• 한국어교육
• /
• 제28권3호
• /
• pp.153-180
• /
• 2017

This research examined compound particles, which have not been properly addressed in existing studies on particle combination education, from the perspective of Korean language education as a second language. First, existing research was examined with the understanding of the issue that there is a lack of discussion in existing studies on the education method of either including the compound particle in particle combination or excluding it all together. In the next chapter, an examination was made on the concept and usage of terminology for compound particles in the field of Korean linguistics. Following a summary of this information, a review was made on the list of compound particles established in Korean linguistics. Thus, seven compound particles were identified for Korean language education considering discriminant standard and educational effectiveness from the perspective of Korean language education. The researcher proposes that the compound particle should be taught as an extension of particle combination education and that its concept should be clearly outlined as a direction for future education.

• 한국의류산업학회지
• /
• 제6권5호
• /
• pp.667-672
• /
• 2004

Poly(ethylene terephthalate) (PET) fabrics were treated with a silica particle and phosphate flame retardant to determine the optimum process condition of the digital textile printing(DTP) media. The treating conditions for the study were 6 conditions, from F1 to F6, in which F3, F4 and F5 were treated with mixture of both silica particle and phosphate compound in process of pad, dry and cure fixation. F6 was treated with phosphate compound only and silica particle coating successively. Xanthan gum was used to control the migration of liquid phosphate compound onto PET fabrics. The change in surface morphology of fabrics treated with silica particle and phosphate compound was observed by SEM and flame retardance was evaluated by limiting oxygen index(LOI). It was observed that F6 was the excellent flame retardance and low bleeding in printing, Collectively, the printing characteristics of silica to cyan, magenta, yellow and black ink and flame retardance of fabrics finished with phosphate compound were identified in this study.

• 청정기술
• /
• 제19권3호
• /
• pp.249-256
• /
• 2013

본 연구에서는 프린터 토너의 대전량 제어제로 사용되는 아연 착화합물 제조시 금속염과 다가알코올을 첨가함에 따라 변화되는 입자 형태, 평균 입도 및 마찰대전량에 대해 고찰하였다. 아연 착화합물을 제조하기 위해 염화아연과 3,5-di-tert-butyl salicylic acid를 사용하였다. 다가알코올을 첨가함에 따른 입자 형태 변화를 확인하기 위해 아연 착화합물 제조시 폴리에틸렌 글리콜(PEG-300), 글리세린 및 에틸렌글리콜을 첨가하였고, 금속염인 염화알루미늄을 첨가함으로써 변화되는 입자크기를 확인하였다. 또한 금속염과 다가알코올을 동시에 첨가하여 입도 변화를 확인한 결과, 각각 단독으로 첨가 했을 때보다 아연착화합물의 평균 입도가 더 많이 감소하는 것을 확인할 수 있었다. 특히, 알루미늄 착화합물의 함유량이 30 wt%이고 염화아연에 대한 PEG-300의 몰비를 3으로 하였을 때 아연 착화합물의 평균 입도가 $2.33{\mu}m$로 순수한 아연 착화합물의 평균 입도인 $5.28{\mu}m$의 44.1%로 가장 많이 감소한 것을 알 수 있었다.

• 공업화학
• /
• 제23권1호
• /
• pp.8-13
• /
• 2012

본 연구에서는 프린터 토너의 대전량 제어제로 사용되는 아연 착화합물 제조시 금속염과 다가알코올을 첨가함에 따라 변화되는 입자 형태와 평균 입도에 대해 고찰하였다. 아연 착화합물을 제조하기 위해 염화아연과 3,5-di-tert-butyl salicylic acid를 사용하였다. 다가알코올을 첨가함에 따른 입자형태 변화를 확인하기 위해 아연 착화합물 제조시 polyethylene glycol (PEG-300), glycerin 및 ethylene glycol을 첨가하였고, 금속염인 지르코늄 옥시클로라이드를 첨가함으로써 변화되는 입자크기를 확인하였다. 또한 금속염과 다가알코올을 동시에 첨가하여 입도변화를 확인한 결과, 각각 단독으로 첨가했을 때보다 아연 착화합물의 평균 입도가 더 많이 감소하는 것을 확인할 수 있었다. 특히, 지르코늄 착화합물의 함유량이 30 wt%이고 염화아연에 대한 PEG-300의 몰비를 3으로 하였을 때 아연 착화합물의 평균 입도가 1.84 ${\mu}m$로 순수한 아연 착화합물의 평균 입도(5.28 ${\mu}m$)의 34.9%로 가장 많이 감소한 것을 알 수 있었다.

• Elastomers and Composites
• /
• 제44권1호
• /
• pp.47-54
• /
• 2009

본 연구에서는 다양한 종류의 보강제를 혼합한 EPDM 컴파운드의 원적외선에 의한 가교 반응을 조사하였다. 보강제가 원적외선에 의한 가교 반응에 미치는 영향을 평가하기 위하여 컴파운드의 발열 온도 및 DSC 분석에 의한 가교도를 측정하였으며, 특히 원적외선에 의한 가교 특성을 비교하기 위하여 동일 조건에서 열풍에 의한 가교 반응을 조사하였다. 원적외선 가교 조건에서 카본블랙을 혼합한 EPDM 컴파운드는 입자크기가 증가함에 따라 열전도도가 증가하며 이에 따라 원적외선에 의한 가교도 역시 증가하였으나, 열풍에 의한 가교도의 변화에는 거의 영향을 주지 못하였다. 보강제 종류에 따른 원적외선 가교 특성 평가 결과, 열전도도가 높은 아세틸렌 블랙을 함유한 컴파운드의 가교도가 가장 높게 나타났으며, 열전도도가 유사한 카본블랙 및 침강실리카의 경우 상대적으로 원적외선 흡수 특성이 우수한 침강실리카 배합 컴파운드의 경우 원적외선에 의한 가교도가 높게 나타났다.

• 한국분말재료학회지
• /
• 제10권2호
• /
• pp.123-128
• /
• 2003

$TiO_2$ nanopowder was synthesized by chemical vapor condensation (CVC) process and its photocatalytic property depending on microstructure was considered in terns of decomposition rate of organic compound. In order to control microstructure of $TiO_2$ nanopowder such as particle size and degree of agglomeration, precursor flow rate representing number concentration was changed as a process variable. In TEM observation, spherical $TiO_2$ nanoparticles with average size of 20 nm showed gradual increases in particle size and degree of agglomeration with increase of precursor flow rate. Also decomposition rate of organic compound increased with decreasing precursor flow rate. Thus, it was concluded that photocatalytic property was enhanced by targe surface area of disperse $TiO_2$ nanoparticles synthesized at lower precursor flow rate condition in CVC process.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.103-110
• /
• 2000

A two phase compound jet, which mixes pulverized solid particles with the air in the test section, is experimentally analyzed in this study. Two phase flow is jetted 10 degree upward in the primary jet, while the secondary jet utilizes the air only. The height difference between the primary and secondary central axises is 32.5mm. The velocity vector field, concentration field, and turbulent properties of solid particles are measured by using 3-Dimensional Particles Dynamics Analyzer. When the jet angle of the secondary jet goes into effect, the solid particle recirculation zone becomes larger. Also, solid particle concentration becomes more dense due to a velocity decrement of particles.

• 대한환경공학회지
• /
• 제32권12호
• /
• pp.1147-1153
• /
• 2010

본 연구에서는 Compound parabolic concentrator reactor system을 이용하여 초기농도 10 mg/L의 클로로포름을 광촉매 반응으로 처리하였다. 1000 W의 메탈할라이드 방전램프를 인공태양광원으로 사용하였으며 약 99%의 클로로포름이 광촉매반응에 의하여 90분 안에 제거되어 먹는물 수질기준인 0.08 mg/L을 만족하였다(pH 5.24, $TiO_2$ 농도 0.2 g/L). 또한 초기 pH와 $TiO_2$ 농도가 클로로포름의 분해에 미치는 영향 을 알아보기 위해 pH 4, 5, 6, 7과 $TiO_2$ 농도 0.1, 0.2, 0.4의 조건에서 실험을 수행하였으며, 각 pH 에서의 $TiO_2$ 입자크기(particle size)와 비표면적(specific surface area)을 측정하여 클로로포름 분해율과 비교하여 비표면적과 광촉매반응 활성 사이의 상관관계를 규명하고자 하였다. 그 결과 pH와$TiO_2$ 농도에 따른 클로로포름 분해율은 큰 차이를 보이지 않았다. 하지만 pH에 따라 $TiO_2$의 입자크기분포(particle distribution)와 비표면적이 변했고 pH 7은 다른 pH 영역보다 비표면적이 약 2배 정도 작은 결과를 보였다. 본 연구의 결과를 바탕으로 클로로포름의 광촉매반응은 $TiO_2$의 비표면적과 상관관계가 없는 TCE-type인 것을 유추할 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.92-92
• /
• 2012

Chalcopyrite-type Cu(In,Ga)Se2 (CIGS) is one of the most attractive compound semiconductor materials for thin film solar cells. Among various approaches to prepare the CIGS thin film, the powder process offers an extremely simple and materials-efficient method. Here, we present the mechano-chemical synthesis of CIGS compound powders and their use as an ink material for screen-printing. During the synthesis process, milling time and speed were varied in the range of 10~600 min and 100~300 rpm, respectively. Both phase evolution and powder characteristics were carefully monitored by X-ray diffraction (XRD) method, scanning electron microscope (SEM) observation, and particle size analysis by scanning mobility particle spectrometer (SMPS) and aerodynamic particle sizer (APS). We found the optimal milling condition as 200 rpm for 120 min but also found that a monolithic phase of CIGS powders without severe particle aggregation was difficult to be obtained by the mechano-chemical milling alone. Therefore, the optimized milling condition was combined with an adequate heat-treatment (300oC for 60 min) to provide the monolithic CIGS powder of a single phase with affordable particle characteristics for the preparation of CIGS thin film. The powder was used to prepare an ink for screen printing with which dense CIGS thin films were fabricated under the controlled selenization. The morphology and electrical properties of the thin films were analyzed by SEM images and hall measurement, respectively.

• 한국표면공학회지
• /
• 제30권5호
• /
• pp.347-354
• /
• 1997

Composite plating is a method of co-depositing fine particles of metallic, non-metallic compound or polymers in the plated layer to improve material properties such as were-resistance, lubrication, or corrosion resistance. Graded Ni-Sic composite coating were produced in this research. Prior to produce Graded Ni-SiC composite coatings, effects of particle size, particle content, pH of electrolyte, temperature, current density, stirring rate on the amount of SiC deposited in the Ni layer were investigated. By manipulating current density and plating time properties of these coating were evaluated by micro-indentation hardness test.