• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.331-336
• /
• 2002

Recently the critical nozzles with small diameter are being extensively used to measure mass flow in a variety of industrial fields and these have different configurations depending on operation condition and working gas. The curvature radius of the critical nozzle throat is one of the most important configuration factors promising a high reliability of the critical nozzle. In the present study, computations using the axisymmetric, compressible, Navier-Stokes equations are carried out to investigate the effect of the nozzle curvature on critical flows. The diameter of the critical nozzle employed is D=0.3mm and the radius of curvature of the critical nozzle throat is varied in the range from 1D to 3D. It is found that the discharge coefficient is very sensitive to the curvature radius(R) of critical nozzle, leading to the peak discharge coefficient at R = 2.0D and 2.5D, and that the critical pressure ratio increases with the curvature radius.

• 대한기계학회논문집B
• /
• 제23권10호
• /
• pp.1229-1239
• /
• 1999

A computational study on unsteady compressible flows has been performed by adopting a low Reynolds number $k-{\omega}$ turbulence model in conjunction with dual time stepping scheme. An explicit four-stage Runge-Kutta scheme for the Navier-Stokes equations and an approximate factorization scheme for the $k-{\omega}$ turbulence model equations are used. Computational results obtained for blade surface pressure distributions in the process of rotor-stator interaction in a turbine stage are in good agreement with extant experimental data. The effects of the wake from the stator on the boundary-layer transition over the rotor blade surface are discussed by showing that high intensity turbulence of the stator wake induces an early transition.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.538-543
• /
• 2003

Perforated wall has long been employed to control a variety of flow phenomena. It has been, in general, characterized by a porosity of the perforated wall. However, this porosity value does not take account of the number and detailed shape of porous holes, but is defined by only the ratio of the perforated area to total wall surface area. In order to quantify the porous wall effects on the flow control performance, an effective porosity should be known with the detailed flow properties inside the porous holes. In the present study, a theoretical analysis using a small disturbance method is performed to investigate detailed flow information through porous hole and a computational work is also carried out using the two-dimensional, compressible Navier-Stokes equations. Both the results are compared with existing experimental data. The gasdynamical porosity is defined to elucidate the effect of perforated wall.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.167-173
• /
• 2003

For the measurement of mass flow rate at a wide range of operation conditions, it is required that the critical nozzle gas different diameters, since the mass flow rate through the critical nozzle depends on the nozzle supply conditions and the nozzle throat diameter. In the present study, both computational and experimental investigations are performed to explore the variable critical nozzle. Computational work using the 2-dimensional, axisymmetric, compressible Navier-Stokes equations are carried out to simulate the gas flow through variable critical nozzle. In experimnet, a cylinder with several different diameters is inserted into the critical nozzle to vary the nozzle throat diameter. Computational results are compared with the experimented ones. The computed results are in close agreement with experiment. It is found that the displacement and momentum thickness of variable critical nozzle are given as a function of Reynolds numbers. The discharge coefficient of the variable critical nozzle is predicted using an empirical equation.

• 한국항공우주학회지
• /
• 제40권5호
• /
• pp.375-384
• /
• 2012

본 연구에서는 초음속 비행체에 나타나는 유동 특성 해석을 위해 1988 Wilcox $\mathcal{k}-{\omega}$ 모델과 2008 Wilcox 모델의 수치 결과를 비교하였다. 충격파 - 경계층 간섭 현상과 램프 주입기 혼합 문제에 대하여 실험결과와 비교, 검토하였다. 또한, 표면 마찰 측정의 기초가 되는 평판 흐름과 전단 층 성장에 대한 상관 관계식도 비교, 분석 하였다. 램프 주입기 케이스에서 최대 주입 질량비는 1988 Wilcox 모델을 이용하였을 때 보다 신뢰성 있는 해석 결과를 예측할 수 있었다. 그러나 충격파 - 경계층 간섭 케이스에 대해서는 2008 Wilcox 모델을 적용하였을 때 더 정확한 해석 결과가 도출됨을 확인하였다.

• Advances in aircraft and spacecraft science
• /
• 제9권5호
• /
• pp.415-431
• /
• 2022

Secondary flows have a huge impact on losses generation in modern low pressure gas turbines (LPTs). At design point, the interaction of the blade profile with the end-wall boundary layer is responsible for up to 40% of total losses. Therefore, predicting accurately the end-wall flow field in a LPT is extremely important in the industrial design phase. Since the inlet boundary layer profile is one of the factors which most affects the evolution of secondary flows, the first main objective of the present work is to investigate the impact of two different inlet conditions on the end-wall flow field of the T106A, a well known LPT cascade. The first condition, labeled in the paper as C1, is represented by uniform conditions at the inlet plane and the second, C2, by a flow characterized by a defined inlet boundary layer profile. The code used for the simulations is based on the Discontinuous Galerkin (DG) formulation and solves the Reynolds-averaged Navier-Stokes (RANS) equations coupled with the Spalart Allmaras turbulence model. Secondly, this work aims at estimating the influence of viscosity and turbulence on the T106A end-wall flow field. In order to do so, RANS results are compared with those obtained from an inviscid simulation with a prescribed inlet total pressure profile, which mimics a boundary layer. A comparison between C1 and C2 results highlights an influence of secondary flows on the flow field up to a significant distance from the end-wall. In particular, the C2 end-wall flow field appears to be characterized by greater over turning and under turning angles and higher total pressure losses. Furthermore, the C2 simulated flow field shows good agreement with experimental and numerical data available in literature. The C2 and inviscid Euler computed flow fields, although globally comparable, present evident differences. The cascade passage simulated with inviscid flow is mainly dominated by a single large and homogeneous vortex structure, less stretched in the spanwise direction and closer to the end-wall than vortical structures computed by compressible flow simulation. It is reasonable, then, asserting that for the chosen test case a great part of the secondary flows details is strongly dependent on viscous phenomena and turbulence.

• 대한기계학회논문집B
• /
• 제22권2호
• /
• pp.240-252
• /
• 1998

The purpose of this study is to develop a method for predicting the aerodynamic performance of the low speed airfoils in the 2-dimensional, steady and viscous flow. For this study, the airfoil geometry is specified by adopting the longest chord line system and by considering local surface curvature. In case of the inviscid incompressible flow, the analysis is accomplished by the linearly varying strength vortex panel method and the Karman-Tsien correction law is applied for the inviscid compressible flow analysis. The Goradia integral method is adopted for the boundary layer analysis of the laminar and turbulent flows. Viscous and inviscid solutions are converged by the Lockheed iterative calculating method using the equivalent airfoil geometry. The analysis of the separated flow is performed using the Dvorak and Maskew's method as the basic method. The wake effect is also considered by expressing its geometry using the formula of Summey and Smith when no separation occurs. The computational efficiency is verified by comparing the computational results with experimental data and by the shorter execution time.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.21-29
• /
• 2002

본 연구는 다공벽과 공동을 사용한 피동제어법을 천음속 습공기 유동에서 발생하는 충격파와 경계층 간섭에 적응하였다. 지배방정식은 액적성장 방정식과 완전히 결합된 2차원, 비정상, 압축성 Navier-Stokes 방정식이며, 3차 오더 MUSCL 타입의 TVD 기법을 사용하였다. 또 난류모델로는 Baldwin-Lomax 모델을 적용하였다. 본 연구에서 적용한 제어법의 유용성을 조사하기 위해 유동의 전압손실과 충격파 변위의 시간의존성 거동을 해석하였다. 수치계산 결과로부터 본 연구의 피동제어기법을 통해 천음속 습공기 유동에서 발생하는 충격파/경계층 간섭으로 인한 전압손실이 상당히 감소하였고, 익에서 충격파 운동을 억제하는 것으로 나타났다. 또 다공영역의 위치가 본 연구의 제어법의 효과에 상당한 영향을 준다는 것이 발견하였다.

• 한국항공우주학회지
• /
• 제40권12호
• /
• pp.1025-1031
• /
• 2012

본 연구에서는 간단한 압축성 유체이론에 기초하여 렘젯 엔진의 초음속 흡입구를 개념 설계하고 보다 넓은 범위의 운영조건에서 안정적인 성능을 내도록 블리딩 유동제어 연구를 수행하였다. 초음속 흡입구의 성능을 개선시키기 위해서는 충격파 안정성, 충격파-경계층 상호작용 및 유동 박리를 적절히 제어할 수 있어야 한다. 비점성 해석을 통해 얻어진 1차 기초설계 형상으로부터 점성을 고려하여 충격파의 강도와 경계층 및 박리의 효과가 반영된 2차 수정설계를 수행하였다. 그 결과 설계조건에서 충격파가 안정화되고 목표 흡입 유량을 만족하는 형상을 얻었다. 흡입구가 탈 설계조건 내에서도 성능이 유지되도록 하기 위해 블리딩을 적용하였다. 질량유량 경계조건을 이용하여 블리딩 효과를 모델링 하였으며 위치와 개수를 조절해가며 성능변화를 관찰하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.337-345
• /
• 2002

The present study addresses a computational result of unsteady gas flow through a critical nozzle. The axisymmetric, unsteady, compressible, Wavier-Stokes equations are solved using a finite volume method that makes use of the second order upwind scheme for spatial derivatives and the multi-stage Runge-Kutta integral scheme for time derivatives. The steady solutions of the governing equation system are validated with the previous experimental data to ensure that the present computational method is valid to predict the critical nozzle flows. In order to simulate the effects of back pressure fluctuations on the critical nozzle flows, an excited pressure oscillation with an amplitude and frequency is assumed downstream of the exit of the critical nozzle. The results obtained show that for low Reynolds numbers, the unsteady effects of the pressure fluctuations can propagate upstream of the throat of critical nozzle, and thus giving rise to the applicable fluctuations in mass flow rate through the critical nozzle, while for high Reynolds numbers, the pressure signals occurring at the exit of the critical nozzle do not propagate upstream beyond the nozzle throat. For very low Reynolds number, it is found that the sonic line near the throat of the critical nozzle remarkably fluctuateswith time, providing an important mechanism for pressure signals to propagate upstream of the nozzle throat, even in choked flow conditions. The present study is the first investigation to clarify the unsteady effects on the critical nozzle flows.