• 공연문화연구
• /
• 제33호
• /
• pp.97-128
• /
• 2016

본산대놀이계통 가면극들을 장면별로 구분해서 음악 구성을 살펴본 바에 따르면, 처음에 배치되는 제의적 성격을 지니는 벽사춤 장면에서는 <염불>이나 <느린굿거리>가 포함되는 기악곡이 연주된다. 가면극의 마지막에 배치되는 할미와 영감 장면에서는 기악곡으로 <굿거리>가 연주되고, 성악곡으로 <상여소리> 또는 <무가>가 불린다. 이 때 <상여소리> 또는 <무가>는 할미가 죽어서 굿을 하거나 상여를 메고 나가는 제의적인 성격의 장면에서 연주된다. 다음으로 중 장면, 양반과 말뚝이 장면, 할미와 영감 장면에서는 노승이 추는 춤의 반주음악으로 <염불>이 연주되고, 중이 부르는 노래와 취발이가 부르는 노래, 양반 또는 말뚝이가 추는 춤과 할미가 추는 춤의 반주 음악인 <굿거리>와 이들이 부르는 노래, 영감과 할미가 부르는 노래가 나오는데, 이들의 배치 순서는 유동적이다. 이렇게 가면극의 장면 배치가 유동적인 것은 음악 구성과 관련된 가면극의 구조 때문이다. 가면극의 구조는 성악곡이 등장하는 과장이 극 전체에 분산 배치되는 구조와 성악곡이 등장하는 과장이 후반에 집중 배치되는 구조로 구분해서 볼 수 있다. 즉 가면극의 구조는 앞에서도 언급했듯이, 서로 관련 없는 주제들로 이루어진 과장이 다시 모여진 형태로 알려져 있다. 이러한 과장들의 배치를 어떻게 할 것인가에 관해서 각 과장에 어떤 음악이 포함되는지의 여부도 영향을 준 것으로 보인다. 관객을 긴장 또는 이완시키고, 흥을 이끌어 내거나 슬픔을 자극하기 위해서 적절한 음악의 배치는 필수적인 요소이다. 이러한 음악의 배치는 각 가면극별로 공통된 장면에서 공통되기도 하고 그렇지 않기도 하다. 양주별산대놀이, 봉산탈춤 등에서 불리는 <백구타령>과 <오독도기>가 수영야류에서도 반경토리로 불리는 예처럼 가면극의 전파 경로에 따라 동일 장면에서 연주되는 음악 역시 전파되었을 것이나 각 가면극 연희자의 음악적 역량이나 공연 환경 등에 따라 변형되거나 대체되고, 또는 생략되기도 했다. 그에 따라 동일한 내용의 과장이지만 이에 포함되는 음악의 유무, 그리고 그 음악의 성격이 달라졌을 것이다. 이는 가면극별로 동일한 내용의 과장이 음악적 효과의 포함 여부에 따라 서로 다른 순서로 배치되도록 영향을 주었을 것이다.

• 대한치과보철학회지
• /
• 제33권2호
• /
• pp.241-268
• /
• 1995

Splint therapy, the immobilization of teeth, has been done for patient's masticatory comforts and an adjunctive aid in periodontal therapy. Mandibular premolars are frequently splinted in many distal extension removable partial denture cases. But splinting is an extensive restoration that may not be conservative of tooth structure and may prove to be quite costly to the patient. The two dimensional finite element analysis method was used to determine the magnitude and mode of distribution of the stresses of the periodontal ligament and supporting alveolar bone when abutments with different periodontal supports were splinted and distal-extension removable partial denture was subjected to different loading schemes. The results were as follows : 1. When abutments were splinted, stresses moved from apico-distal to apico-mesial of terminal abutment on a vertical force and from disto-alveolar crest to apex on a distally directed force. But stresses were generally diminished on a mesially directed force. 2. As vertical bone loss was proceeding, most of stresses were transmitted to residual ridge and the rest of stresses were concentrated on apex of distal abutment. But these apical stresses were minimized when abutments were splinted. 3. As mesially inclined bone loss was proceeding, it seemed to be dangerous that many stresses were concentrated on the distal alveolar crest, especially in the distally directed load case. Abutments splinting decreased the alveolar crestal stresses but not enough. 4. For all vertical stresses were effectively decreased on splinting, stresses were concentrated as highly on apico-mesial area of distal abutment in distally directed load cases as the distal inclination of bone level was severe. 5. The directions and magnitudes of abutment movements were decreased with teeth splinting.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1067-1072
• /
• 2012

현재 선형 전동기는 많은 연구가 진행되어 그 응용분야가 산업전반에 확대되고 있다. 이중 반송장치 분야에서 영구자석 선형 동기 전동기(Permanent Magnet Linear Synchronous Motor:이하 PMLSM)가 각광을 받고 있다. 영구자석 선형 동기 전동기는 구조적으로 간단하며 고속화 고추력화 등의 장점을 가지고 있지만 전기자를 반송경로 전장에 배치하는 지상 1차측 시스템을 장거리 반송장치에 적용하면 재료비용의 증가 및 제작시간 증가 등의 문제점이 발생한다. 따라서 전기자를 분산(불연속) 배치하는 방식이 제안되고 있다. 하지만 이러한 전기자 분산배치 방식은 구조적으로 단부가 존재하고 이러한 단부에 의해 코깅력이 발생한다. 이는 추력 맥동의 원인이 되며, 소음과 진동을 발생시킨다. 따라서, 본 연구에서는 전기자를 분산배치 할 경우 필연적으로 생기는 단부에 의한 코깅력을 저감하기 위해 Bifurcating을 적용한 집중권 PMLSM에 보조극 설치법을 제안한다. 또한 그에 따른 단부 코깅력 특성을 2차원 유한요소법(FEA)을 이용하여 분석하였다.

• Korea-Australia Rheology Journal
• /
• 제14권3호
• /
• pp.129-138
• /
• 2002

A cationic surfactant, cetyltrimethylammonium $\rho$-toluenesufonate (CTA$\rho$TS), forms long threadlike micelles in aqueous solution. The threadlike micelles make concentrated entanglement networks, so that the solution shows pronounced viscoelastic behavior as concentrated polymer systems do. However, a mechanism for a process responsible for the longest relaxation time of the threadlike micellar system is different from that of semi-dilute to concentrated polymer systems. The threadlike micellar system exhibits unique viscoelasticity described by a Maxwell model. The longest relaxation time of the threadlike micellar system is not a function of the concentration of CTA$\rho$TS, but changes with that of $\rho$-toluenesufonate ($\rho$$TS^{-}$) ions in the bulk aqueous phase supplied by adding sodium $\rho$-toluenesulfonate (NapTS). The rates of molecular motions in the threadlike micelles are not influenced by the concentration of $\rho$$TS^{-}$ anions, therefore, molecular motions in the threadlike micelles (micro-dynamics) are independent of the longest relaxation mechanism (macro-dynamics). A nonionic surfactant, oleyldimethylamineoxide (ODAO), forms long threadlike micelles in aqueous solution without any additives. The aqueous threadlike micellar system of ODAO also shows Maxwell type viscoelastic behavior. However, the relaxation mechanism for the longest relaxation process in the system should be different from that in the threadlike micellar systems of CTA$\rho$TS, since the system of ODAO does not contain additive anions. Because increase in the average degree of protonation of head groups of ODAO molecules in micelles due to adding hydrogen bromide causes the relaxation time remarkably longer, changes in micro-structure and micro-dynamics in the threadlike micelle are closely related to macro-dynamics in contrast with the threadlike micellar system of CTA$\rho$TS.

• Computers and Concrete
• /
• 제29권 6호
• /
• pp.375-391
• /
• 2022

This paper examined the impact of the cross-sectional structure on the structural results under different loading conditions of reinforced concrete (RC) members' management limited in Carbon Fiber Reinforced Polymers (CFRP). The mechanical properties of CFRC was investigated, then, totally 32 samples were examined. Test parameters included the cross-sectional shape as square, rectangular and circular with two various aspect rates and loading statues. The loading involved concentrated loading, eccentric loading with a ratio of 0.46 to 0.6 and pure bending. The results of the test revealed that the CFRP increased ductility and load during concentrated processing. A cross sectional shape from 23 to 44 percent was increased in load capacity and from 250 to 350 percent increase in axial deformation in rectangular and circular sections respectively, affecting greatly the accomplishment of load capacity and ductility of the concentrated members. Two Artificial Intelligence Models as Extreme Learning Machine (ELM) and Particle Swarm Optimization (PSO) were used to estimating the tensile and flexural strength of specimen. On the basis of the performance from RMSE and RSQR, C-Shape CFRC was greater tensile and flexural strength than any other FRP composite design. Because of the mechanical anchorage into the matrix, C-shaped CFRCC was noted to have greater fiber-matrix interfacial adhesive strength. However, with the increase of the aspect ratio and fiber volume fraction, the compressive strength of CFRCC was reduced. This possibly was due to the fact that during the blending of each fiber, the volume of air input was increased. In addition, by adding silica fumed to composites, the tensile and flexural strength of CFRCC is greatly improved.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권7호
• /
• pp.1053-1060
• /
• 2015

In this study, the optimal operation factors for struvite crystallization for removing and recovering nitrogen and phosphorus from anaerobic digestive fluid of swine manure containing highly concentrated nitrogen was determined. Every experiment for the struvite crystallization reaction was conducted by placing 1,000 mL of digestion fluid in a 2,000 mL Erlenmeyer flask at various temperatures, pH, and mixing speed. Except for special circumstances, the digestion fluid was centrifuged (10,000 rpm, 10 min) and then the supernatant was used for the experiment at room temperature and 100 rpm. The optimal mole ratio of $PO_4{^{3-}}:Mg^{2+}$ was 1:1.5, and the pH effect ranging from 9 to 11 was similar, when mixed for 1 hour. Under this condition, the removal efficiency of $NH_4{^+}-N$ and $PO_4{^{3-}}-P$ was 40% and 88.6%, respectively. X-shaped crystal was observed by light and scanning electron microscopy. In addition, struvite crystal structure was confirmed through X-ray diffraction analysis.

• Structural Engineering and Mechanics
• /
• 제47권2호
• /
• pp.149-166
• /
• 2013

Flexible behaviors in new aerospace structures can lead to a degradation of their control and guidance system and undesired performance. The objectives of the current work are to analyze the vibration resulting from the propulsion force on a Single Stage to Orbit (SSTO) launch vehicle (LV). This is modeled as a follower force on a free-free Euler-Bernoulli beam consisting of two concentrated masses at the two free ends. Once the effects on the oscillation of the actuators are studied, a solution to reduce these oscillations will also be developed. To pursue this goal, the stability of the beam model is studied using Ritz method. It is determined that the transverse and rotary inertia of the concentrated masses cause a change in the critical follower force. A new dynamic model and an adaptive control system for an SSTO LV have been developed that allow the aerospace structure to run on its maximum bearable propulsion force with the optimum effects on the oscillation of its actuators. Simulation results show that such a control model provides an effective way to reduce the undesirable oscillations of the actuators.

• 한국공간구조학회논문집
• /
• 제15권2호
• /
• pp.51-59
• /
• 2015

In this study, a shape design and an analysis considering structural stability were investigated to develop an icosahedron-based hemispherical modular dome. To design this modular dome, a program that can perform icosahedron shape modeling, modularization of joint connection members, and the analysis of structural stability was developed. Furthermore, based on the adopted numerical model, the eigen buckling mode, unstable behavior characteristics according to load vector, and the critical buckling load of the modular dome under uniformly distributed load and concentrated load were analyzed, and the resistance capacities of the structure according to different load vectors were compared. The analysis results for the modular dome suggest that the developed program can perform joint modeling for shape design as well as modular member design, and adequately expressed the nonlinear behaviors of structured according to load conditions. The critical buckling load results also correctly reflected the characteristics of the load conditions. The uniformly distributed load was more advantageous to the structural stability than concentrated load.

• 대한치과보철학회지
• /
• 제34권4호
• /
• pp.780-790
• /
• 1996

The endodontically treated tooth is generally restored with post and core, owing to the brittleness and the loss of large amount of tooth structure. Although there have been lots of studies about the endodontically treated teeth, the three-dimensional quantitative studies about the stress distribution of them are in rare cases. In this study, it was assumed that the coronal portion of the upper incisor had extensively damaged. After the root canal therapy it was post cored, and restored with PFG crown. The three-dimensional model, in which the root was supported with a normal alveolar bone, was constructed. Force was applied to the centric stop point with the angle of 135 degrees to the long axis of the tooth. Force was assumed to be 250N as functional maximum bite force of upper central incisors. The results analyzed with three-dimensional finite element method were as follows : 1. Stress was concentrated on the middle portion of the labial side dentin and the apical portion of the dentin. 2. Stress in the post was more concentrated on the post apex. 3. The displacement of the post at the post-cement interface was almost symmetrical la-bio-lingually. 4. It assumed that restoring extensively damaged tooth with a post-core and PFG crown is an adequate method of restoration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.773-774
• /
• 2006

Nowadays, the global interests are concentrated on the preserving of the clean environment, and the diminishing of the dependence on the fossil energy, and among the possible alternative energies, the wind turbine generating system is considered to be the best suited to produce high efficiency energy, without affecting the natural environment. The permanent magnet generators were been used for the wind power generating, for long time, with continuous efforts to improve the generating efficiency. And the latest trend on it is to develop an AFPM(Axial Flux Permanent Magnet)type, which is composed in the structure of rotor and stator shaped in the disc forms, and the direction of the flux at the air gap runs in parallel to the shaft. This thesis is on the study concerning with the analysis of the characteristics of the 5 kW at 300rpm direct drive AFPM generator which is suitable for the small scale wind turbine generating system. In it, the Electro-magnetically Coreless AFPM was been analyzed, the prototype generators been made, concentrated on interpreting the characteristics of the power output, and verifying it through the theoretical study and practical tests.