• 대한조선학회논문집
• /
• 제50권3호
• /
• pp.167-174
• /
• 2013

Model ice forming process in ice tank needs several steps of seeding, freezing, tempering. In those process, one of the most important factors to affect the accuracy of experiment is the homogeneity of the ice thickness and the temperature. This paper investigated a computational and statistical method to assess the uniformity of the model ice. In addition, the different configurations of freezing systems were considered to improve the uniformity. Qualitative assessment using streamlines from the cooling units was carried out by computational fluid dynamics (CFD) and the quantitative evaluations of the homogeneity were compared using the temperature distribution on the ice surface. In addition, multi species transport analysis is introduced to understand the circulation efficiency of cold air from the cooling units. As the results, optimized configurations were determined by adjusting the angles of vane in the cooling units.

• 한국전산유체공학회지
• /
• 제11권1호
• /
• pp.57-66
• /
• 2006

An optimal shape design approach is presented for a subsonic S-shaped intake using aerodynamic sensitivity analysis. Two-equation turbulence model is employed to capture strong counter vortices in the S-shaped duct more precisely. Sensitivity analysis is performed for the three-dimensional Navier-Stokes equations coupled with two-equation turbulence models using a discrete adjoint method For code validation, the result of the flow solver is compared with experiment data and other computational results of bench marking test. To study the influence oj turbulence models and grid refinement on the duct flow analysis, the results from several turbulence models are compared with one another and the minimum number of grid points, which can yield an accurate solution is investigated The adjoint variable code is validated by comparing the complex step derivative results. To realize a sufficient and flexible design space, NURBS equations are introduced as a geometric representation and a new grid modification technique, Least Square NURBS Grid Approximation is applied With the verified flow solver, the sensitivity analysis code and the geometric modification technique, the optimization of S-shaped intake is carried out and the enhancement of overall intake performance is achieved The designed S-shaped duct is tested in several off-design conditions to confirm the robustness of the current design approach. As a result, the capability and the efficiency of the present design tools are successfully demonstrated in three-dimensional highly turbulent internal flow design and off-design conditions.

• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.7-13
• /
• 2015

Vortex tube is a thermal static device that separates compressed air into hot and cold streams. In general, the cooling efficiency of vortex tubes is lower than that of traditional air conditioning equipment and vortex tubes are mainly used for industrial spot cooling applications because of their quick responses. In this study, conical frustums are employed in the nozzle chamber to improve the cooling performance. Conical frustums can be used to decrease the ineffective mass fraction that directly passes through the cold exit without energy separation. The shape optimization of conical frustums has been performed using full factorial design. It is found that the height of frustums has the largest main effects on the cooling performance. Computational results show that the cooling performance can be increased by about 10% within the considered range of the design parameters. This is because the ineffective mass fraction toward the cold exit is decreased by about 20%.

• 대한산업공학회지
• /
• 제17권2호
• /
• pp.131-142
• /
• 1991

The concept of criterion function is proposed as a framework for comparing the geometric and computational characteristics of various nonlinear programming approaches to linear programming such as the method of centers, Karmakar's algorithm and the gravitational method. Also, we discuss various computational issues involved in obtaining an efficient parallel implementation of these methods. Clearly, the most time consuming part in solving a linear programming problem is the direction finding procedure, where we obtain an improving direction. In most cases, finding an improving direction is equivalent to solving a simple optimization problem defined at the current feasible solution. Again, this simple optimization problem can be seen as a least squares problem, and the computational effort in solving the least squares problem is, in fact, same as the effort as in solving a system of linear equations. Hence, getting a solution to a system of linear equations fast is very important in solving a linear programming problem efficiently. For solving system of linear equations on parallel computing machines, an iterative method seems more adequate than direct methods. Therefore, we propose one possible strategy for getting an efficient parallel implementation of an iterative method for solving a system of equations and present the summary of computational experiment performed on transputer based parallel computing board installed on IBM PC.

• 한국자동차공학회논문집
• /
• 제3권5호
• /
• pp.82-89
• /
• 1995

The three-dimensional fluid motion through the intake port and cylinder of a single DOHC SI engine was investigated with a commercial computational fluid dynamics simulation program, STAR-CD. This domain includes the intake port, intake valves and combustion chamber. Steady induction port flows for various valve lifts have been simulated for an actual engine configuration. The geometry was obtained by direct interface with a three-dimensional CAD software for complicated port and valve shape. The computational grid was generated using the commercial preprocessor ICEM CFD/CAE. Detailed procedures were presented on the generation of the geometry and the block-structured mesh. A standard k-${\varepsilon}$ turbulent model was applied to consider the complexity of the geometry and the fluid motion. The global flow patterns and the distributions of various quantities, such as pressure, velocity magnitude around the valve seat etc., were examined. The computational results, such as mass flow rate, discharge coefficient etc., for various valve lifts were compard with the experimental results and the computational results were found in good agreement with the experiment.

• 정보교육학회논문지
• /
• 제23권4호
• /
• pp.355-362
• /
• 2019

초등학생을 위한 소프트웨어교육에서 파이썬과 같은 텍스트 기반 프로그래밍언어를 사용해 코딩을 교육하려는 연구가 활발히 이루어지고 있다. 일반적으로 블록 기반의 프로그래밍언어에 비하여 이러한 고급언어는 피지컬 컴퓨팅용 키트 또는 다양한 프로그래밍언어와 결합해 수행하는 학습 활동을 지원하고 있다. 본 연구는 텍스트 기반 언어의 어려움을 극복하기 위해 ARCS 모형을 적용한 컴퓨팅사고력 기반의 코딩 프로젝트를 수행하였다. 실험 결과에서 학생들은 전반적으로 동기유발 측면에서 프로그래밍에 대한 자신감 및 흥미를 나타나고 있으며, 특히 컴퓨팅사고력의 변화에서 반복, 함수, 객체에 대한 이해가 높게 나타났는데, 이러한 경향은 텍스트 기반 언어 사용과 파이썬 모듈의 효과로 여겨진다.

• 해양환경안전학회지
• /
• 제28권7호
• /
• pp.1244-1251
• /
• 2022

지난 10년간 선박의 횡동요 복원력 상실에 의한 해양사고가 지속해서 증가하고 있어, 횡동요 운동을 효과적으로 줄일 수 있는 장치가 필요한 실정이다. 횡동요 감쇄 탱크는 단순한 설치만으로 횡동요 저감을 가져오는 대표적인 수동형 제어장치로 그 장점이 널리 알려져 있다. 따라서 본 연구에서는 U-튜브형 횡동요 감쇄 탱크의 수치해석 기법을 개발하고자 한다. 특히, 해석기법의 검증을 위해 자유수면 높이를 실험을 통해 계측하였다. 수치해석기법은 메쉬 의존성, 난류모델 (k-𝜖, k-𝜔, Reynolds Stress Model), 시간 간격 크기 및 반복횟수 등의 영향을 비교하여 개발하였다. 최종적으로 개발된 해석기법은 Realizable k-𝜖이 난류 모델에 10-2s 수준의 시간 간격 크기와 15회의 반복횟수를 적용하였다. 2가지의 U-튜브형 감쇄 탱크의 조건에서 계측된 자유수면 높이를 이용하여 개발된 해석기법을 검증하였다. 본 연구의 수치해석은 RANS 기반 상용 해석 Solver인 STAR-CCM+ (ver. 17.02)을 이용하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.590-595
• /
• 2008

In the present paper, the impact damage behavior of steel plate reinforced concrete panels exposed to shock impulsive loading and fragment impact loading is investigated. To evaluate the retrofit performance of a steel-strengthened concrete panels, a numerical experiment using a numerical simulation with AUTODYN, an explicit analysis program is introduced because a real explosion experiment requires the vast investment and expense for facilities as well as the deformation mechanisms are too complicated to be reproduced with a conventional closed-form analyses. The model for the analysis is simplified and idealized as a two-dimensional and axisymmetric case controled with geometry, boundary condition and material properties in order to obtain a resonable computation time. As a result of the analysis, panels subject to either shock loading or fragment loading without the steel plate reinforcement experience the perforation with spalled fragments. In addition, the panels reinforced with steel plate can prevent the perforation and provide the good mechanical effect such as the increase of global stiffness and strength through the composite action between the concrete slab and the steel plate.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.33-40
• /
• 2002

The hydraulic performance analysis of a pump system composed of an inducer and impeller for the application on turbopumps has been performed using three-dimensional Wavier-Stokes equations. A simple mixing-plane method and a full interaction method are used to simulate inducer/impeller interactions. The computations adopting two methods show almost similar results due to the weak interaction between the inducer and impeller since the inducer outlet blade angle is rather small. But, because the inducer and the impeller are closely spaced near the shroud region at the interface, flow angles at the impeller inlet show different results between two methods. Thus, the full interaction method predicted about $2\%$ higher pump performance than the mixing-plane method. And the effects of prewhirl at the impeller inlet are also investigated. As the inlet flow angle is increased, the head rise and the efficiency are decreased. The computational results are compared with experimental ones. The computational results at the design point show good agreements with experimental data. But the computation was found to under-predict the head rise at high mass flow rates compared to the experiment, further study must be followed in terms of the computation and experiment.

• 소성∙가공
• /
• 제15권5호
• /
• pp.347-353
• /
• 2006

The delivery system such as sprue, runner and gate is a waste of resin in injection molding operation. In this study the reduction of runner size has been investigated using injection molding CAE softwares, Moldflow and Moldex3D, and commercial CFD Softwares, Fluent and Polyflow. To verify the computational results experiment was performed. There were three considerations in deciding optimal runner size in this study: minimum pressure at the gate that makes resin fully filled in the cavity, minimum runner size that compensates shrinkage of resin in the cavity, and frozen layer thickness formed in the runner during injection. Through the computer simulations the optimal runner size that satisfies those three considerations has been decided. Although the computational results among the softwares were slightly different, it was enough to predict the optimal runner size. The previous runner diameter was 8 mm and predicted optimal size was 5 mm. This was verified by injection molding experiment. Thus, the way of CAE application in deciding optimal runner size adapted in this study would be appropriated.