• 한국건설순환자원학회논문집
• /
• 제6권4호
• /
• pp.336-341
• /
• 2018

프리텐션 콘크리트 부재에서 긴장재에 도입된 프리스트레싱힘은 긴장재와 콘크리트의 직접 부착에 의하여 콘크리트에 전달되므로 응력전달길이를 합리적으로 산정하는 것이 중요하다. 프리텐션부재 또는 프리캐스트 부재에 UHPC를 사용하는 경우 품질관리 측면에서 많은 장점이 있다. 따라서, 이 논문은 초고성능 콘크리트를 사용한 프리텐션 부재에 있어서 PS 강연선의 응력전달길이를 구하기 위하여 초고성능 콘크리트의 압축강도, 피복두께, 긴장재의 지름 및 긴장력을 변수로 하여 실험을 진행하고 그 결과를 분석한 내용을 정리한 것이다. 실험 결과에 따르면 초고성능 콘크리트를 사용한 경우 일반 콘크리트에 비하여 응력 전달길이가 크게 감소하였으며, 압축강도 수준이 증가할수록 응력전달길이가 감소하는 것을 확인할 수 있었다. 이는 초고성능 콘크리트의 높은 부착강도에서 비롯되는 것으로 판단된다. 또한, 실험결과와 기존 설계기준의 응력전달길이 산정식을 비교하고, 초고성능 콘크리트 프리텐션 부재의 응력전달길이를 산정할 수 있는 새로운 공식을 제안하였다.

• Steel and Composite Structures
• /
• 제29권6호
• /
• pp.785-802
• /
• 2018

In this paper, two different computational methods, called Rayleigh-Ritz and collocation are developed to estimate the ultimate strength of composite plates. Progressive damage behavior of moderately thick composite laminated plates is studied under in-plane compressive load and uniform lateral pressure. The formulations of both methods are based on the concept of the principle of minimum potential energy. First order shear deformation theory and the assumption of large deflections are used to develop the equilibrium equations of laminated plates. Therefore, Newton-Raphson technique will be used to solve the obtained system of nonlinear algebraic equations. In Rayleigh-Ritz method, two degradation models called complete and region degradation models are used to estimate the degradation zone around the failure location. In the second method, a new energy based collocation technique is introduced in which the domain of the plate is discretized into the Legendre-Gauss-Lobatto points. In this new method, in addition to the two previous models, the new model named node degradation model will also be used in which the material properties of the area just around the failed node are reduced. To predict the failure location, Hashin failure criteria have been used and the corresponding material properties of the failed zone are reduced instantaneously. Approximation of the displacement fields is performed by suitable harmonic functions in the Rayleigh-Ritz method and by Legendre basis functions (LBFs) in the second method. Finally, the results will be calculated and discussions will be conducted on the methods.

• 한국지반공학회논문집
• /
• 제24권4호
• /
• pp.67-78
• /
• 2008

본 연구에서는 시멘트의 고결효과를 정량적으로 파악하기 위하여 낙동강하상모래와 소량의 포틀랜드시멘트를 혼합하여 고결된 모래에 대하여 일축압축시험 및 배수조건과 비배수 조건의 삼축압축시험을 수행하였다. 시멘트혼합율의 증가에 따라 첨두강도 및 탄성계수는 증가하였고 시멘트의 결합력에 의하여 다일레이션 및 과잉간극수압이 억제되었으나 시멘트 결합력의 파괴 후 증가된 모래입자크기에 의하여 증가하였다. 그리고 배수조건의 응력-변형률 곡선은 연화거동이 나타났지만 비배수조건에서는 증가된 부(-)의 과잉간극수압에 의한 유효응력의 증가로 경화거동을 나타냈다. 각 조건에 대한 강도증가량의 예측을 위하여 선형을 가정한 다중회귀분석을 실시한 결과 제시된 경험식의 결정계수는 $0.81{\sim}0.91$로 나타나 신뢰성이 높은 것으로 평가되었으며 건조밀도의 경우 고결된 모래의 입도조건을 동시에 고려할 수 있어 고결된 모래의 강도를 결정하는데 중요한 변수로 분석되었다.

• 한국도로학회논문집
• /
• 제12권1호
• /
• pp.47-54
• /
• 2010

본 연구에서는 콘크리트 포장의 균열, 스폴링 등의 파손문제를 해결하기 위해 국내 시공사례가 없는 이층 포설 공법의 도입 및 기술 경제적 타당성을 검토하고자 하였다. 본 포장공법중 하나인 강섬유 보강 콘크리트(SFRC, Steel Fiber Reinforced Concrete)의 포장 배합 적용성이 검토되었다. 강섬유 함량과 포장 높이가 산정되었으며, 강섬유 보강 콘크리트의 물성 평가를 위해 압축강도, 휨강도, 휨인성 지수, 인장강도, 피로강도를 측정하였다. 슬럼프와 공기량은 대부분이 시방 기준을 만족하였으며, 28일 강도도 교통개방을 할 수준 정도로 발현되었다. 휨강도 실험 결과, 강섬유 보강 콘크리트가 무보강 콘크리트에 비해 휨인성은 증가하였지만 휨강도는 증가하지 않았다. 에너지 흡수능력, 피로 저항성 및 동결 융해저항성은 강섬유 보강 콘크리트가 무보강 콘크리트에 비해 향상되었다. 향후, 시험시공을 통해 강섬유 보강 콘크리트의 현장 적용성 및 공용성을 평가할 것이다.

• Computers and Concrete
• /
• 제16권6호
• /
• pp.825-846
• /
• 2015

In this study, shear tests on steel fiber reinforced-prestressed concrete (SFR-PSC) members were conducted with test parameters of the concrete compressive strength, the volume fraction of steel fibers, and the level of effective prestress. The SFR-PSC members showed higher shear strengths and stiffness after diagonal cracking compared to the conventional prestressed concrete (PSC) members without steel fibers. In addition, their shear deformational behavior was measured using the image-based non-contact displacement measurement system, which was then compared to the results of nonlinear finite element analyses (NLFEA). In the NLFEA proposed in this study, a bi-axial tensile behavior model, which can reflect the tensile behavior of the steel fiber-reinforced concrete (SFRC) in a simple manner, was introduced into the smeared crack truss model. The NLFEA model proposed in this study provided a good estimation of shear behavior of the SFRPSC members, such as the stiffness, strengths, and failure modes, reflecting the effect of the key influential factors.

• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.55-64
• /
• 2017

The paper concerns concrete carbonation, the phenomena that occurs in every type of climate, especially in urban-industrial areas. In European Standards, including Eurocode (EC) for concrete structures the demanded durability of construction located in the conditions of the carbonation threat is mainly assured by the selection of suitable thickness of reinforcement cover. According to EC0 and EC2, the thickness of the cover in the particular class of exposure depends on the structural class/category and concrete compressive strength class which is determined by cement content and water-cement ratio (thus the quantitative composition) but it is not differentiated for various cements, nor additives (i.e., qualitative composition), nor technological types of concrete. As a consequence the selected thickness of concrete cover is in fact a far estimation - sometimes too exaggerated (too safe or too risky). The paper presents the elaborated "self-terminated carbonation model" that includes abovementioned factors and enables to indicate the maximal possible depth of carbonation. This is possible because presented model is a hyperbolic function of carbonation depth in time (the other models published in the literature use the parabolic function that theoretically assume the infinite increase of carbonation depth value). The paper discusses the presented model in comparison to other models published in the literature, moreover it contains the algorithm of concrete cover design with use of the model as well as an example of calculation of the cover thickness.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권2호
• /
• pp.129-142
• /
• 2016

In Wyner-Ziv coding, video signals are reconstructed by correcting side information generated by block-based motion estimation/compensation at the decoder. The correction is not always accurate due to the limited number of parity bits and early stopping of low-density parity check accumulate (LDPCA) decoding in distributed video coding, or due to the limited number of measurements in distributed compressive video sensing. The blocking artifacts caused by block-based processing are usually conspicuous in smooth areas and degrade the perceptual quality of the reconstructed video. Conventional deblocking filters try to remove the artifacts by treating both sides of the block boundary equally; however, coding errors generated by block-based processing are not necessarily the same on both sides of the block boundaries. Such a block-wise difference is exploited in this paper to improve deblocking for Wyner-Ziv frameworks by designing a filter where the deblocking strength at each block can be non-identical, depending on the reliability of the reconstructed pixels. Test results show that the proposed filter not only improves subjective quality by reducing the coding artifacts considerably, but also gains rate distortion performance.

• 한국건축시공학회지
• /
• 제7권3호
• /
• pp.123-130
• /
• 2007

This study investigated the fundamental properties and shrinkage properties of high performance concrete with water/binder ratio of 0, 30 and with combination of expansive additive and shrinkage reducing agent. According to the results, the fluidity of high performance concrete showed lower the using method in combination with expansive additive and shrinkage reducing agent than the separately using method of that, so the amount of superplasticizer increased when the adding ratio of expansive additive and shrinkage reducing agent increased. However the air content of concrete increased when used in combination with expansive additive and shrinkage reducing agent, so the amount of AE agent decreased. The compressive strength showed the highest at 5% of expansive additive, and decreased with an increase of the amount of shrinkage reducing agent. Furthermore, in order to reduce the shrinkage of high performance concrete, it was found that the using method in combination with expansive additive and shrinkage reducing agent was more effective than separately using method of that. Autogenous shrinkage was predicted using JCI model. Because JCI model is unable to consider the effect of EA and SRA, correction factor should be added to enhance the accuracy.

• Steel and Composite Structures
• /
• 제24권4호
• /
• pp.467-479
• /
• 2017

The stud is one of the most frequently used shear connectors which are important to the steel-concrete composite action. The static and fatigue behavior of stud in the steel fiber reinforced concrete (SFRC) were particularly concerned in this study through the push-out tests and analysis. It was for the purpose of investigating and explaining a tendency proposed by the current existing researches that the SFRC may ameliorate the shear connector's mechanical performance, and thus contributing to the corresponding design practice. There were 20 test specimens in the tests and 8 models in the analysis. According to the test and analysis results, the SFRC had an obvious effect of restraining the concrete damage and improving the stud static performance when the compressive strength of the host concrete was relatively low. As to the fatigue aspect, the steel fibers in concrete also tended to improve the stud fatigue life, and the favorable tensile performance of SFRC may be the main reason. But such effect was found to vary with the fatigue load range. Moreover, the static and fatigue test results were compared with several design codes. Particularly, the fatigue life estimation of Eurocode 4 appeared to be less conservative than that of AASHTO, and to have higher safety redundancy than that of JSCE hybrid structure guideline.

• 터널과지하공간
• /
• 제21권5호
• /
• pp.359-369
• /
• 2011

본 연구에서는 굴착 전 후에 채취한 암석시료들에 대해 물리적, 역학적 그리고 열적 물성을 조사하여, KAERI Underground Research Tunnel(KURT)의 건설로 인해 발생된 굴착손상영역(EDZ)을 정량적으로 평가하고자 하였다. 굴착손상영역에서 공극률은 약 140% 정도 증가하였고, 탄성파속도, 탄성계수, 그리고 일축압축강도는 각각 약 11, 37, 그리고 16% 정도 감소하였다. 또한 굴착손상영역에서의 열전도도는 약 20% 정도 감소하였다. 암석물성변화를 이용하여 KURT 굴착손상영역의 범위를 판단한 결과 약 1.1-2.4 m로 나타났다.