• Journal of the Korean Institute of Gas
• /
• v.13 no.6
• /
• pp.29-33
• /
• 2009

In this study, the strength safety of a composite fuel tank which is fabricated by an aluminum liner of Al6061-T6 materials and composite layers of carbon/epoxy-glass/epoxy composites has been analyzed by using a finite element analysis technique. In order to enhance the durability of the composite fuel tank, an autofrettage process was used and compressed natural gas was supplied to the prestressed fuel tank. The FEM computed results on the stress safety of autofrettaged gas tanks were compared with a criterion of design safety of US DOT-CFFC and Korean Standard. The FEM computed results indicated that the stress safety of autofrettaged fuels tanks shows instability at the dome zone and uniform stability at the parallel body, which provide an evaluation data for a strength safety of autofrettaged composite fuel tanks. The computed results show that the stress safety of 9.2 liter composite fuel tanks satisfied the safety criteria of four evaluation items, which are provided by US DOT-CFFC and KS and indicated a safe design.

• Journal of Power System Engineering
• /
• v.12 no.5
• /
• pp.27-33
• /
• 2008

Natural gas has been considered one of the most promising alternative fuels for transportation because of its abundance as well as its ability to reduce regulated pollutants. We measured emission characteristics of nanoparticles from lean burn H/D(Heavy-Duty) CNG (Compressed Natural Gas) engine equipped with oxidation catalysts. The experiments were carried out to measure the emission and engine performance according to the ESC test cycle. The CO and THC conversion efficiencies on the best catalyst in the ESC test cycle achieved about 91 % and 83 %, respectively. From the measurement by the SMPS, the number of nanoparticles emitted from H/D CNG engine is reduced by about 99 % which is more than that of 2.5 L diesel engine. The particle number concentrations of H/D CNG engine were almost nanoparticles. Nanoparticles smaller than 30 nm emitted from the H/D CNG engine and diesel engine equipped with a CDPF(Catalyzed Diesel Particulate Filter) were quite similar. However, the particles bigger than 30nm from the CNG engine were smaller than the particles from diesel engine equipped with a CDPF. The higher the CNG engine load, the lower the particle number from engine-out, but it increased slightly at full load.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.226.2-226.2
• /
• 2010

수소경제로 가는 길목에서의 압축천연가스에 수소를 첨가한 수소-압축천연가스(HCNG)는 자동차 연료로서의 뛰어난 효과로 인해 미국, 캐나다, 유럽 등에서는 강화되고 있는 자동차의 배출가스 규제에 대해 만족할 수 있는 차세대 천연가스 자동차의 대안으로서 관련 기술개발과 실증사업에 주력하고 있다. 향후 수소시대의 도래에 즈음하여 HCNG의 사용은 수소사용에 대한 인식 향상과 아울러 수소사용을 안정적으로 공급할 수 있는 토대를 마련하고 수소제조 등 여러 분야에서 기술개발을 할 수 있는 부가적인 효과가 있다고 하겠다. 따라서 최근 국내에서 시내버스와 청소차등에서 천연가스 차량의 보급이 확대되고 있고, 충전소도 점차 확대되고 있는 상황에서 HCNG 연료의 적용가능성을 확인하기 위한 연구가 진행되고 있다. 본 논문에서는 선진국과 국내의 기술개발 현황을 소개하고 향후 우리에게 필요한 과제가 무엇인지를 생각해보는 기회를 갖고자 하였다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.203-206
• /
• 2005

The objective of study on composite cylinder for alternative fuel vehicle is to develop safe, efficient, and commercially viable, on-board fuel storage system for the fuel cell vehicle or natural gas vehicle that use highly compressed gaseous fuel such as hydrogen or natural gas. This study presents the whole procedure of development and certification of a type 3 composite cylinder of 207bar service pressure and 70 liter water capacity, which includes design/analysis, processing of filament winding, and validation through various testing and evaluation. Design methods of liner configuration and winding patterns are presented. Three dimensional, nonlinear finite element analysis techniques are used to predict burst pressure and failure mode. Design and analysis techniques are verified through burst and cycling tests. The full qualification test methods and results for validation and certification are presented.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.53-59
• /
• 2000

Recently air pollution is increased according to increase of vehicle. So many countries are studying about compressed natural gas engine. Research on the development of CNG dedicated engine that has important meaning both as a clean fuel and an alterna-tive energy to reduce the exhaust emission from diesel engine are actively going on these days. In this study the character-istics of CNG engine was investigated and the engine performance experimented by changing the parameters such as boost pressure. The CNG engine performance and exhaust emission were measured by engine performance mode at maximum load condition with increasing the rpm in the range of 1,000-2,200rpm. The exhaust emission was also measured at D-13 mode and compared to the emission regulation.

• New & Renewable Energy
• /
• v.6 no.3
• /
• pp.30-38
• /
• 2010

수소경제로 가는 길목에서의 압축천연가스에 수소를 첨가한 수소-압축천연가스(HCNG)는 자동차 연료로서의 뛰어난 효과로 인해 미국, 캐나다, 유럽 등에서는 강화되고 있는 자동차의 배출가스 규제에 대해 만족할 수 있는 차세대 천연가스 자동차의 대안으로서 관련 기술개발과 실증사업에 주력하고 있다. 향후 수소시대의 도래에 즈음하여 HCNG의 사용은 수소사용에 대한 인식 향상과 아울러 수소사용을 안정적으로 공급할 수 있는 토대를 마련하고 수소제조 등 여러 분야에서 기술개발을 할 수 있는 부가적인 효과가 있다고 하겠다. 따라서 최근 국내에서 시내버스와 청소차등에서 천연가스 차량의 보급이 확대되고, 충전소도 점차 확대되고 있는 상황에서 HCNG 연료의 적용가능성을 확인하기 위한 연구가 진행되고 있다. 본 논문에서는 인프라 관점에서의 선진국과 국내의 기술개발 현황을 소개하고 향후 우리에게 필요한 과제가 무엇인지를 생각해보는 기회를 갖고자 하였다.

• Journal of Hydrogen and New Energy
• /
• v.22 no.5
• /
• pp.735-740
• /
• 2011

본 연구에서는 직접분사식 CNG기관의 희박한계를 보다 확장하여 고효율 및 저배기 공해를 실현시키고자 실린더 내에 고압의 천연가스를 직접분사함과 동시에 흡입과정 중 흡기관 내에 소량의 저압천연가스를 보조분사하는 경우의 희박한계 확장 및 제반특성에 대해 검토하였다. 그 결과, 흡기보조분사가 없을 경우 희박한계가 ${\lambda}$ = 1.4 까지였으나, 흡기보조분사율이 5~15% 정도에서는 희박한계가 ${\lambda}$ = 1.5 까지 확장되었다. 이는 흡기보조분사에 따른 혼합기의 혼합율 향상에 기인한 것으로 해석하였다. 연소기간은 줄어들었지만, 흡기보조분사의 효과는 주연소기간에서 조기연소기간보다 강하게 나타났다.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.2 s.140
• /
• pp.142-150
• /
• 2005

Recently, the gas transportation system for CNG(Compressed Natural Gas) has been developed and several innovative approaches are presented from the aspects of commercial demand. In this study, a new type of 20ft container shape CNG tank with two and four cylinder intersections by using the intersecting spheres has been proposed. And the structural analysis of CNG tank with Mildsteel, API High Tensile Steel, Al-alloy and FRP has been carried out to compare the different types of pressure vessels of materials used. The analysis result shows that the proposed intersectional cylindrical type of CNG tank can be applied to the gas transportation system. And further study on the commercial analysis and associated equipments should be carried out for the practical applications.

• 한국가스학회:학술대회논문집
• /
• 2000.09a
• /
• pp.244-247
• /
• 2000

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.16-21
• /
• 2003

Natural gas is one of the promising alternative fuels because of the abundant deposits and the cleanness of emission gas. It can be used in conventional gasoline engine without major modification. Natural gas has some advantages than gasoline i.e. the high octane number, good mixing condition because of gas and wide inflamable limit. In the present study, a $1.8{\ell}$ conventional gasoline engine is modified for using the CNG as a fuel instead of gasoline. Performance and emission characteristics are compared between gasoline and CNG with 4 cylinder SI Engine which is controlled by programable ECU. Parameters of experimentation are equivalence ratio, spark timing and fuels. We analyzed the combustion characteristics of the engine using the cylinder pressure i.e. ignition delay, combustion duration and cycle variation. As a result, CNG engine shows lower exhaust emissions but brake torque is slightly reduced compared to gasoline engine. Overall combustion duration is longer than that of gasoline because of lower burning speed.