• Wind and Structures
• /
• v.5 no.6
• /
• pp.479-492
• /
• 2002

A finite element aerodynamic model that can be used to analyse flutter instability of long span bridges in the time domain is presented. This approach adopts a simplified quasi-steady formulation of the wind forces neglecting the vortex shedding effects. The governing equations used are effective only for reduced velocities $V^*$ sufficiently great: this is generally acceptable for long-span suspension bridges and, then, the dependence of the wind forces expressions of the flutter derivatives can be neglected. The procedure describes the mechanical response in an accurate way, taking into account the non-linear geometry effects (large displacements and large strains) and considering also the compressed locked coil strands instability. The time-dependence of the inertia force due to fluid structure interaction is not considered. The numerical examples are performed on the three-dimensional finite element model of the Great Belt East Bridge (DK). A mode frequency analysis is carried out to validate the model and the results show good agreement with the experimental measurements of the full bridge aeroelastic model in the wind tunnel tests. Significant parameters affecting bridge response are introduced and accurately investigated.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.192-194
• /
• 2005

Acceptance of the international standards for video compression, such as H.261, MPEG-1 and MPEG-2, along with the developments in video codec hardware, has created an explosion of application. Among these, the long time quest for long-distance digital video transmission causes an increasing interest in transporting compressed video over networks which are nontraditional for this purpose, including asynchronous transfer mode networks, the Internet, and cellular and wireless channels. Transmission of compression video over packet network is improved for error resilience. And layered video coding techniques improves error resilience. We present a efficient method of scalable video coding for low bandwidth.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.5
• /
• pp.46-53
• /
• 2002

A novel ultra-narrow linewidth single longtudinal mode DFB semiconductor laser in the extended FBG cavity is proposed. The 3㏈ linewidth of 20KHz was demonstrated by using self-heterodyne measurement set-up with a fiber delay line of 63km. And this linewidth was further compressed to less than 3KHz, which is resolution limited performance, by inserting E $r^{+3}$ doped fiber saturable absorber. This is equivalent to 3㏈ linewidth of 2$\times$10$^{-8}$ nm.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.105-109
• /
• 2002

The main ideas of hybrid video coding methods are to reduce the spatial and temporal redundancy for efficient data compression. If compressed video stream is transmitted through the error-prone channel, bitstream can be critically damaged and the spatio-temporal error propagates through successive frames at the decoder because of drift noise in the references between encoder and decoder. In this paper, I propose the lagrangian multiplier selection method in the error-prone environment. Finally, it is shown that the performance comparisons of the R-D optimized mode decision are made against the conventional method and simulation results are given in the following.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.10a
• /
• pp.187-193
• /
• 1999

As the slenderness ratio increases, it is necessary to examine the increased sectional area of member by means of increasing buckling strength because the sectional area of compressive member is designed in accordance with buckling. In this reason tn reinforce insufficient strength it don not have to reinforce the whole sectional area of member. Force of member can be increased in a way to restrict buckling mode by means of the partially increased sectional area of member. Therefore, in this study, we put emphasis on compressive members among many members that constitute space frame and try to get basic data about the reinforcement of space frame by means of investigating the bucking characteristic according to the size and length of partially increased sectional area of member.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.353-358
• /
• 2010

High pressure gas is a widely used storage mode for hydrogen fuel. A typical hydrogen tank that is charged with hydrogen gas can function as a hydrogen supply source in a large number of applications. The filling process of a high-pressure hydrogen tank should be reasonably short. However, when the fill time is short, the maximum temperature in the tank increases. Therefore the process should be designed in such a way to avoid high temperatures in the tank because of safety reasons. The paper simulates the fast filling process of hydrogen tanks using Computational Fluid Dynamics method. The local temperature distribution in the tank is obtained. Results obtained are compared with available experimental data. Further work is going on to improve the accuracy of the calculations.

• Steel and Composite Structures
• /
• v.6 no.3
• /
• pp.221-236
• /
• 2006

The objective of this work is to describe the main steps involved in the derivation of a GBT (Generalised Beam Theory) formulation to analyse the vibration behaviour of loaded cold-formed steel members and also to illustrate the application and capabilities of this formulation. In particular, the paper presents and discusses the results of a detailed investigation about the local and global free vibration behaviour of lipped channel simply supported columns. After reporting some relevant earlier GBT-based results dealing with the buckling and vibration behaviours of columns and load-free members, the paper addresses mostly issues concerning the variation of the column fundamental frequency and vibration mode nature/shape with its length and axial compression level. For validation purposes, some GBT-based results are also compared with values obtained by means of 4-node shell finite element analyses performed in the code ABAQUS.

• Annual Conference of KIPS
• /
• 2012.04a
• /
• pp.567-569
• /
• 2012

TCP의 성능저하는 버티컬 핸드오버에서만 발생하는 것이 아니라 호라이즌탈 핸드오버에서도 발생할 수 있다. 핸드오버 시 패킷 포워딩을 할 경우, 패킷은 라우터를 통해 소스 셀로 전송이 되었다가 단말이 이동한 타겟 셀로 다시 라우터를 통해 전송이 이루어지기 때문에 TCP 연결의 RTT가 증가하거나 패킷 리오더링에 의한 3dup ACK가 발생하는 문제가 있다. 또한 핸드오버 직후 포워딩된 데이터와 새 데이터가 합쳐져 일시적으로 데이터양이 급증하는 문제가 있다. 이 문제를 해결하기 위하여 Freeze TCP와 연동하여 패킷 리오더링과 타임아웃으로 인한 패킷 손실 문제를 해결한다. 핸드오버 직후 압축모드 기법을 사용하여 일시적인 데이터 폭주문제를 해결한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.160-162
• /
• 2018

본 논문에서는 압축 영역에서 열 영상을 이용한 딥러닝 기반의 객체 검출 방법을 제안한다. 비디오 압축 표준인 High Efficiency Video Coding(HEVC)를 이용하여 부보화된 비트스트림으로부터 Intra Prediction Mode(IPM), Prediction Unit Size(PUS), Transform Unit Size(TUS)를 추출하고 3 채널 영상으로 변환하고 객체 검출 네트워크인 YOLO 에 입력으로 넣어주어 최종적으로 객체의 위치 및 객체의 종류를 예측한다. 실험결과로써 복원된 열 영상과 검출된 결과를 주관적으로 보여줌으로써 압축영역에서 열영상을 이용한 객체 검출이 가능함을 보인다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.3
• /
• pp.44-53
• /
• 2010

The H.264/AVC has been designed to use 9 directional intra prediction modes for removing spatial redundancy. It also employs high correlation between neighbouring block modes in sending mode information. For indication of the mode, smaller bits are assigned for higher probable modes and are compressed by predicting the mode with minimum value between two prediction modes of neighboring two blocks. In this paper, we calculated the statistical probability of prediction modes of the current block to exploit the correlation among the modes of neighboring two blocks with several test video sequences. Then, we made the probable prediction table that lists 5 most probable candidate modes for all possible combinatorial modes of upper and left blocks. By using this probability table, one of 5 higher probable candidate modes is selected based on RD-optimization to reduce computational complexity and determines the most probable mode for each cases for improving compression performance. The compression performance of the proposed algorithm is around 1.1%~1.50%, compared with JM14.2 and we achieved 18.46%~36.03% improvement in decoding speed.