parameter. The fatigued specimen shows higher ultrasonic nonlinear parameter than the virgin specimen for both techniques. Ultrasonic nonlinear parameter highly increases in the middle of test specimen where the stress concentration existes. Relative nonlinear parameter has strong correlation with fatigue damage. Consequently, the oblique incidence technique with longitudinal wave can be potential to characterize high cycle fatigue damage.

• Water for future
• /
• v.29 no.2
• /
• pp.129-141
• /
• 1996

A procedure for computing total suspended sediment load is presented based on a single point-integrated sample, a power velocity distribution, and Laursen's sediment concentration distribution equation. The procedure was tested with field data from the Rio Grande River. Computed concentrations agreed well with depth-integrated measurements corrected for unmeasured load using nominal values of $\beta$, $\kappa$ and w. Even better agreement was obtained when site-specific data were used to define the x and z exponents of the velocity and concentration distributions. The difference between total suspended load computed using a single measurement and this procedure and conventional computations based on depthintegrated measurements is well within sampling error. There are major advantages in estimating total suspended load using a single time-integrated suspended-sediment point sample. Less field time is required; sampling costs are greatly reduced; and sampling can be more frequent and better timed to measure the changing sediment load. Single-point sampling makes automatic sampling procedures more feasible.

• Korean Journal of Materials Research
• /
• v.12 no.4
• /
• pp.269-273
• /
• 2002

The NASICON solid electrolyte films, $Na_{1+x}Zr_2Si_xP_{3-x}O_{12}$(1.5< x < 2.3), was prepared from ceramic slurry by modified doctor-blade process. The NASICON solid electrolyte and fabricated sensors, Pt-electrode/NASICON/Carbonate$(Na_2CO_3-K_2CO_3CaCO_3\; system)$ electrode, were investigated to measure phase, microstructure and e.m.f variation for sensing $CO_2$ concentration. The uniform grain size of $2-4{\mu}m$ and major phase of sodium zirconium silicon phosphate phase, $Na_{1+x}Zr_2Si_xP_{3-x}O_{12}$was identified with X-ray diffraction patterns and scanning electron microscopy, respectively. The Nernst's slope of 84 mV/decade for $CO_2$ concentration from 500 to 8000 ppm was obtained at operating temperature of $400^{\circ}C$.

• Health Policy and Management
• /
• v.22 no.1
• /
• pp.85-108
• /
• 2012

One of the ways to achieve the principle of equal access for equal needs, availability and geographical accessibility of health care resources regardless of resident sites is important. The purpose of this paper is to measure socioeconomic inequities in distribution of health care resources among regions in the Republic of Korea (hereafter Korea). Data were extracted from regional statistics of National Health Insurance, Community Health Survey, Korea Social Science Data Archive, and Korean Statistical Information Services at the same period of 2009. The dependent variables were the number of health workforce and health care facilities in each region. The proxy indicator of regional socioeconomic status was local tax per person. To identify whether inequalities among regions, we examined the concentration index(CI) and indirectly standardized CI by controlling each region's demographics and need factors. Total observations were 232 districts in nationwide, and we analyzed separately Seoul(25 districts) and non-Seoul areas(207 districts). The standardized CI values of health care resources were positive(favoring the rich region) across the nation in almost all kinds of resources. Especially the number of specialist, dentist, dental clinics, clinics, oriental medical clinics, pharmacists, and pharmacies were statistically significantly favoring the rich region. But the CI for the number of long-term care hospitals, public health centers were negative(favoring the poor region). The tendency of CI presenting positive values were increased in Seoul area. But in the case of non-Seoul, the CI indexes were nearly zero. The results suggest that except the Seoul area, little regional socioeconomic-related inequalities were observed in the distribution of health care resources in Korea.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.93-100
• /
• 2014

Steel reinforcement buried in concrete structure in submerged zone does not easily become corroded due to lack of dissolved oxygen. For that reason, accelerated corrosion test in submerged state is performed with an electrochemical method, which is not suitable for actual corrosion mechanism and makes it difficult to find relevance with long-term behavior. In this study, accelerated corrosion test was performed with the temperature and chloride concentration as main variables in order to establish a method for accelerated corrosion test in submerged zone. Corrosion was determined by the result of reinforcement corrosion monitoring based on galvanic potential measurement and half-cell potential method. The accelerated corrosion test result showed that temperature had the most dominant influence. To determine the chloride content, chloride concentration by depth in the test sample was measured. With the same conditions, chloride penetration interpretation was performed by DuCOM, a FEM durability interpretation program. Also, a test was performed to measure dissolved oxygen according to soaking conditions of artificial seawater, which was used for verifying the validity of the accelerated corrosion test result.