• Nuclear Engineering and Technology
• /
• 제34권4호
• /
• pp.370-381
• /
• 2002

The neutron induced nuclear data for Pr-141, Nd-143, Nd-145, Sm-147 and Sm-149 were calculated and evaluated from 10 keV to 20 MeV. The energy dependent optical model potential parameters were extracted based on the recent experimental data and applied up to 20 MeV. The s-wave strength function was calculated. Spherical optical model , statistical model in equilibrium energy, multistep direct and multistep compound model in pre-equilibrium energy and direct capture model were introduced in Empire calculation. The theoretically calculated cross sections were compared with the experimental data and the evaluated files. The model calculated total and capture cross sections were in good agreement with the reference experimental data. The capture cross sections in pre-equilibrium were enhanced in recent released Empire version. The evaluated cross section results were compiled to ENDF-6 format and will improve the ENDF/B-Vl.

• 한국광학회지
• /
• 제16권1호
• /
• pp.85-98
• /
• 2005

두 개의 DFB 영역과 위상 조정 영역으로 구성된 다중 전극 index-coupled DFB 레이저에서 self-pulsation 동작 특성을 수치 해석으로 분석하였다. 금지 대역폭 내에 존재하는 전체 공진기 모드 수가 감소할수록 두 DFB 영역의 브래그 파장 차이인 $\Delta$λ$_{B}$가 변화할 때 발진 모드의 호핑이 발생하는 경우의 수가 적어져 pulsation 주파수가 불연속적으로 변화하는 경우의 수가 감소한다. 또한 고정된 $\Delta$λ$_{B}$에 대하여 위상 조정 영역의 위상이 변화할 때 pulsation 주파수가 연속적으로 변화한다. 결합 세기와 위상 조정 영역의 길이가 고정되어 있을 때 금지 대역폭 내에 존재하는 전체 공진기 모드의 수는 DFB 영역의 길이가 길수록 감소한다. 반면에 DFB 영역의 결합 세기와 길이가 고정되어 있을 때 금지 대역폭 내에 존재하는 전체 공진기 모드의 수는 위상 조정 영역의 길이가 작을수록 감소한다. 따라서 결합 세기 및 각 영역의 길이를 적절히 조정하면 $\Delta$λ$_{B}$ 또는 위상조정 영역의 위상이 변화하여도 모드 호핑이 발생하지 않아 안정된 pulsation 동작을 얻을 수 있음을 보였다.을 보였다.

• 설비공학논문집
• /
• 제19권4호
• /
• pp.285-290
• /
• 2007

This study has been numerically conducted to investigate the removal efficiency of Volatile Organic Compound (VOC) in photocatalytic micro-reactor. This study has placed emphasis on the improvements of the working condition of photocatalytic micro-reactor. The micro-reactor consists of 19 microchannels with a rectangular cross-section. For the validation of the current numerical study, a computation has been carried out to simulate an existing experimental study on the cylindrical reactor, which has shown a good agreement. The degradation characteristics with different inlet concentrations and velocities have been obtained. The current results can be used for the design of advanced photocatalytic micro-reactor.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1889-1900
• /
• 1995

In this study, a large deflection analysis of a plane frame composed of a thin-walled tube in investigated. When bent, a thin-walled tube is usually controlled by local buckling and subsequent bending collapse of the section. So load resistance reaches the yield level in a thin-walled rectangular tube. This relationship can be divided into three regimes : elastic, post-buckling and crippling. In this paper, this relationship is theoretically presented to be capable of describing nonlinearities and a stiffness matrix is derived by introducing a compound beam-spring element. A numerical analysis uses a constant incremental energy method and the solution is obtained by modifying stiffness matrix at elastic/inelastic stage. This analytical results, load-deflection paths show a good agreement with the test results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.103-110
• /
• 2000

A two phase compound jet, which mixes pulverized solid particles with the air in the test section, is experimentally analyzed in this study. Two phase flow is jetted 10 degree upward in the primary jet, while the secondary jet utilizes the air only. The height difference between the primary and secondary central axises is 32.5mm. The velocity vector field, concentration field, and turbulent properties of solid particles are measured by using 3-Dimensional Particles Dynamics Analyzer. When the jet angle of the secondary jet goes into effect, the solid particle recirculation zone becomes larger. Also, solid particle concentration becomes more dense due to a velocity decrement of particles.

• Korean Journal of Hydrosciences
• /
• 제8권
• /
• pp.41-56
• /
• 1997

A new routing computer model for the symmetric compound channel called the ASRMCS(Apparent Shear Force Muskingum-Cunge Method in Symmetry) has been developed. The Muskingum-Cunge routing method is adapted. The Apparent Shear Force (ASF) between the deep main channel and the shallow floodplan flow is introduced while the flow is routed. The nonlinear parameter method is applied. The temporal and spatial increments are varied according to the flow rate. The adaptation of above schemes is tested against the routed hydrographs using the DAMBRK model. The results of general routing practice of Muskingum-Cunge Method(GPMC) are also compared with those of above two models. The results of the new model match remarkably well with those of DAMBRK. The routed hydrographs show a smooth variation from the inflow boundary condition without any distortions caused by the difference of cross-section shape. However, the results of GPMC, showing early rise and fall of routed hydrograph, have considerable differences from those of the ASFMCS and DAMBRK.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.534-538
• /
• 2002

Dissimilar friction stir welding of aluminum (AI) alloy 1050 and magnesium (Mg) alloy AZ31 was successfully done in the limited welding parameters. The dissimilar weld showed good quality and facility compared to conventional fusion weld. Transverse cross section perpendicular to the welding direction had no defects. The weld was divided into base material of Al alloy, an irregular shaped stir zone and base material of Mg alloy. The irregular shaped stir zone was roughly located around the initial weld center. The weld interface near plate surface shifted from initial weld centerline to the advancing side. Hardness profile of the weld was heterogeneous, and the hardness value of the stir zone was raised to about 150 Hv to 250 Hv. The mixed phase was identified to intermetallic compound $Mg_{17}$Al$_{12}$ using x-ray diffraction method, energy dispersive x-ray spectroscopy (EDX) and electron probe micro analysis (EPMA). The formation of intermetallic compound $Mg_{17}$Al$_{12}$ during FSW causes the remarkable increase in hardness value in the stir zone.one.

• 한국의류산업학회지
• /
• 제2권3호
• /
• pp.227-233
• /
• 2000

The purpose of this study was to develop the High Functional Covering machine and the Compound Twister to produce the high value added textile goods and to meet the consumer's needs. For the study, 8 yarns and 12 fabrics were made with two developed machines and the tensile characteristics of the samples were tested and analysed. The result indicated that the sample fabrics kept their elongation regardless of buffering process. Elongation of the sample yarns was higher than those of yarns made with a traditional covering method. Elastic recovery of the sample fabrics was more effected by the recovery rate than by the number of extension and the characteristics of the sample yarns and fabrics were comparable to the yarns and fabrics made with a traditional covering method in terms of the position of Spandex yarns in their yarn structure and buffering effect.

• Applied Biological Chemistry
• /
• 제39권5호
• /
• pp.379-383
• /
• 1996

조생종 쌀인 오대벼 품종을 대상으로 종자의 배유세포에 있는 전분복합체와 단백질체의 외부형태 및 미세 구조의 특징을 광학현미경과 전자현미경으로 관찰하였다. 배유세포는 긴 막대모양으로 세로 단면이 장방형 또는 마름모형을 하고 있고, 세포벽은 $0.5\;{\mu}m$의 두께로 균질한 막상 구조물로 이루어져 있다. 또한, 세포내에는 구형 또는 타원형의 전분복합체가 치밀하게 채워져 있으며, 직경이 $18{\sim}25\;{\mu}m$로 다양한 크기로 존재하였다. 전분복합체는 12면체 또는 14면체의 중앙 전분과립을 중심으로 약 $5\;{\mu}m$ 크기의 전분과립들이 동심원상으로 2 내지 3층으로 형성되어 있다. 배유세포에서 단백질체는 호분층에서 보다 아주 드물게 관찰되었지만, 전분복합체의 주변에 인립하여 산재하고 있다. 단백질체는 직경이 약 $3\;{\mu}m$로 구형 또는 난원형의 형태를 하고 있으며 미세구조적으로 중심부는 전자밀도가 높게, 한계막의 주변부는 비교적 전자밀도가 낮게 관찰되었다.

• 한국유체기계학회 논문집
• /
• 제14권1호
• /
• pp.55-60
• /
• 2011

Numerical analyses of a turbine redesigned to achieving the weight reduction by equipping square nozzles and the original turbine have been conducted and the results have been compared. The results show that the turbine with square section nozzles has more even flow distribution at the first row rotor inlet and less inactive areas but the loss induced by wake is increased. Despite the wake loss, the newly designed turbine shows better performance than the original one. It has also been found that the turbine performance can be improved by reshaping its stator and second row rotor.