• Journal of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.317-324
• /
• 1969

Isopolytungstic acid and it's salts, which are formed in sodium tungstate solutions, when acidified with perchloric acid, have been investigated by cryoscopic method. The results obtained are summarized as follows; It was not possible to measure the molecular weight of sodium isopolytungstates which are salthydrates, by means of cryoscopic method. Regardless of the concentration of solution, paratungstate and acid hexatungstate are formed at $H^+/WO_4^{2-}$ ratio of 1.15 and 1.50. It has been shown that isopolytungstic acid and it's salts are also formed at $H^+/WO_4^{2-}$ ratio of 1.30 and 1.90 and in highly concentrated solutions at 1.40 and 1.65.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.82-87
• /
• 1996

An optimized method for determining beta-emitting $^{241}$ Pu in the presence of alpha-emitting nuclides was developed using a liquid scintillation counting system. PSA-level was setting using pulse-shape discrimination. The $^{241}$ Pu counting channel was adjusted for maximum value of FM using the $^{241}$ Pu standard source. The volume of scintillant was determined for the maximum value of counting efficiency. The optimized method of $^{241}$ Pu has been applied to environmental samples to measure concentration of $^{241}$ Pu in soils and mosses. Also it has been identified the origin of Pu deposited in Korea from the activity ratio $^{241}$ Pu / $^{239,240}$Pu.

• Molecules and Cells
• /
• v.26 no.1
• /
• pp.87-92
• /
• 2008

We employed dual color Fluorescence Cross Correlation Spectroscopy (FCCS) to measure the interaction between PKA regulatory (RII) and catalytic subunits (CAT) in living cells. Elevation of intracellular cAMP with forskolin decreased the cross-correlation amplitude between RFP-fused RII (RII -mRFP) and GFP-fused CAT (CAT-EGFP) by 50%, indicating that cAMP elevation leads to dissociation of RII-CAT complexes. Moreover, diffusion coefficient analysis showed that the diffusion rate of CAT-EGFP was significantly increased, suggesting that the decreased RII-CAT association caused by cAMP generated free CAT subunits. Our study demonstrates that in vivo FCCS measurements and their quantitative analysis permit one not only to directly quantify protein-protein interactions but also to estimate changes in the intracellular cAMP concentration.

• Membrane Journal
• /
• v.9 no.2
• /
• pp.126-131
• /
• 1999

Diagnostic membranes by using multi-layered gelatin films were prepared to measure blood glucose level of diabetics. Maximum diffusion rates through multi-layered gelatin film were measured at various concentration of glucose in plasma or blood. The effects of storage temperatures on the diffusion rates of glucose were studied after storage of 3 days, 2 weeks and 4 weeks at various temperatures. The stabilities of diagonostic membranes with multi-layered gelation films were examined at RH 80%.

• Journal of Surface Science and Engineering
• /
• v.16 no.2
• /
• pp.41-47
• /
• 1983

An investigation has been performed on the effects of temperature and Ni addition on the wetting behaviour of Cu on W substrate in hydrogen atmosphere. An sessile drop method was used to measure a wetting angle. The concentration profiles of W, Cu and Ni elements in W/Cu - 5 Ni specimen were made by EPMA. With increasing temperature, the wetting angle of Cu droplet on W plate decreases and the time to reach an equilibrium wetting angle is shortened in hydrogen atmosphere. The addition of Ni improves appreciably the wettability of Cu on W. With increasing Ni content in Cu liquid droplet(0, 1, 3, 5%), the wetting angle is decreased from 21$^{\circ}$to 0$^{\circ}$.

• Journal of Ship and Ocean Technology
• /
• v.9 no.1
• /
• pp.27-37
• /
• 2005

An experimental study has been carried out as a basic research for the development of the friction drag reduction technology for water-borne vehicles by injecting microbubbles or polymer solution. Experimental apparatus and procedures have been devised and prepared to measure the changes of the wall friction with the injection of additives and the basic experimental data on friction drag reduction are obtained for fully developed channel flows. The effects of key controlling parameters were investigated for higher drag reduction with varying the concentration and the injection rate of additives. The frictional drag has been reduced up to $25\%$ with the microbubble injection and $50\%$ with the polymer solution injection.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.22-27
• /
• 2004

An orthotropic steel deck system is widely adapted form for a long-span bridge. It has many advantages, such as the big reduction of dead weight, the simplicity for erection, and the reduction of the construction period. However, an orthotropic steel deck system requires a lot of welding work, which may result in defects and deformation of connection. Therefore, the research for the general behavior and fatigue strength of the several details in orthotropic steel deck bridge is necessary. The fatigue failure with distortion results from secondary stress by out-of-plane deformation; these kinds of cracks are very difficult to measure, and can not be precisely calculated through finite element analysis. This stress concentration phenomenon generates the fatigue failure around the lower scallop of the transverse rib. This paper presents improved details of the intersection between the longitudinal rib and the transverse rib of an orthotropic steel deck bridge by the third dimensional hit size test, and the finite element method, which can minimize local stress through parametric study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.142-145
• /
• 1999

We confirm that when A-type zeolite supporting silver lone is placed in ion-exchanged distilled water, silver ions is eluted and eluted silver ions generates hydroxyl-radical (.OH) and hydro-radical (.H) continuously, the amount of those is proportion to the silver-ion concentration. Hydroxyl-radical is not generated by super-oxide anion-radical (.O2) but by directly dissolved water. To know such a above discussed mechanism, we prepare A-type zeolite supporting silver ions, and measure the amount of the eluted silver tons by atomic absorption spectroscopy and the generated radical by ESR The radical generated by A-type zeolite supporting silver ions is discussed in the application of elecrical and electronic materials.

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.1024-1029
• /
• 2011

PVA/silica hybrid xerogels were synthesized by sonohydrolysis of a mixture of 2-way catalyzed TEOS and water solution of PVA. PVA was successfully removed from the xerogels through calcination and its removal was confirmed through TGA analysis of the calcined gel. Microstructure of the gels was studied through SEM, XRD and FTIR. Nitrogen sorption studies were conducted to find out surface area of different samples. It was found out that the samples having PVA removed through calcinations have higher surface area (411.64 $m^2$/g) than the samples (353.544 $m^2$/g) synthesized without any PVA. Adsorption properties of these xerogels synthesized by using different ratios of components were studied by taking Rhodamine G6 as a model adsorbate. The experiments were conducted at room temperature ($25^{\circ}C$). UV visible spectroscopy was used to measure the concentration of the dye before and after adsorption. The adsorption data of Rhodamine G6 on PVA modified silica is described by the Freundlich's adsorption model.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.197-201
• /
• 2001

Measuring of the dissolved oxygen is widely used for the environmental control of natural waters, sewage waste treatment, medical and biochemical studies, soil husbandry, food and drug process control, and prevention of corrosion in boilers. Especially, a power plants need special management for preventing accidents from corrosion, therefore, it is essential to measure the concentration of dissolved oxygen in real-time. In this paper we present a method of measuring dissolved oxygen very accurately up to ppb units. This method, called polarographic method, is based on the measures of the electric current generated by the oxidation process in cathode and de-oxidation process in anode, assuming that the amount of the current is proportional to the density of dissolved oxygen.