• 만화애니메이션 연구
• /
• 통권17호
• /
• pp.188-204
• /
• 2009

본 연구는 3차원 컴퓨터 그래픽 제작 산업분야에서 최근 가장 경쟁력 있는 분야로 대두되고 있는 연구/개발(R&D) 분야에서 "불의 표현을 중심으로 국내 관련업체들의 기술적 한계를 제시하고 해외 및 국내 애니메이션 제작에서 성공한 기술적 R&D의 과정과 그 결과를 통해 이러한 기술적 한계를 어떻게 극복해야 하는지에 대한 해답을 제시함으로써 과도기를 거쳐 제2의 도약기를 준비하는 국내 컴퓨터 그래픽 애니메이션 산업의 부흥에 도움이 되고자하는 목적으로 연구를 진행하고 있다. 흔히 CT와 IT의 상호 보완적인 특징을 활용한다면 이러한 문제 해결을 넘어 기술적 우위를 확보할 수 있다. 우리는 특히 컴퓨터 그래픽 제작 과정 중 물, 불, 바람, 구름 등의 Simulation System분야와 수십만 캐릭터의 집단행동 또는 단체행동 System 활용도를 중심으로 연구를 진행하였다. 그 중에서 본 논문은 불의 표현에 중점을 두고 실제 작업에 활용된 데이터를 기준으로 그 해답을 제시하였으며 기존의 국내에서 사용하던 전통적 활용방법과 각 연구단체에서 활발하게 진행 중인 프로젝트를 소개하고 본 연구의 적용과정과 결과를 소개함으로써 현업 종사자들에게 향 후 R&D 분야의 나아갈 방향을 제시하고자한다. 창조적인 부재에 너무 집착한 나머지 기술적인 연구 개발부분에의 소홀함이 향 후 미국이나 일본과의 더 큰 기술적 문제로 대두될 수 있음을 명심하고 지금부터라도 과감하고 결단력 있는 기술력의 연구 개발이 필요한 시점이다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.553-556
• /
• 1996

The cell loss probability recommended in the B-ISDN is in the range of 10$^{-8}$ ~ 10$^{-12}$ . When a simulation technique is used to analyze the performance of the ATM switching system, an enormous amount of computer time is required. In this study, we derive an importance sampling simulation technique that can be used to evaluate the loss probability obtained by the importance sampling simulation is very close to that obtained by the ordinary simulation and the computer time can be reduced drastically by the importance sampling simulation.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2001년도 Proceeding of KIN-CIN Joint Symposium 2001 on Satellite Navigation/AIS, lntelligence , Computer Based Marine Simulation System and VDR
• /
• pp.43-47
• /
• 2001

Computer simulation of abnormal atmospheric propagation condition and false echoes of marine radar have always been the difficulties in this field. The author of this paper has already done some constructive work.

• Journal of Welding and Joining
• /
• 제9권3호
• /
• pp.41-51
• /
• 1991

The thermomechanical coupling phenomena in the resistance welding process is complicated due to interactions of mechanical, thermal and electrical factors. Although experimental investigations of resistance spot welding have been carried out, but there are a few by computer simulation. so the purpose of this research is to decrease the time and cost much required in experimental investigation by carrying out the analysis of the resistance spot welding process through computer simulation based on the finite element method. The tool used in the computer simulation is the commercial ANSYS program package. A two dimensional axisymetric model is used to simulate the resistance spot welding for two stainless steel sheets of equal thickness and parametric study is carried out for variable welding current, workpieces of unequal thickness and dissimilar materials. The results from the computer simulation are in good agreement with the experimental one. Through these results, such items as stress distribution, temperature profiles, thermal expansion and weld nugget formation are predicted. Reliability and applicability of finite element models have been demonstrated to simulate and to analyze the resistance spot welding process.

• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.231-240
• /
• 2007

This paper presents an advanced modeling and simulation technique applied to DC/DC power electronic converters fed through renewable energy power sources. The distributed generation (DG) system at the Illinois Institute of Technology, which employs a phase-l system consisting of a photovoltaic-based power system and a phase-2 system consisting of a fuel cell based primary power source, is studied. The modeling and simulation of the DG system is done using the generalized state space averaging (GSSA) method. Furthermore, the paper compares the results achieved upon simulation of the specific GSSA models with those of popular computer aided design software simulations performed on the same system. Finally, the GSSA and CAD software simulation results are accompanied with test results achieved via experimentation on both, the PV-based phase-l system and the fuel cell based phase-2 power system.

• The Korean Journal of Ceramics
• /
• 제5권1호
• /
• pp.30-34
• /
• 1999

Particle settling behavior was studied by the computer simulation using simultaneous particle condensation and relaxation. This three-dimensional settling algorithm includes the estimation of powder sediment density. Density distribution through the powder sediment was compared and was agreed well with the experimental findings. Settling density depended strongly of the degree of particle relaxation. Sediment strength and isotropy also depended on the degree of particle relaxation. Sever particle bridging was found near sharp corners.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2002년도 추계학술대회 논문집
• /
• pp.115-121
• /
• 2002

The growth of semiconductor industry attracted to researchers like design, facility technique and making small size chip areas. But nowadays, cause of technology extension and oversupply and price down, yield improvement is the most important point on growth. This paper describes the computer mode]ing technique as the solutions to analyze the problem, to formalize the semiconductor manufacturing process and to build advanced manufacturing environments. The computer models are built referring an existing 8' wafer production line in Korea.

• 소성∙가공
• /
• 제17권2호
• /
• pp.113-116
• /
• 2008

Computer simulation of microstructure evolution during hot forging process is of great interest in recent years. Recrystallization model and grain growth model which use a phenomenological approach were summarized. The upsetting and cogging processes of waspaloy were simulated using $DEFORM^{TM}$ and the change in grain size were investigated in each deformation procedure.

• 산업경영시스템학회지
• /
• 제21권47호
• /
• pp.233-241
• /
• 1998

With the increasing complexity of man-made systems, computer simulation has become a widely used tool for the design and analysis of complex system. When computer simulation is used for the purpose of system design, the analysts want to develop strategies to achieve some pre-defined target condition for an output of interest while simultaneously minimizing its variance. The goal of this research is to develop and demonstrate a new method for the design of robust systems with multiple responses using the fuzzy satisfaction function and computer simulation experiments.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.53-56
• /
• 2007

Computer simulation of microstructure evolution during hot forging process is of great interest in recent years. Recrystallization model and grain growth model which use a phenomenological approach were summarized. For the waspaloy, upsetting process and cogging process were simulated using $DEFORM^{TM}$ and the change in grain size were investigated in each deformation procedure.