• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권5호
• /
• pp.426-429
• /
• 2006

The fibroblast in the periodontal ligaments received various stress. Among them, compression and tension are quite important and they are related to the remodeling of tooth and alveolar bone. We studied the change of expression of interleukin-6 (IL-6) and interleukin-8 (IL-8) in the fibroblasts of the periodontal ligaments by real-time RT-PCR and ELISA. In results, the relative activity of IL-6 mRNA in 2 hours after was 1.54${\pm}$0.08 and 1.00${\pm}$0.05 in control and test, respectively (P<0.05). Its 12 hours after was 1.23${\pm}$0.06 and 2.78${\pm}$0.14 in control and test, respectively (P<0.05). The relative activity of IL-8 mRNA in 2 hours after was 1.00${\pm}$0.05 and 0.24${\pm}$0.01 in control and test, respectively (P<0.05). Its 12 hours after was 1.23${\pm}$0.06 and 0.63${\pm}$0.03 in control and test, respectively (P<0.05). The concentration of IL-6 was 1.02${\pm}$0.16 ng/ml, 0.90${\pm}$0.14 ng/ml, and 1.32${\pm}$0.12 ng/ml (P<0.05) in control, 2, and 12 hours after, respectively. The concentration of IL-8 was 2.26${\pm}$0.17 ng/ml, 1.70${\pm}$0.26 ng/ml (P<0.05), and 0.84${\pm}$0.47 ng/ml (P<0.05) in control, 2, and 12 hours after, respectively. In conclusion, the expression of IL-6 was significantly increased after the application of the static compressive force, but IL-8 was significantly decreased. Considering their known function, their expression is quite important in tooth and bone resorption.

• 대한의용생체공학회:의공학회지
• /
• 제24권4호
• /
• pp.363-367
• /
• 2003

인공무릎관절의 수명에 직접적인 영향을 주는 인자는 접촉면에 대한 접촉면적과 압력분포이다 따라서. 이에 대한 실험적인 평가가 필요하였고 knee simulator 혹은 K-scan sensor를 포함한 시스템과 같은 많은 연구가 진행되어 왔다. 그러나 지금까지 보행주기에 따른 연속적인 인공관절 운동에 대한 접촉면의 압력분포를 실시간으로 분석한 연구는 미흡하다 따라서 본 연구의 목적은 보행주기를 모사하는 simulator와 I-scan을 이용하여 연속적인 동작에 따른 접촉면의 압력분포를 분석함에 있다. 본 연구의 목적을 이루기 위해서 생체내 인공관절 환경을 정확히 표현할 수 있는 knee simulator를 제작하였다. 네 방향의 자유도를 갖고 있는 본 simulator는 soft tissue의 기능을 포함하고 있고 PC Program을 통하여 압축하중과 femoral component의 굴곡각을 조절할 수 있다. 본 시스템의 I-scan sensor는 보행주기에 따른 압력분포를 분석할 수 있다. 보행주기에 대한 압력분포는 압축하중곡선에 따라 주요하게 변화함을 알 수 있고 운동성에 영향을 쿠는 압력중심의 위치도 변한다는 것을 알 수 있다. 따라서 본 연구에서 제작한 knee simulator는 보행주기 같은 특정의 운동정보를 이용하여 접촉면의 압력분포 및 운동성 같은 기계적 성능을 평가할 수 있고 형상 설계를 위한 기초 자료를 제공할 수 있다.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.47-53
• /
• 2003

The development of new materials with light weight and high strength has become vital to the machinery, aircraft and auto industries. However, there are a lot of problems with developing such materials that require such expensive tools, as well as a great deal of time and effort. Therefore, the improvement of fatigue life through, the adoption of residual stress, is the main focus. The compressive residual stress was imposed on the surface according to each shot velocity(1800, 2200, 2600, 3000rpm) based on Shot-peening, which is the method of improving fatigue life and strength. By using the methose mentioned above, we arrived at the following conclusions; 1. The fatigue crack growth rate(da/dN) of the Shot-peened material was lower than that of the Un-peened material. In stage I, $\Delta$K$_{th}$, the threshold stress intensity factor, of the shot-peen processed material is high in critical parts, unlike the Un-peened material. Also m, fatigue crack growth exponent and number of cycle of the Shot-peened material was higher than of the Un-peened material. That is concluded from effect of da/dN. 2. Fatigue life shows more improvement in the Shot-peened material than in the Un-peened material. Compressive residual stress of the surface on the Shot-peen processed operate resistance force of fatigue crack propagation.

• 한국강구조학회 논문집
• /
• 제25권5호
• /
• pp.475-486
• /
• 2013

본 연구는 압축가새의 변형을 FLD부분에 집중시켜 압축가새의 좌굴안정성을 확보하는 슬릿형 FLD에 관한 것이다. 4개 및 8개의 슬릿형 실험체를 슬릿길이 별로 단순압축실험하였다. 그 결과를 유한요소해석과 비교 검토하여 해석의 유효성을 입증하였다. 또한 전단면을 구성하는 단위요소를 이상화된 샌드위치 단면으로 치환하여, 슬릿개수와 슬릿길이를 변수로 하는 압축력과 축방향 변형의 관계식을 유도하였다. 이 식은 주어진 범위 내에서 실험결과와 좋은 대응을 보인다. 본 연구는 FLD설계의 기본데이터로써 이용 될 수 있다.

• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.1-9
• /
• 2017

Shot peening is a cold surface treatment employed to induce residual stress field in a metallic component beneficial for increasing its fatigue strength. The experimental investigation of parameters involved in shot peening process is very complex as well as costly. The most attractive alternative is the explicit dynamics finite element (FE) analysis capable of determining the shot peening process parameters subject to the selection of a proper material's constitutive model and numerical technique. In this study, Ansys / LS-Dyna software was used to simulate the impact of steel shots of various sizes on an aluminium alloy plate described with strain rate dependent elasto-plastic material model. The impacts were carried out at various incident velocities. The influence of shot velocity and size on the plastic deformation, compressive residual stress and force-time response were investigated. The results exhibited that increasing the shot velocity and size resulted in an increase in plastic deformation of the aluminium target. However, a little effect of the shot velocity and size was observed on the magnitude of target's subsurface compressive residual stress. The obtained results were close to the published ones, and the numerical models demonstrated the capability of the method to capture the pattern of residual stress and plastic deformation observed experimentally in aluminium alloys. The study can be quite helpful in determining and selecting the optimal shot peening parameters to achieve specific level of plastic deformation and compressive residual stress in the aluminium alloy parts especially compressor blades.

• 콘크리트학회논문집
• /
• 제15권2호
• /
• pp.323-334
• /
• 2003

비선형정적해석과 같은 성능기초설계를 위해서는 부재의 비선형거동을 정확하게 예측하여야 한다. 본 연구에서는 단부횡보강된 구조벽의 휨모멘트-곡률관계를 구하는 방법을 개발하기 위하여 해석연구를 실시하였다. 비선형해석을 수행하여 수직방향 철근의 배치형태와 단부횡보강 길이의 변화에 따른 구조벽체의 거동특성과 파괴 메카니즘의 변화를 연구하였다. 분석결과, 적절하게 횡보강된 벽체의 최대강도는 비횡보강 콘크리트가 극한 압축변형율에 도달하는 경우에 발생한다. 단부집중배근을 갖는 벽체에서는 취성파괴가 일어나며, 웨브의 수직철근은 연성파괴를 유도하는 역할을 한다. 이러한 연구결과에 근거하여 다양한 배근형태를 갖는 벽체에 대한 모멘트-곡률관계를 정의하였다. 이 제안된 관계에 따르면 단부횡보강된 구조벽체의 변형능력은 재하된 압축력에 비하여 횡보강 콘크리트의 압축재하능력이 증가할수록 증가한다.

• 농업과학연구
• /
• 제43권3호
• /
• pp.432-440
• /
• 2016

The consumption of pre-treated vegetables (including fresh-cut vegetables) that are washed, peeled, and trimmed has been significantly increased because of their easy use for cooking. Vegetable cutting machines have been widely utilized for producing fresh-cut vegetables or agricultural products of different sizes; however, the design standard is not established for specific types of agricultural products. Therefore, this study was conducted to determine mechanical properties (compressive and shear forces) of targeted agricultural products (radish, carrot, squash, cucumber, shiitake mushroom, and sweet potato) for developing a multipurpose vegetable cutting machine. According to ASAE standard (s368.3), compressive and shear forces of targeted agricultural products were measured by using a custom built UTM (universal testing machine). Shape type of samples and speed ranges (5 - 15 mm/min) of loading rate on bioyield and shear points varied depending on the targeted agricultural product. The range of averaged bioyield points of targeted agricultural products were between 7.89 and 146.98 N. On the other hand, their averaged shear points ranged from 22.50 to 53.47 N. Results clearly showed that the bioyield and shear points of targeted agricultural products were thoroughly affected by their components. As measuring compressive and shear forces of a variety of agricultural products, it will be feasible to calculate blade cutting force for designing multipurpose vegetable cutting machine.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.409-412
• /
• 2004

Over last decade extensive researches have been undertaken on the strength behaviour of Fiber Reinforced Concrete(FRC) structures. But the use of Ultra-High Strength Steel Fiber Cementitious Concrete Composites is in its infancy and there is a few experiments, analysis method and design criteria on the structural elements constructed with this new generation material which compressive strength is over 150 MPa and characteristic behaviour on the failure status is ductile. The objective of this paper is to investigate and analyze the behaviour of reinforced rectangular structural members constructed with ultra high performance cementitious composites (UHPCC). This material is known as reactive powder concrete (RPC) mixed with domestic materials and its compressive strength is over 150MP. The variables of test specimens were shear span ratio, reinforcement ratio and fiber quantity. Even if there were no shear stirrups in test specimens, most influential variable to determine the failure mode between shear and flexural action was proved to be shear span ratio. The characteristics of ultra high-strength concrete is basically brittle, but due to the steel fiber reinforcement behaviour of this structure member became ductile after the peak load. As a result of the test, the stress block of compressive zone could be defined. The proposed analytical calculation of internal force capacity based by plastic analysis gave a good prediction for the shear and flexural strength of specimens. The numerical verification of the finite element model which constitutive law developed for Mode I fracture of fiber reinforced concrete correctly captured the overall behaviour of the specimens tested.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.313-318
• /
• 2003

The development of new materials with light weight and high strength has become vital to the machinery, aircraft and auto industries. However, there are a lot of problems with developing such materials that require expensive tools, and a great deal of time and effort. Therefore, the improvement of fatigue strength and fatigue life are mainly focused on by adopting residual stress(in this thesis). The compressive residual stress was imposed on the surface according to each shot velocity(57, 70, 83, 96 m/sec) based on Shot-peening, which is the method of improving fatigue lift: and strength. By using the methods mentioned above, I arrived at the following conclusions 1. The fatigue crack growth rate(da/dN) of the Shot-peened material was lower than that of the Un-peened material. And in stage I, ${\Delta}K_{th}$, the threshold stress intensity factor, of the shot-peen processed material is high in critical parts unlike the Un-peened material. Also m, fatigue crack growth exponent and number of cycle of the Shot-peened material was higher than that of the Un-peened material. That is concluded from effect of da/dN. 2. Fatigue life shows more improvement in the Shot-peened material than in the Un-peened material. And compressive residual stress of surface on the Shot-peen processed operate resistance force of fatigue crack propagation.

• 한국방재학회 논문집
• /
• 제11권3호
• /
• pp.9-15
• /
• 2011

압축강도 100 MPa, 140 MPa 초고강도 섬유보강 콘크리트 직사각형보와 기하하적 조건 및 PS힘이 동일한 160 MPa RPC 직사각형보의 휨거동 비교를 통하여 압축강도가 낮은 초고강도 섬유보강 콘크리트 구조물의 거동 특성을 파악하였다. 직사각형보에 철근은 배근되지 않았으며 실험변수로는 강섬유, 콘크리트 압축강도, 프리스트레스 도입 방식, PS강재비 등이다. 모멘트-곡률관계와 하중-처짐관계를 통하여 압축응력이 작은 UHPC 직사각형보의 거동 특징을 분석하였다. 초고강도 섬유보강 콘크리트에 대한 간단한 형태의 응력-변형률 관계를 제안하였으며 이를 이용하여 UHPC 직사각형보에 대한 모멘트-곡률관계를 산정하였다. 실험에 의한 모멘트-곡률관계를 비교한 결과 상당히 일치함을 알 수 있었다.