• Journal of Korean Academy of Nursing
• /
• v.29 no.5
• /
• pp.1087-1102
• /
• 1999

Diabetes mellitus, a universal and prevalent chronic disease, is projected to be one of the most formidable worldwide health problems in the 21st century. For those living with diabetes, there is a need for self-care skills to manage a complex medical regimen. Self-efficacy which refers to one's belief in his/her capability to monitor and perform the daily activities required to manage diabetes has be found to be related to self-care. The concept of self-efficacy comes from social cognitive theory which maintains that cognitive mechanism mediate the performance of behavior. The literature cites several research studies which show a strong relationship between self-efficacy and self-care behavior. Meta-analysis is a technique that enables systematic review and quantitative integration of the results from multiple primary studies that are relevant to a particular research question. Therefore, this study was done using meta-analysis to quantitatively integrate the results of independent research studies to obtain numerical estimates of the overall effect of a self-efficacy with diabetic patient on self-care behaviors. The research proceeded in three stages : 1) literature search and retrieval of studies in which self-efficacy was related to self-care, 2) coding, and 3) calculation of mean effect size and data analysis. Seventeen studies which met the research criteria included study population of adults with diabetes, measures of self-care and measures of self-efficacy as a predictive variable. Computation of effect size was done on DSTAT which is a statistical computer program specifically designed for meta-analysis. To determine the effect of self-efficacy on self-care practice homogeneity tests were conducted. Pooled effect size estimates, to determine the best subvariable for composite variables, metabolic control variables and component of self-efficacy and self-care, indicated that the effect of self-efficacy composite on self-care composite was moderate to large. The weighted mean effect size of self-efficacy composite and self-care composite were ＋.76 and the confidence interval was from ＋.66 to ＋.86 with the number of subjects being 1,545. The total for this meta-analysis result showed that the weighted mean effect sizes ranged from ＋.70 to ＋1.81 which indicates a large effect. But since reliabilities of the instruments in the primary studies were low or not stated, caution must be applied in unconditionally accepting the results from these effect sizes. Meta-analysis is a useful took for clarifying the status of knowledge development and guiding decision making about future research and this study confirmed that there is a relationship between self-efficacy and self-care in patients with diabetes. It, thus, provides support for nurses to promote self-efficacy in their patients. While most of the studies included in this meta-analysis used social cognitive theory as a framework for the study, some studies use Fishbein & Ajzen's attitude model as a model for active self-care. Future research is needed to more fully define the concept of self-care and to determine what it is that makes patients feel competent in their self-care activities. The results of this study showed that self-efficacy can promote self-care. Future research is needed with experimental design to determine nursing interventions that will increase self-efficacy.

• Journal of Conservation Science
• /
• v.22
• /
• pp.31-42
• /
• 2008

A stone cultural heritage often lacks design drawing and detailed geometric informations, thus it becomes more difficult to conservation and restoration. Even though there is active database of detail shape information and numerical measurement for stone monuments, most of the data is in hard-to-utilize two-dimensional images. The new technology developed to overcome this problem is three-dimensional image scanning system. The multi-storied stone pagoda of the Daewonsa temple was analysed with 3D scanning image data then survey map with orientation displacement was evaluated. The difference of each side became apparent with the members of the stone properties was measured, also horizontal and vertical displacement occurred. Horizontal displacement occurred in increasing severity from left to right and from body section to upper part. The 8th roof stones are leaning toward northwest direction due to lateral displacement. The evaluation and measurement of displacement could cause a little errors due to the characteristics uneven surface of stone monuments, computer program and mistakes from the researcher. In future, more precise measurement and stability studies should be done to suggest that accurate data for conservation and understanding of damage condition can be provided.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.43-54
• /
• 1989

In this paper, measured and calculated responses are compared in order to give how the static and dynamic responses occurred in steel railway bridges due to train loads could be calculated appropriately. From this, it is investigated how the impact factors are varied by changing the train speed above 100km/h Field measurement is carried out by the steel strain gages and displacement transducers at the main design points, and then the static and dynamic response, fundamental frequencies, damping ratios and impact factors of the bridges are obtained. Static analysis is done using the computer program developed according to three dimensional matrix structural analysis in which the trains and bridges are modelled as 1,2 and 3 dimensions. Dynamic analysis is done according to 2 approaches, the moving force and mass problem. In moving force problem, the solutions are obtained by the modesuperposition-method and in moving mass problem by the direct integration method. From this study, it is known that in order to obtain the static response in the railway bridges, the bridge could be modelled by 1 or 2 dimension as in the highway bridge, however the response ratio(measured/calculaled) is high comparing to the highway bridges. By the way, the dynamic response should be obtained by the moving mass problem. And by comparing the measured and code specified impact factors, it is known that the factors specified in the present railway bridge code are very safe under the present service speed below 100km/h. However, because the factors become very high under the speed above 100km/h, especially in the simple plate girder bridge, it is thought that the code specification on impact factor should be discussed enough under the rapid transit system.

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.163-169
• /
• 1988

This study was conducted to predict the density changes according to concentration and temperature changes under freezing point. This information is needed for the design of freezing equipment and for the efficient utilization of refrigerating system. Orange juice, Apple juice, Grape juice and Sucrose solution were used for the measurement of density in this study at the temperature range from $-5^{\circ}C$ to $-40^{\circ}C$ and at the concentration range from 10 to 40%. The unfrozen water fraction of samples was determined by Heldman's method. The density values were determined by measuring the weight of a frozen solution at each temperature with a known volume. Solutions were placed in the thick-walled aluminum tubes. When the solution was frozen the excess ice was removed with a razor until the surface of the ice was flush with the top of the aluminum tube. The tube and ice were weighted immediately. Knowing the volume, tare weight, and final weight, the density could be determined. With this procedure, the data of density and unfrozen water fraction for fruit juices and sucrose solution were collected. The density prediction models of fruit juices and sucrose solution under freezing point were established by the optimization computer program with measured experimental data.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.5
• /
• pp.199-212
• /
• 2008

Software simulation has been widely used for the design and application development of a large-scale wireless sensor network. The degree of details of the simulation must be high to verify the behavior of the network and to estimate its execution time and power consumption of an application program as accurately as possible. But, as the degree of details becomes higher, the simulation time increases. Moreover, as the number of sensor nodes increases, the time tends to be extremely long. We propose an optimal-synchronous parallel discrete-event simulation method to shorten the time in a large-scale sensor network simulation. In this method, sensor nodes are partitioned into subsets, and each PC that is interconnected with others through a network is in charge of simulating one of the subsets. Results of experiments using the parallel simulator developed in this study show that, in the case of the large number of sensor nodes, the speedup tends to approach the square of the number of PCs participating in the simulation. In such a case, the ratio of the overhead due to parallel simulation to the total simulation time is so small that it can be ignored. Therefore, as long as PCs are available, the number of sensor nodes to be simulated is not limited. In addition, our parallel simulation environment can be constructed easily at the low cost because PCs interconnected through LAN are used without change.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.8
• /
• pp.860-865
• /
• 2006

The characteristics of flow field and turbulent mixing efficiency of SS in non-aerated contacting reactor are critical design parameters directly affecting on the efficiency of the overall process of wastewater treatment system. To this end, in this study numerical fluid dynamic calculation has been made to investigate the flow field and concentration distribution of SS in terms of specification(shape and dimension) of impeller and other operating conditions. As the first step, the performance of the computer program developed was successfully evaluated by the comparison of the typical flow field with the type of impeller with that appeared in open literature. Further, a series of parametric investigations are made in terms of interesting parameters such as the type and dimension of impeller, location, and number of impeller, etc. A number of useful conclusions obtained by numerical calculation are the superiority of mixing efficiency of pitched type than the flat one together with the visible increase of the overall mixing effect by the employment of the larger impeller and increase of the impeller number, etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.310-315
• /
• 2017

Although studies evaluating the effects of the blasting vibration on the adjacent structures from various angles have continued, cases of securing the safety of the adjacent buildings and researching the proper blasting method for the field condition by analyzing the vibration waveform of the measuring field while performing the open pit blasting are poor. Therefore, it is necessary to present a remedy for blasting pattern selection through test blasting that is appropriate for field conditions, and is economical and efficient. In this study, open pit blasting work was conducted based on the separation distance applied according to the standard blasting method by test blasting and the vibration regulation standard in the road expansion construction site to measure the blasting vibration value, and the vibration prediction equation by blasting methods was examined using a regression analysis computer program to calculate K, N, and R of the confidence level 95%. By setting the blasting allowed vibration standard of the test blasting target area to 0.3cm/sec, and the charring weight and blasting method by the separation distances according to the blasting vibration estimation equation of the open pit blasting guideline and the blasting vibration estimation equation of the test blasting were compared/analyzed, it was possible to identify the factors that increased the working expenses. In addition, the measurement and analysis of the adjacent structures during open pit blasting and the blasting vibration were performed after selecting the most adjacent structure to the open pit blasting spot to analyze the problems on the test blasting procedure and analysis method in the open pit blasting design/construction guidelines, which appeared in the process of completing open pit blasting construction, and a remedy is presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.71-79
• /
• 2008

High voltage distribution lines in the electric railway system placed according track with communication lines and signal equipments. Case of the over head lines is occurrence the many fault because lightning, rainstorm, damage from the sea wind and so on. According this fault caused protection device to wrong operation. One line ground fault that occurs most frequently in railway high voltage distribution lines and sort of faults is line short, three line ground breaking of a wire, and so on. For this reason we need precise maintenance for prevent of the faults. The most important is early detection and fast restoration in time of fault for a safety transit. In order to develop an advanced fault location device for 22.9[kV] distribution power network in electric railway system this paper deals with new fault locating algorithm using flow technique which enable to determine the location of the fault accurately. To demonstrate its superiorities, the case studies with the algorithm and the fault analysis using PSCAD/EMTDC (Power System Computer Aided Design/Electro Magnetic Transients DC Analysis Program) were carried out with the models of direct-grounded 22.9[kV] distribution network which is supposed to be the grounding method for electric railway system in Korea.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1081-1089
• /
• 2005

In order to examine the application feasibility of Orimulsion fuel in a commercial boiler using heavy fuel oil, a numerical and experimental research efforts have been made especially to figure out the fundamental combustion characteristics of this fuel in a small-scale boiler. One of the notable combustion features of Orimulsion fuel is the delayed appearance of flame location with the flame shape of rather broad distribution, which is found experimentally and confirmed by numerical calculation. This kind of flame characteristics is considered due to the high moisture content included inherently in the process of Orimulsion manufacture together with micro-explosion by the existence of fine water droplets. In order to investigate the effect on the combustion characteristics of Orimulsion, a series of parametric investigation have been made in terms of important design and operational variables such as injected amount of fuel, types of atomization fluid, and phonemenological radiation model employed in the calculation, etc. The delayed feature of peak flame can be alleviated by the adjustment of the flow rate of injected fuel and the generating features of CO, $SO_2$ and NO gases are also evaluated in the boiler. When the steam injection as atomizing fluid is used, the combustion process is stabilized with the reduced region of high flame temperature. In general, the calculation results are physically acceptable and consistent but some refinements of phenomenological models are necessary for the better resolution of pollutant formation. From the results of this small-scale Orimulsion boiler, it is believed that a number of useful information are obtained with the working computer program for the near future application of Orimulsion fuel to a conventional boiler.

• The Journal of Society for e-Business Studies
• /
• v.22 no.1
• /
• pp.107-122
• /
• 2017

Nowadays, digital forensic experts are not only computer experts who restore and find deleted files, but also general experts who posses various capabilities including knowledge about processes/laws, communication skills, and ethics. However, there have been few studies about qualifications or competencies required for digital forensic experts comparing with their importance. Therefore, in this study, AHP questionnaires were distributed to digital forensic experts and analyzed to derive priorities of competencies; the first-tier questions which consisted of knowledge, technology, and attitude, and the second-tier ones which have 20 items. Research findings showed that the most important competency was knowledge, followed by technology and attitude but no significant difference was found. Among 20 items of the second-tier competencies, the most important competency was "digital forensics equipment/tool program utilization skill" and it was followed by "data extraction and imaging skill from storage devices." Attitude such as "judgment," "morality," "communication skill," "concentration" were subsequently followed. The least critical one was "substantial law related to actual cases." Previous studies on training/education for digital forensics experts focused on law, IT knowledge, and usage of analytic tools while attitude-related competencies have not given proper attention. We hope this study can provide helpful implications to design curriculum and qualifying exam to foster digital forensic experts.