• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.351-351
• /
• 2011

최근 지구온난화와 더불어 이상기후가 대두됨에 따라 기상 예측이 더욱더 중요시되고 있다. 또한 이전부터 가뭄 및 홍수와 같은 기상현상으로 인한 피해 사례가 빈번하였으며, 이로 인하여 물 관리의 어려움을 겪고 있다. 한 예로 이상기후가 유난히 잦았던 2010년 여름철 경우 평년보다 발달한 북태평양고기압의 영향으로 여름철 92일 가운데 81일의 전국 평균기온이 평년보다 높게 나타났다. 또한 강우 일수가 평년에 비해 7.4일 많은 44.2일을 기록하였으며, 국지성 집중호우 사례가 빈번하였다. 또한 8월 9일 발생한 태풍 `뎬무'를 포함해서 한 달 동안 3개의 태풍이 한반도에 영향을 끼치는 이례적인 사례가 발생하였다. 따라서 본 연구는 이러한 기상재해에 따른 물 관리를 장기적으로 대비하고자 고해상도 전지구 모델 GME를 이용하여 2010년 여름철 강수 예측을 실시하였다. 강수 예측에 사용된 전지구 모델 GME는 기존의 카테시안 격자체계를 가진 모델과 달리 전구를 삼각형으로 구성된 20면체로 격자화 한 Icosahedral-hexagonal grid 격자체계로 구성되어 있어, 해상도 증가에 용이할 뿐만 아니라, HPC(High Performance Computing)환경에서 효율성이 높은 장점을 가지고 있다. 본 계절 예측을 수행함에 있어 발생하는 잡음을 최소화하고자, Time-lag 기법을 이용하여 5개의 앙상블 멤버로 구성되어있으며, 이를 비교 분석하기위해 Climatology를 이용하여 총 10개의 앙상블 멤버로 규준실험을 수행하였다. 선행 연구에 따르면 1개월 이상의 장기 적분의 경우 초기조건보다 외부 강제력이 더 중요한 역할을 한다고 연구된 바 있다. (Yang et al., 1998) 특히 계절 변동성의 경우 대기-해양간의 상호작용에 의해 지배되며, 이를 고려하여 본 연구는 해수면 온도를 경계 자료로 사용하여 계절 예측을 수행하였다. 앞서 말한 실험 계획을 바탕으로 하여 나온 결과를 통해 동아시아지역 및 한반도 도별 강수 및 온도 변수에 대해 순별 및 월별 카테고리맵 분석을 실시하여 한눈에 보기 쉽게 나타냈다. 또한 주요 도시별 강수량 및 온도의 시계열 분석을 실시하여 시간이 지남에 따라 나타나는 변동성을 확인하였다. 계절 예측 결과에서 온도의 경우 평년보다 높게 나타났으며, 이는 실제 온도 예측과도 유사한 패턴을 가졌다, 강수의 경우 7월부터 8월 중순까지 평년보다 다소 적게 모의되었으며, 8월 하순경 회복하는 것으로 예측하였다. 따라서 본 계절 강수 예측은 다소 역학 모델이 가지는 한계를 가지고 있으나, 실제와 비교하여 어느 정도의 경향성이나 패턴에 있어 유사성을 보임을 확인하였으며, 이를 장기적 차원의 물관리를 함에 있어 참고 및 활용 가능할 것으로 예상한다.

• Journal of Korea Water Resources Association
• /
• v.30 no.1
• /
• pp.83-93
• /
• 1997

The purpose of the study is to analyze the sensitivity of the parameters that affect the runoff and water quality in the studied drainage basins. SWMM model is applied to the four drainage basins located at Namgazwa and Sanbon in Seoul and Gray Haven and Kings Creek in the USA. first of all, the optimum values of the parameters which have least simulation error to the observed data, are detected by iteration procedure. These are used as the standard values which are compared against the procedure. These are used as the standard values which are compared against the varied parameter values. In order to catch the effectiveness of the parameters to the computing result, the parameters are changed step by setp, and the results are compared to the standard results in flowerate and quality of the sewer. The study indicates that the discharge is greatly affected by the types of runoff surface, i.e., impervious area remarkably affects the peak flow and runoff volume while the surface storage affects the runoff volume at mild sloped basins. In addition, the major parameters affecting the pollution concentrations and loadings are the contaminant accumulation coefficient per unit area per time and the continuous dry weather days. Furthermore, the factors that affect the water quality during the initial rainfall period are the rainfall intensity, transport capacity coefficient and its power coefficient. Consequently, in order to simulate the runoff-water quality, it is needed to evaluate previous data in the research performed for the studied basins. To accurately estimated from the tributary areas and the rational computation methods of the pollutants calculation should be introduced.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.3
• /
• pp.184-193
• /
• 2010

This paper proposes a biological iridescence BRDF(Bidirectional Reflectance Distribution Function) compression and rendering method. In the graphics technology, iridescence sometimes is named structure colors. The main features of these symptoms are shown transform of color and brightness by varying viewpoint. Graphics technology to render this is the BRDF technology. The BRDF methods enable realistic representation of varying view direction, but it requires a lot of computing power because of large data. In this paper, we obtain reflection map from iridescence BRDF, analyze color of reflection map and propose representation method by several colorfully concentric circle. The one concentric circle represents beam width of reflection ray by one normal vector. In this paper, we synthesize rough concentric by using several virtually optical normal vectors. And we obtain spectrum information from concentric circles passing through the center point. The proposed method enables IBR(image based rendering) technique which results is realistic illuminance and spectrum distribution by one texture from reduced BRDF data within spectrum.

• Radiation Oncology Journal
• /
• v.27 no.4
• /
• pp.240-248
• /
• 2009

Purpose: To provide a simple research tool that may be used to analyze a dose volume histogram from different radiation therapy planning systems for NTCP (Normal Tissue Complication Probability), OED (Organ Equivalent Dose) and so on. Materials and Metohds: A high-level computing language was chosen to implement Niemierko's EUD, Lyman-Kutcher-Burman model's NTCP, and OED. The requirements for treatment planning analysis were defined and the procedure, using a developed GUI based program, was described with figures. The calculated data, including volume at a dose, dose at a volume, EUD, and NTCP were evaluated by a commercial radiation therapy planning system, Pinnacle (Philips, Madison, WI, USA) for comparison. Results: The volume at a special dose and a dose absorbed in a volume on a dose volume histogram were successfully extracted using DVH data of several radiation planning systems. EUD, NTCP and OED were successfully calculated using DVH data and some required parameters in the literature. Conclusion: A simple DVH analyzer program was developed and has proven to be a useful research tool for radiation therapy.

• Journal of Internet Computing and Services
• /
• v.8 no.1
• /
• pp.57-70
• /
• 2007

This paper is to construct a healthcare database using information obtained from healthcare home environments, and use this one for healthcare home services, Especially, our researching focus in this paper is how to design healthcare database scheme and how to use this constructed database on the Framework for Supporting Healthcare Integrated Service(FSHIS) we developed previously. Healthcare information is designed to database schemes in accordance to the specific save types of the data collected from various typed-sensors. The healthcare database constructed by using this information for the purpose of healthcare home services is divided into the base information with real schemes and the context based information with view schemes. Firstly, the base information includes low data obtained from physical sensors relevant to locations, healths, environments, and the personnel healthy profiles. The other is the context based information that is produced and fused by using the based information. This context based information might be got via various view schemes according to healthcare application services. Finally, for verifying the practical use of healthcare database constructed in this paper, Via interconnecting this database to our FSHIS, we show an example of healthcare home monitoring service using information (basic and context based information), emergency call, home appliance control, and so on needed from living activity area for elderly living alone.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.902-909
• /
• 2015

In this paper, monovision based relative navigation for a satellite proximity operation is studied. The chaser satellite only uses one camera sensor to observe the target satellite and conducts image tracking to obtain the target pose information. However, by using only mono-vision, it is hard to get the depth information which is related to the relative distance to the target. In order to resolve the well-known difficulty in computing the depth information with the use of a single camera, the active contour method is adopted for the image tracking process. The active contour method provides the size of target image, which can be utilized to indirectly calculate the relative distance between the chaser and the target. 3D virtual reality is used in order to model the space environment where two satellites make relative motion and produce the virtual camera images. The unscented Kalman filter is used for the chaser satellite to estimate the relative position of the target in the process of glideslope approaching. Closed-loop simulations are conducted to analyze the performance of the relative navigation with the active contour method.

• Journal of Internet Computing and Services
• /
• v.17 no.3
• /
• pp.75-85
• /
• 2016

Changes in the distribution and sharing information using the Internet is changing the most part in our daily life, Utilizing the Internet of our lives to the rapid development of IT technology, are living in the off-line (off-line) and online (on-line) a mix of life, We expect now online life specific gravity is further increased. However, do not systematically implement the education of Internet ethics awareness deficiencies of objective indicators to assess the current knowledge level of the Internet ethics is the actual situation. Therefore, in this paper, it provides a development process in order to establish a common standard for the evaluation of Internet ethics index. Development procedure of Internet ethics index in order to establish a common standard, "evaluation item (draft) derivation", "Creating a questionnaire", "the calculation of the analysis and item-by-item weight of the questionnaire", and a common reference determination of the stage having. Was also a questionnaire that target 46 people to calculate the weight of the common reference. Internet ethics index evaluation model through the establishment of the common standards developed in this paper, municipal road Office of Education, related organizations, high school, such as small, medium, can be utilized as an indicator to measure the Internet ethics education level.

• Journal of Internet Computing and Services
• /
• v.12 no.1
• /
• pp.99-110
• /
• 2011

Mobile environments rapidly changing and digital convergence widely employed, mobile devices including smart phones have been playing a critical role that changes users' lifestyle in the areas of entertainments, businesses and information services. The various services using mobile devices are developing to meet the personal needs of users in the mobile environments. Especially, an LBS (Location-Based Service) is combined with other services and contents such as augmented reality, mobile SNS (Social Network Service), games, and searching, which can provide convenient and useful services to mobile users. In this paper, we design and implement the prototype of mobile personal assistant (PA) agents. Our personal assistant agent helps users do some tasks by hiding the complexity of difficult tasks, performing tasks on behalf of the users, and reflecting the preferences of users. To identify user's preferences and provide personalized services, clustering and classification algorithms of data mining are applied. The clusters of the log data using clustering algorithms are made by measuring the dissimilarity between two objects based on usage patterns. The classification algorithms produce user profiles within each cluster, which make it possible for PA agents to provide users with personalized services and contents. In the experiment, we measured the classification accuracy of user model clustered using clustering algorithms. It turned out that the classification accuracy using our method was increased by 17.42%, compared with that using other clustering algorithms.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.370-381
• /
• 2005

Mobile IP provides an efficient and scalable mechanism for host mobility within the Internet. Using Mobile If, mobile nodes may change their point of attachment to the Internet without changing their If address. However, it would result in a high signaling cost. To reduce the signaling cost, we factor in the fact that mobile users will not be actively communicating much of the time. In fact, there Is no necessity to send a binding update message to the home agent when an mobile node does not communicates with others while moving. From this point of view, we propose a lazy update strategy for minimizing signaling cost using the forwarding pointer in hierarchical Mobile IPv6. In our proposal, binding updates are sent only when a mobile node is in a busy mode. If an mobile node is in a dormant mode, binding update messages are delayed until busy mode using the forwarding pointer. As a result, our proposal can reduce the total signaling cost by eliminating unnecessary binding update messages when a mobile node Is in a dormant mode. In addition to, our proposal reduces unnecessary location update cost resulting from ping-pong effect under mobile node's dormant mode. Analysis results using the discrete analytic model presented in this paper shows that our proposal can has superior performance than hierarchical Mobile nv6 when the call-to-mobility ratio is low and the length of the forwarding pointer chain K is low.

• Journal of Internet Computing and Services
• /
• v.6 no.2
• /
• pp.141-152
• /
• 2005

Many organizations have been recognizing the necessity of workflow automation technologies according to the rapid expansion of business process oriented applications, such as enterprise resource pianning, customer relationship management, electronic approval management, and so on, Thus, they have started adopting workflow management systems as an essential technological solution for their workflow processes, However, we need some technological extensions and improvements on them in order to accommodate a new type of workflow processes, which is called cross-organizational global workflow processes that require a certain level of collaborations between the organizations engaged in the global workflow processes, Fragment-driven workflow modeling methodology is a Bottom-Up methodology composing a global workflow by defining each organization's own activities, which is called a fragment through a realtime cooperative system. The approach is able to not only simplify the modeling work but also keep each organization's independence in modeling a global workflow, In this paper, we describe the fragment-driven workflow modeling methodology and realize the methodology through the implementation of a cooperative swimlane workflow modeling system.