• Journal of The Korean Association of Information Education
• /
• v.14 no.4
• /
• pp.517-525
• /
• 2010

Because the existing Skemp's play activities learning has only been done on the offline, the hassles of learning paper production, the understanding of achievement levels, and the difficulty of feedback and compensation have been pointed out as a serious problem. Therefore, the aim of this study is to develop web-based learning tool applied the Skemp's play activities for elementary school students who learn mathematical skills easily in the web environment. To demonstrate the effectiveness of implemented web-based learning tool, we have analyzed questionnaire survey conducted for academic achievement of the third grade elementary school students. The analysis results show that for improving the ability of multiplication and division operation, the learning using web-based tool applied the Skemp's play activities is more effective than the learning based on the existing educational process and the result is statistically significant at the 5% significance level.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.3 s.303
• /
• pp.33-40
• /
• 2005

In order to successfully exploit underwater resources, the first step would be a marine environmental research and exploration on the seafloor. Traditionally one sets up a long-term underwater experimental unit on the seafloor and retrieves the unit later after a certain period time. Essential to these applications is the reliable teleoperation and telemetering of the unit. This study presents ultrasonic-wave remote control system and an underwater sound recognition algorithm that can identify the sound signal without the influence of disturbances due to underwater environmental changes. The proposed method provides a means suitable for units which require low power dissipation and long-time underwater operation. We demonstrate its ability of securing stability and fast sound recognition through experimental methods.

• Journal of Information Technology and Architecture
• /
• v.9 no.4
• /
• pp.455-464
• /
• 2012

Due to the recent data explosion, methods which can meet the requirement of large data analysis has been studying. This paper proposes MRIterativeBUC algorithm which enables efficient computation of large data cube by distributed parallel processing with MapReduce framework. MRIterativeBUC algorithm is developed for efficient iterative operation of the BUC method with MapReduce, and overcomes the limitations about the storage size and processing ability caused by large data cube computation. It employs the idea from the iceberg cube which computes only the interesting aspect of analysts and the distributed parallel process of cube computation by partitioning and sorting. Thus, it reduces data emission so that it can reduce network overload, processing amount on each node, and eventually the cube computation cost. The bottom-up cube computation and iterative algorithm using MapReduce, proposed in this paper, can be expanded in various way, and will make full use of many applications.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.172-182
• /
• 2020

In order to offer specific information needed to assist in operation of a ship with same type rudder through evaluating the maneuverability of training ship A-Ra with flapped rudder, sea trials based full scale for turning test, zig-zag test with rudder angle 10° and 20°, and spiral test at service condition were carried out on starboard and port sides around Jeju Island according to the standards of maneuverability of IMO. As a result, the angular velocity of port turn was higher than that of starboard turn. Therefore, the size of turning circle was longer on the starboard side. In addition, variation of the transfer due to various factors was more stable than those of the others. In the Z-test results, the mean of 1st and 2nd overshoot angles were 9.8°, 6.3° and 15.3°, 9.2° respectively when the port and starboard was 10°; the 1st overshoot angle were 18°, 13.7° when using 20°. Her maneuverability index T' and K' can be easily determined by using a computer with the data obtained from Z-test where K' and T' are dimensionless constants representing turning ability and responsiveness to the helm, respectively. In the Z-test under flap rudder angle 10°, the obtained K' value covered the range of 2.37-2.87 and T' was 1.74-3.45. Under the flap rudder angle 20°, K' and T' value showed 1.43-1.63, 1.0-1.73, respectively. In the spiral test, the loop width was unstable at +0.3° and -0.5°-0.9° around the midship of flap rudder. As a result, course stability was comparatively good. From the sea trial results, training ship ARA met the present criterion in the standards of maneuverability of IMO.

• Journal of Korean Academy of Nursing
• /
• v.35 no.6
• /
• pp.1113-1124
• /
• 2005

Purpose: The purpose of this study was to develop an e-Learning program about medication for nurses to enhance nurses' medication performance ability and to analyze learners' responses after studying with this program. Method: For the development of the e-Learning program, the NBISD(Network Based Instructional Systems Design) model, suggested by Jung(I999) was applied as a basic model and the instruction design theory of Gagne & Briggs(1979) and ARCS theory of Keller(I983) were applied. After the operation of this program for one month to 34 new nurses, learners' responses were analyzed. Result: Learners' knowledge of medication was greatly improved after this program. In addition learners' satisfaction with the overall education program, help in field applicability, ease of screen shift and exploration, and tutor activities were high and the contents were regarded suitable for e-Learning. Many things were advantageous such as easy accessibility, easy understandability with pictures and flash animation, practical cases and feedback from a tutor. Provision of a supplementary handout and improvement of a tight time schedule were pointed out as things to be improved. Conclusion: This e-Learning program can be used effectively for medication education for registered nurses, student nurses, and new nurses.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.3
• /
• pp.226-233
• /
• 2015

Pose estimation is an important operation for many vision tasks. This paper presents a method of estimating the camera pose, using a known landmark for the purpose of autonomous vertical takeoff and landing(VTOL) unmanned aerial vehicle(UAV) landing. The proposed method uses a distinctive methodology to solve the pose estimation problem. We propose to combine extrinsic parameters from known and unknown 3-D(three-dimensional) feature points, and inertial estimation of camera 6-DOF(Degree Of Freedom) into one linear inhomogeneous equation. This allows us to use singular value decomposition(SVD) to neatly solve the given optimization problem. We present experimental results that demonstrate the ability of the proposed method to estimate camera 6DOF with the ease of implementation.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.213-218
• /
• 2001

VR (Virtual reality) technologies have given engineers the ability to design, test, and evaluate engineering systems in a virtual environment. The virtual plant is the highlight of the application of the VR technology to plant engineering. Plant design, maintenance, control, management, operation are integrated in the virtual plant. The VR monitoring system including the concept of the virtual plant is developed to replace a current control room that has number of gages and warning lamps in two-dimensional panels which shows the operating status of a plant. The operating status of the plant is displayed in the VR monitoring system through the realistic computer graphics. Sophisticated, realistic and prompt control becomes possible. The VR monitoring system consists of advanced visualization, walk-through simulation and navigation. In the virtual environment, a user can navigate and interact with each component of a plant. In addition, the user can access the information by just clicking interesting component. The VR monitoring system is operated with various modules, such as (1) virtual plant constructed with Graphic Management System (GMS), (2) Touch & Tell System, and (3) Equipment DB System of Part. In order to confirm the usefulness of the VR monitoring system, a pilot gas plant which is currently being used for plant operator training is taken as application. The end of the paper gives an outlook on the future work and a brief conclusion.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.146-151
• /
• 2005

This paper describes a new voltage disturbance generator for the performance test of a 1-phase UPS(Uninterruptible Power Supply). The proposed scheme has the ability of voltage sag, swell, and outage generation. The structure of the proposed generator is simple and cost-effective. The voltage disturbance can be generated with easy control system. The circuit operation and characteristics of the proposed converter are described and the usefulness of the converter is verified through computer simulations and experimental results.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.5
• /
• pp.175-188
• /
• 2011

As complementary metal-oxide semiconductor (CMOS) continues to scale down deeper into the nanoscale, various device non-idealities cause the I-V characteristics to be substantially different from well-tempered metal-oxide semiconductor field-effect transistors (MOSFETs). The last few years witnessed a dramatic increase in nanotechnology research, especially the nanoelectronics. These technologies vary in their maturity. Carbon nanotubes (CNTs) are at the forefront of these new materials because of the unique mechanical and electronic properties. CNTFET is the most promising technology to extend or complement traditional silicon technology due to three reasons: first, the operation principle and the device structure are similar to CMOS devices and it is possible to reuse the established CMOS design infrastructure. Second, it is also possible to reuse CMOS fabrication process. And the most important reason is that CNTFET has the best experimentally demonstrated device current carrying ability to date. This paper discusses and reviewsthe feasibility of the CNTFET's application at this point of time in integrated circuits design by investigating different types of circuit blocks considering the advantages that the CNTFETs offer.

• Journal of Engineering Education Research
• /
• v.15 no.1
• /
• pp.26-31
• /
• 2012

The late industrial structures have been changed rapidly. Thus the educational institutes and businesses should be able to react with speed to the change of paradigm. The importance of talent who is taped and leads to epochal and social trend of change has been strongly emphasized. Recently with the phenomena of technical fusion and composition it is emphasized that the requested talent by an enterprise is the multi professional person who has the diverse professional technology and the ability of the solving problem. Changing a person who requires from an enterprise the upbringing goal of the educational institute undergo a great many changes. Thus analyzing the required talent by an enterprise, the purpose of this study is to suggest the educational program to train the multi professional person by the example of the operation of innovative engineering education program financially supported by Minister of Education, Science and Technology.