• 한국의류학회지
• /
• 제40권2호
• /
• pp.240-257
• /
• 2016

This study determines the effect of 3D compression pants and Kinesio taping on muscular function of the leg during knee joint flexion and extension. Eight males participated in the experiment, wearing basic pants (BP), Kinesio taping on bare skin (KT), 3D compression pants with (KTP) and without Kinesio taping (CP). The test protocol for isokinetic muscular function was composed of four sets at three angular velocities (60, 180, $240^{\circ}/sec$) using Cybex 660. Peak torque and work per repetition of the lower limbs of eight males were analyzed from the result of Cybex. Agility and power of the subjects were examined from side step and sergeant jump. Peak torque, average power, work per repetition, force decay time of subjects wearing CP and KTP were significantly better than BP or KT, especially at low angular velocity of $60^{\circ}/sec$. The time to generate peak torque of subjects wearing BP was the longest, while the force-decay time of BP was the shortest. The application of Kinesio tape on skin did not increase muscle peak torque, work and power, but did shorten the time to generate peak torque.

• 한국의류학회지
• /
• 제27권8호
• /
• pp.883-891
• /
• 2003

In this study, a change of hand of fabrics dyed with persimmon juice was measured using Kawabata Evaluation System. Using various cotton fabrics, linen fabric and silk fabric used frequently for persimmon juice dyeing, we examined the changes of physical properties and hand according to persimmon juice dyeing and washing. The dynamic characteristics of hand were measured tensile, shear, bending, compression, surface properties, thickness and weight. Linearity of load-extention and tensile resilience were increased in all kinds of fabrics after dyeing. Tensile energy decreased in cotton fabric 2(gauze), cotton fabric 3(muslin) and linen fabric. Shear stiffness and hysteresis of shear increased in most of fabrics. Bending rigidity of the bending property and hysteresis of bending, linearity of compression of the compression property, compression energy and compression resilience increased in all kinds of fabrics after dyeing. Thickness and weight increased much in all kinds of fabrics after dyeing. In the primary hand value, stiffness and anti-drape stiffness increased in all kind of fabrics after dyeing. The fullness and softness, crispness, scrooping feeling and flexibility with soft feeling decreased. As the stiffness after persimmons dyeing increased, it was suitable for clothes material of summer.

• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.17-26
• /
• 2019

This research aims to obtain useful data on the development of compression garment products with high-stretch knitted materials. Using nylon SCY, four specimens were knitted. Then, appearance (width, length, weight, thickness), stretch property (stretch, recovery) and clothing pressure were measured and their interrelation was analyzed. In the comparison of appearance features, yarn floating caused shrinkage in both course and wale directions of the specimens. Yarn overlapping by tucking caused a release in the course direction and shrinkage in the wale direction. Also, structural change was affected by the weight and thickness change of the knitted fabric. In the analysis of fabric stretch, yarn floating reduced the extension in course direction and increased that in wale direction of the knitted fabric. However, yarn overlapping reduced the elongation in both directions. In the analysis of recovery, yarn floating and overlapping raised fabric recovery in both directions, and tuck structure was superior to float in recovery. In the analysis of clothing pressure, 'Plain-Float' structured fabrics showed a higher clothing pressure than 'Plain' and the clothing pressure value of 'Plain-Tuck' was lower than that of 'Plain'. As for the correlation between fabric appearance, stretch property, and clothing pressure, the appearance change in course direction had a major influence on the clothing pressure. The shrinkage of appearance led to a decrease in stretch and an increase in clothing pressure.

• 한국의류학회지
• /
• 제42권4호
• /
• pp.612-625
• /
• 2018

This study designed 16 kinds of basic structure and 4 kinds of modified structure for impact protection pads with a spacer fabric shape. The pad is a structure in which hexagonal three-dimensional units, composed of a surface layer and a spacer layer, are interconnected. Designed pads were printed with flexible $NinjaFlex^{(R)}$ materials using a FDM 3D printer. The printed pads were evaluated for impact protection performance, compression properties and sensory properties. The evaluation of the impact protection performance indicated that basic structures better than CR foam material at 20cm height were DV1.5, DX1.5, DX1.0, DV1.0 and HV1.5. The evaluation of the compression properties for the five types, with good results in the impact protection performance, indicated that DV1.0, DX1.0, DV1.5, HV1.5 and DX1.5 showed good results, respectively. The sensory evaluation of DV1.0, DX1.0, and DV1.5, which with good results when considering both the impact protection performance and the compression performance, showed that DV1.0 were the best for surface, flexibility, compression and weight. Therefore, DV1.0 is shown to be the best structure for protection pads.

• 한국염색가공학회지
• /
• 제23권1호
• /
• pp.60-68
• /
• 2011

The effect of compression wear for sport performance and muscle function was investigated based on the physiological test and electromyograph(EMG). The EMG test was used to study muscle activity after fitting the compression wear during exercise. It showed slight difference between men and women testee groups in the results of anaerobic, aerobic, fatigue, and EMG test due to muscle content in the body. In addition, the exercise performance was increased to some extent even the muscle activity was decreased. It is estimated that the compression effect to muscle by the compression wear decreased the muscle vibration and improved blood circulation which helped the entire sport performance. However, it is necessary to study the effect of compression wear in long-term wearing in the future study.

• Fibers and Polymers
• /
• 제6권4호
• /
• pp.322-331
• /
• 2005

Graduated compression stockings (GCS) have been widely used for the prophylaxis and treatment of venous diseases. Their gradient pressure function largely related to their fabric structure and material properties. By combing fabric physical testing and wear trials, this study investigated the GCSs fabric structure and material properties at different locations along the stocking hoses, and quantitatively analyzed the effects of fabrics on skin pressure longitudinal and transverse distributions. We concluded that, Structural characteristics and material properties of stocking fabrics were not uniform along the hoses, but a gradual variation from ankle to thigh regions, which significantly influenced the corresponding skin pressure gradient distributions; Tensile (WT, EM) and shearing properties (G) generated most significant differences among ankle, knee and thigh regions along the stocking hose, which significantly influenced the skin pressure lognitudinal gradient distribution. More material indices generating significant gradual changes occurred in the fabric wale direction along stocking hose, meaning that materials properties in wale direction would exert more important impact on the skin pressure gradient performances. And, the greater tensibility and smoother surface of fabric in wale direction would contribute to put stocking on and off, and facilitate wearers' leg extension-flexion movements. The indices of WT and EM of stocking fabrics in series A have strong linear correlations with skin pressure lognitudinal distribution, which largely related to their better performances in gradual changes of material properties. Skin pressure applied by fabric with same material properties produced pronounced differences among four different directions around certain cross-sections of human leg, especially at the ankle region; and, the skin pressure magnitudes at ankle region were more easily influenced by the materials properties, which were considered to be largely related to the anatomic structure of human leg.

• 한국의류산업학회지
• /
• 제19권1호
• /
• pp.61-69
• /
• 2017

The purpose of this study is to suggest the sizing system of medical compression stockings for Korean adult men in order to develop compression stockings with excellent dimensional fit reflecting the real human body data. Analyses were conducted on the raw data that the subjects consist of 19~60 aged men of Size Korea 2010 in this study. The stature and weight for the pantyhose stockings, and the ankle circumference and calf circumference for the thighs, knees, and calf support types of stockings were selected as the basic dimension items. The size interval of the pantyhose stockings were 2cm in stature and 2kg in weight. In addition, the thigh, knee, and calf support types of stockings were set with ankle circumference and calf circumference set at 1cm intervals. The designation is the same as KS pantyhose standard, S, M, L, XL. As a result, in the case of pantyhose compression stockings for men, the coverage ratio showed 97.2% in total, with 46.3% for M, 36.5% for L, 7.4% for S, and 6.9% for XL. In the case of thigh type, knee type and calf support types, the percentage of coverage was 99.96% in total, with 57.6% in M, 31.1% in L, 4.7% in S, and 1.6% in XL. The results of this study would help to improve the dimensional conformity of the medical compression stockings for Korean adult men.

• 한국생활과학회지
• /
• 제11권1호
• /
• pp.79-93
• /
• 2002

The purpose of this study was to determine the effect of dynamic characteristics of knitted fabrics on the clothing pressure of foundation. Five knitted fabrics of foundation were selected by different fiber types and blended ratios for the study. The dynamic characteristics of foundation wears made with five different fabrics were measured by KES-FB system method. The results of this study were as follows: 1. The tensile linearity and resilience of f1 were lower than those of other samples. While the tensile resistances of f1, f2 and f4 samples were high, the coefficients of friction of them were low. The bending rigidity and geometric roughness of f5 were higher than the others. 2. The clothing pressure of f3 all-in-one sample was the highest, and followed by f5, f4, f2 and f1, respectively. This result showed that the compression resilience affected on the clothing pressure greatly. 3. In terms of the clothing pressure by posture, the clothing pressure at $90^{\circ}$ bending posture was the highest and followed by that at standing and one-leg-up, respectively. The back part of abdomen was pressured most at $90^{\circ}$ bending posture.

• 한국의류학회지
• /
• 제33권8호
• /
• pp.1273-1279
• /
• 2009

This study examined the difference in the mechanical properties of cotton fabrics treated with nano silver. Nano silver powder, UV-absorber, and DMDHEU are applied to cotton fabrics. The reagents added in a finishing solution were Triton X-100 and $MgCl_2$ $6H_2O$. The mechanical properties of the fabrics were measured by KES-FB system. From these, the primary hand values were evaluated by the conversion equation (KN-202-DS). The results of this study are summarized as follows. The fabric tensile properties and bending properties are increased by the application of nano silver, DMDHEU, and UV-absorber mixed. The values of tensile properties in the warp direction were significantly lower than those in the weft direction. However, the values of bending properties in the warp direction were higher than those in the weft direction. The differences in the values of compression parameters by nano silver coating were unnoticeable. However, the compression energy and resilience of compression in each fabric was increased by DMDHEU treatment. The SMD values of cotton fabrics are decreased by nano silver, DMDHEU, and UV-absorber mixed treatment.

• 한국의류학회지
• /
• 제46권4호
• /
• pp.624-637
• /
• 2022

The purpose of this study was to develop a compression inner layer (CIL) that can be attached to dress shirts for men who have gynecomastia (male breast enlargement). For this, we developed shirts with CIL prototypes based on the functional, expressive, and aesthetic (FEA) consumer needs model. The user-centered design principle guided the design process. Based on size measurements, in-depth interviews, and an online survey, the design requirements for dress shirts with a CIL were determined, and the prototype was developed. The dress shirts were constructed of polyester and spandex mixed materials, while the CIL was made of thin mesh fabric knitted from 80% polyester and 20% spandex. A CIL prototype was developed with a front zipper fastening to hold the upper body tight and compress the breast area. The CIL was attached by connecting a strap with snap buttons to loops sewn into the shoulder line of the dress shirt. In the trial and sensory test, the prototype helped breast size decrease while meeting target consumer needs. The outcomes of this study provide necessary insights to develop garments for gynecomastia patients.