• Journal of the Korean Wood Science and Technology
• /
• v.49 no.6
• /
• pp.541-549
• /
• 2021

This paper reports a method to evaluate the residual strength of insect-damaged radiata pine lumber, such as the screw withdrawal strength as a semi-destructive method and a compression parallel to the grain test to assess the density changes after exposure to outdoor conditions. The screw withdrawal strength test was used as a semi-destructive method to estimate the residual density of decayed lumber. A compression parallel to the grain test was applied to evaluate the residual density. Three variables, such as the screw withdrawal strength, compression parallel to the grain, and residual density, were analyzed statistically to evaluate their relationships. The relationship between the residual density and screw withdrawal strength showed a good correlation, in which the screw withdrawal strength decreased with decreasing density. The other relationship between the residual density and compression parallel to the grain was also positively correlated; the compression parallel to the grain strength decreased with decreasing density. Finally, the correlation between the three variables was statistically significant, and the mutual correlation coefficients showed a strong correlation between the three variables. Hence, these variables are closely correlated. The test results showed that the screw withdrawal strength could be used as a semi-destructive method for an in situ estimation of an existing wood structure. Moreover, the method might approximate the residual density and compression parallel to the grain if supplemented with additional data.

• Journal of the Korea Furniture Society
• /
• v.12 no.1
• /
• pp.21-26
• /
• 2001

This study was carried out to get some basic information on mechanical properties of Platanus orientalis L. for the rational utilization of this wood. Relationship of anatomical characteristics with compression strength parallel to grain was analyzed using stepwise regression technique. All possible combination of 8 independent variables were regressed on compression strength parallel to grain. The summarized results in this study were as follows: 1. The compression strength parallel to grain increased with the increase of wood fiber length and wood fiber width. The strength, however, decreased with increase of number of pore per $\textrm{mm}^2$ and tangential diameter of pore. 2. The major factors affecting compression strength parallel to grain in heartwood were length of wood fiber and number of pore $per{\;}{\textrm{mm}^2}$ but width of wood fiber and length of vessel element were the important factors in sapwood.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.63-69
• /
• 1998

This study was carried out to get some basic information on mechanical properties of Korea Lepidobalanus for rational utilization of wood. Five species of Quercus variabilis, Q. aliena, Q. serrata, Q. mongolica, Q. acutissima belong to Lepidobalanus were investigated in this research. Relationship of anatomical characteristics to compression strength parallel to grain was analyzed using stepwise regression technique. All possible combination of 21 independent variables were regressed on compression strength parallel to grain. The summarized results in this study were as follows: I. In the proportion of wood structural elements, the factors that had the greatest influence on compression strength parallel to grain appeared to be proportion of ray in earlywood in Q. variabilis and Q. acutissima, proportion of wood fiber in latewood in Q. aliena and Q. serrata and proportion of vessel in earlywood in Q. mongolica respectively. 2. In the size of wood element and its structure, the factors that had the greatest influence on compression strength parallel to grain were microfibril angle in Q. variabilis, Q. serrata and Q. mongolica and length of wood fiber in Q. aliena and Q. acutissima.

• Journal of the Korea Furniture Society
• /
• v.17 no.4
• /
• pp.49-57
• /
• 2006

Larix kaemferi is now a major economic kind of trees and is produced in large quantity every year. Thus, the study of Larix kaemferiis conducted to acquire the basic date of measures for the reasonable use, clarifying the relation with the compression strength parallel to grain according to anatomical properties by heartwood and sapwood, and earlywood and latewood. As the length of an earlywood tracheid and the radial wall thickness of earlywood and latewood tracheids increased, the compression strength rose, and as the height of uniseriate ray in cell number increased, the compression strength parallel to grain fell. The major anatomical factors effecting on the compression strength parallel to grain of heart wood were the radial wall thickness of a latewood tracheid and the length of a latewood tracheid, while in sapwood, the length of an earlywood tracheid and the radial wall thickness of earlywood and latewood tracheids were the major factor on it.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.27-32
• /
• 1997

This study was carried out to find the relationship between anatomical characters and compression strength parallel to grain of Pinus densiflora S. et. Z., the representative conifer species in Korea. The results were as follows ; 1. The compression strength parallel to grain increased with the increase of tracheid length and wall thickness. The strength, however, decreased with the increase of height of uniseriate ray and microfibril angle. 2. The major factors affecting compression strength parallel to grain in heartwood were radial diameter of latewood tracheid and wall thickness of earlywood tracheid but length and tangential diameter of latewood tracheid were the important factors in sapwood.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.5
• /
• pp.465-473
• /
• 2009

Three failure theories were studied to evaluate the wood strength variation with grain slope. Maximum stress theory, Tsai-Hill theory and Hankinson formula were presented to hypothesize the failure of wood according to grain slope to loading direction. Red pine and Japanese larch were used as materials to simulate failure strength prediction with grain slope. Calculation of strength results was that the strength of wood drops rapidly between parallel to grain orientation (0 degree) and 15 degree grain orientation. The strength of wood with grain orientation were somewhat different at small grain angles among failure theories, and this tendency was due to tension and compression distinction, and shear accounting in each theories. For the above 45 degree grain orientation, the predicted failure strength of wood with grain variation were very close in each failure theories and were useful in assessing failure strength of wood. The applicable these theories should be considered that the wood has different behavior in tension and compression, and this lead to different strength at small grain angles in each theories. Furthermore, reconsideration is needed to assess the failure strength of wood at small grain angles in Hankinson formula and further studies are necessary to accounting for shear behavior at small grain angles.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.12-17
• /
• 1996

This study was carried out to investigate some mechanical properties for wood rational utilization of heartwood and sapwood in radiata pine according to basic density, ring width and proportion of latewood which were grown in New Zealand. This result were summarized as follow: Heartwood showed 35.78(MPa) of the compression strength parallel to the grain while sapwood showed 42.08(MPa). The modulus of rupture in static bending was higher in sapwood showing 86.12(MPa) than in heartwood 72.99(MPa) Heartwood had 7.38(GPa) for the modulus of elasticity in static bending and sapwood 8.17(GPa). As the basic density and proportion of latewood increased: compression strength parallel to the grain, MOR and MOE in static bending had a tendency to increase. As ring width increased, the mechanical properties decreased.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.61-69
• /
• 2008

To examine the compression properties of structural members, the compression and bearing tests were conducted in parallel- and perpendicular-to-grain loading using domestic Japanese larch (Larix kaempferi (Lamb.) Carriere). Compression (bearing) properties with the length of a specimen and the contact length of the bearing plate were investigated, and deformations at each specimen length from the point of bearing force were measured to evaluate the effective end distance tabulated in the present practice (Korean Building Code). Compression (bearing) properties varied with the size of the bearing plate, and the end distance for dowel-type fastener taken into consideration of the specimen's deformation, for the safe design, should be applied with over 7 D.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1312-1317
• /
• 1993

Rattan has found various engineering application, especially in furniture industry, however its potential engineering application has not been fully realized because of lack of information of its mechanical properties . It is therefore the objective of this paper is to report some of the recent research work conducted to investigate some of mechanical properties of rattan. The principal tests performed were compression strength parallel to grain in green and dry conditions.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.2
• /
• pp.157-174
• /
• 2024

This study investigates the influence of varying concentrations of boric acid (BA) preservative on the physical and mechanical properties of light red meranti (LRM) found in Sarawak. LRM or Shorea leprosula samples were treated with various concentrations of BA via the dip diffusion method using American Society for Testing and Materials (ASTM) standards. The physical property, particularly the retention rate and mechanical properties, bending strength, modulus of elasticity (MOE), tensile and compression strength parallel to grain of impregnated and control samples were tested to determine the effects of BA preservative. The retention rate was found to increase with increasing BA concentration and higher surface area to volume ratio. The mechanical properties in terms of the MOE and tensile strength parallel to grain were found to be greater than those of the control samples, whereas the bending strength and tensile strength parallel to grain were lower. Amongst the results, only the retention rate and MOE showed significant interaction effects at 5% level of significance between all factors tested (samples size and BA concentration for retention rate and BA concentration for MOE).