• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.774-781
• /
• 2009

The purpose of this study was to research on compressibility characteristics of waste tire powder-added lightweight soil(TLS) for recycling dredged soil, bottom ash and waste tire. The TLS used in this experiment consists of dredged soil, cement, waste tire powder and bottom ash. Test specimens were prepared with various content of waste tire powder ranged from 0% to 100% at 25% intervals by the dried weight of dredged soil. Several series of one-dimensional consolidation tests were carried out. Based on the experimental results, as the waste tire powder increased, the swelling index of TLS increased. The compression index and swelling index of the TLS with bottom ash content showed lower value than without bottom ash. Then, compressibility characteristics of TLS were strongly influenced by mixing conditions of waste tire powder content and bottom ash content.

• 한국농공학회지
• /
• 제40권2호
• /
• pp.123-129
• /
• 1998

Compressibility and permeability properties are the most important input parameters necessary to assess the suitability of core materials in seepage control system construction. To achieve this objective, an experimental investigation was conducted in the laboratory. For the bentonite-soil/sand mixes, consolidation and permeability tests were carried out in the conventional consolidation cell, 6Omm in diameter and 2Omm in height, was modified to perform a falling head type permeability test. From the results, the normalized relationship with respect to void ratio at liquid-limit state $(e_L)$, and the changes of compressibility and permeability for various bentonite-soil/sand mixes were presented. This approach will be helpful in proportioning mixes and predicting corresponding changes in engineering behavior. And it is possible to proportion a mix to arrive at the required compressibility without affecting the permeability.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.627-632
• /
• 2005

In this study, a series of large-scale oedometer tests was performed to investigate the compressibility of rock fill materials. The testing samples were prepared to have three different grain size distributions and for each distribution, exist in two different states(dried and saturated). The test results indicated that particle breakages occurred mainly for the particles larger than 4.75mm in size and increased with increasing grain sizes. Also, it was found that, for a dry sample as it became well-graged, its compressibility decreased and accordingly, its tangent constrained modulus increased. A comparion between the samples in dry and saturated states revealed that compressibility of the materials increases with increasing water content. The values of tangent constrained modulus calculated for the tested dry samples were larger by about 10 to 20%, on average, than those for the saturated samples.

• 한국지반환경공학회 논문집
• /
• 제9권3호
• /
• pp.61-68
• /
• 2008

압밀시험시 시료의 두께에 대한 직정의 비율이 크면 일반적으로 측면마찰은 없다고 간주된다. 그러나, 시료의 두께가 커질수록 측면 마찰의 영향은 무시할 수 없게 된다. 본 연구에서는 정규압밀된 카올리나이트 슬러리의 압밀시험시 측면마찰의 영향을 조사하였다. 압밀시험을 통해 압밀시험곡선, 과잉간극수압, 압밀-간극비, 투수계수-간극비 관계를 측정하였고, 압밀-간극비 관계에 있어 측면마찰의 영향을 고려하기 위해 Taylor(1942)가 제안한 식을 적용하였다. 측정된 압밀시험곡선과 과잉간극수압에 대해 수치해석 결과와 비교 분석을 통해 측면 마찰이 압밀시험에 미치는 영향을 검토하였다. 그 결과, 측면 마찰의 영향을 고려한 수치해석 결과는 측면 마찰을 무시한 결과보다 측정값에 근사한 것으로 나타났으며, 측면 마찰은 압밀-간극비 관계 뿐만 아니라 압밀시간에도 영향을 주는 요인이라는 결과를 얻을 수 있었다.

• 대한토목학회논문집
• /
• 제28권1C호
• /
• pp.9-17
• /
• 2008

본 연구에서는 압밀 중에 위치별 간극수압의 측정을 통하여 시료 내 여러 위치에서 투수계수를 산정할 수 있는 이론해를 제시하였으며, 이를 바탕으로 간극비 및 체적압축계수를 산정할 수 있는 방법을 제안하였다. 또한 여러 위치에서 간극수압을 측정할 수 있는 방사내측배수가 가능한 대형압밀시험기를 제작하고 카올리나이트를 이용하여 압밀시험을 실시하였다. 시험결과로부터 압밀 중 투수계수, 간극비, 체적압축계수의 변화 및 시료 내 위치별 분포를 평가하였으며, 압밀완료 후 시료의 함수비 측정으로 평가된 값들과의 비교를 통하여 실험결과의 신뢰성을 검증하였다. 실험결과 투수계수, 체적압축계수, 간극비는 압밀 중 감소하며, 재하단계에 따라서도 감소함을 확인하였다. 또한 그 분포형태는 배수면 근처에서 가장 작고 배수거리에 따라 증가하며 비배수 경계면 근처에서는 오히려 약간 작은 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제27권9호
• /
• pp.47-53
• /
• 2011

항로유지 준설과 해안건설 현장에서 채취된 해양준설토는 일반적으로 점토 성분 내에 다량의 염분을 함유하고 있다. 본 논문은 염분이 포함된 고화준설토(S-SDS)와 염분이 포함되지 않은 고화준설토(N-SDS)의 역학적 특성에 대한 염분의 영향을 분석하였다. 이를 위해 염분이 포함된 준설토와 염분이 포함되지 않은 준설토에 각각 동일한 양의 시멘트를 혼합하여 여러 개의 시편을 제작하였다. 7일 혹은 28일 양생된 N-SDS와 S-SDS 시편에 대하여 전자현미경 분석, 일축압축시험 및 구속압축시험을 수행함으로써 고화준설토의 미세 흙구조, 강도 및 압축 특성을 비교 및 분석하였다. 실험결과 점토에 포함된 염분은 고화준설토의 미세 흙구조 형성 뿐만 아니라 고화토의 강도발현에 영향을 주는 것으로 나타났다. 또한 S-SDS의 압축지수와 팽창지수는 N-SDS 보다 크게 나왔다. 이것으로부터 염분은 고화토의 압축성을 증가시킨다는 것을 알 수 있다. 염분은 고결화된 준설토의 강도발현 및 압축성에 악영향을 주었다.

• 한국의류학회지
• /
• 제13권3호
• /
• pp.187-196
• /
• 1989

The purpose of this study is to find at the basic data for the appropriate compressibility of the pillows for the Koreans as well as, for the appropriate conditions to establish the estimating criterion for the pillows on the market place. This paper also aim to grasp thr compressibility of the materials used to make the pillows for sale. The appropriate compressive rate of the pillows have been investigated by sensuous test. The compressive rate, recovery rate, and decreasing rate of compression and recovery have been investigated by means of ergonomic and physical experiments. The results were as follows; 1) By sensuous test, the compressive rate of the pillows for the most comfortable state turns up $45\%{\pm}5\%$ in men and women. 2) As for the compressive rate and recovery rate of the eight pillow materials on market, panya, duck feather two kinds of synthetic fiber are highest, wood is lowest. 3) The compressive rate of panya, duck feather, and two kinds of fiber is within the range of the comfort by sensuous test. 4) In the durability of the compressive rate and recovery rate against the repeated use of the pillows, duck feather is in the highest grade, panya is the lowest grade and the others are graded between two.

• Geomechanics and Engineering
• /
• 제25권4호
• /
• pp.341-345
• /
• 2021

1D sand compression response to ko-loading experiences volume contraction from low to high effective stress regimes. Previous study suggested compressibility model with physically correct asymptotic void ratios at low and high stress levels and examined only for both remolded clays and natural clays. This study extends the validity of Enhanced Terzaghi model for different sand types complied from 1D compression data. The model involved with four parameters can adequately fit 1D sand compression data for a wide stress range. The low stress obtained from fitting parameters helps to identify the initial fabric conditions. In addition, strong correlation between compressibility and the void ratio at low stress facilitates determination of self-consistent fitting parameters. The computed tangent constrained modulus can capture monotonic stiffening effect induced by an increase in effective stress. The magnitude of tangent stiffness during large strain test should not be associated with small strain stiffness values. The use of a single continuous function to capture 1D stress-strain sand response to ko-loading can improve numerical efficiency and systematically quantify the yield stress instead of ad hoc methods.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.320-325
• /
• 2009

The constrained modulus, representative property to evaluate compressibility of soil, is needed to estimate the settlement of ground structure. A series of lab and field cone penetration tests for clayey soil of Busan new-port and Noksan industrial area were conducted to evaluate the estimation method of constrained modulus. Since CPT generates large deformation of ground, it is difficult to correlate the cone resistance with the constrained modulus. Therefore, appropriate correlation between them is essential to estimate the constrained modulus based on CPT results. The test results show that the ratio of the constrained modulus to the cone resistance is inversely proportional with plasticity index. Based on this result, the estimation method of constrained modulus for Busan clay is suggested.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.119-139
• /
• 2017

Static Penetration Test (CPT) and Dynamic Penetration Test (DPT) are commonly used in-situ tests in a routine geotechnical investigation. Besides their use for qualitative investigation (lithology, homogeneity and spatial variability), they are used as practical tools of geotechnical characterization (resistance to the penetration, soil rigidity) and modern foundation design as well. The paper aims at presenting the results of an extensive research work on the evaluation of the 1D primary consolidation settlement of saturated clayey soils on the basis of the CPT or DPT tests. The work is based on an analysis of the correlations between the tip resistance to penetration measured in these tests and the parameters of compressibility measured by the compressibility oedometer test, through a local geotechnical database in the northern Algeria. Such an analysis led to the proposal of two methods of calculation of the settlement, one based on the CPT test and the other one on the DPT. The comparison between the predicted settlements and those computed on the basis of the oedometer test showed a good agreement which demonstrate the possbility to use the CPT and DPT tests as reliable tools of computation of foundation settlements in clayey soils.