• Bulletin of the Korean Chemical Society
• /
• 제27권11호
• /
• pp.1809-1814
• /
• 2006

The L-Valinate anion coordinating zinc complex, [$Zn(val)_2(H-2O)$], was isolated and structurally characterized by single crystal X-ray crystallography. The crystal possess orthorhombic symmetry with a space group $P2_12_12_1$, Z = 4, and a = 7.4279(2)$\AA$, b = 9.4342(2)$\AA$, c =20.5862(7)$\AA$ respectively. The compound features a penta-coordinate zinc ion in which the two valine anion molecules are directly coordinating the central zinc metal ion via their N (amine) and O (carboxylate) atoms, and an additional coordination to zinc is made by water molecule (solvent) to form a distorted square pyramidal structure. In addition, further synthesis of the valine capped ZnS:Mn nanocrystal from the reaction of [$Zn(val)_2(H-2O)$] precursor with $Na_2S$ and 1.95 weight % of $Mn^{2+}$ dopant is described. Obtained valine capped nanocrystal was water dispersible and was optically characterized by UV-vis and solution PL spectroscopy. The solution PL spectrum for the valine capped ZnS:Mn nanocrystal showed an excitation peak at 280 nm and a very narrow emission peak at 558 nm respectively. The measured and calculated PL efficiency of the nanocrystal in water was 15.8%. The obtained powders were characterized by XRD, HR-TEM, and EDXS analyses. The particle size of the nanocrystal was also measured via a TEM image. The measured average particle size was 3.3 nm.

• 한국추진공학회지
• /
• 제24권1호
• /
• pp.58-63
• /
• 2020

착화기에 많이 사용되고 있는 금속복합화약인 THPP(Titanium Hydride Potassium Perchlorate)는 금속연료로 타이타늄 수소화물(TiH₂), 산화제로 과염소산칼륨(KClO₄)을 주요 구성 성분으로 하는 파이로 테크닉 조성물이다. 그러나 산화제로 사용되는 과염소산칼륨은 갑상선 기능부전이나 종양 등을 일으킬 수 있는 유해물질로 염소 성분인 과염소산(ClO₄^-)이 포함되어 있다. 본 연구에서는 과염소산칼륨의 대체물질로서 과옥소산칼륨(KIO₄)을 적용하여 친환경 화약을 개발하였으며, 착화기에 적용하여 THPP 대체가능성을 확인하였다.

• Food Science and Biotechnology
• /
• 제18권3호
• /
• pp.672-681
• /
• 2009

The aim of this study was to evaluate the antioxidant activities of enzymatic digests from citrus by-products (CBPs) prepared by high speed drying (HSD). HSD needs a short time (60 min) for drying and can be used in a commercial scale. Enzymatic digests were prepared from the CBPs using 6 enzymes such as aminoglucosidase (AMG), celluclast, pectinex, termamyl, ultraflo, and viscozyme. Antioxidant activities of AMG digest from CBPs were evaluated by different in vitro models such as 1,1-diphenyl-2-picrylhydrazyl (DPPH), hydroxyl, alkyl, $H_2O_2$ scavenging, metal chelating, lipid peroxidation, and comet assays, and exhibited strong activities. The antioxidant compounds were detected by an high performance liquid chromatography (HPLC) coupled on-line to an 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid ($ABTS^+$) scavenging detection system, and found that hesperidin was the key compound. Therefore, the results obtained in this study suggest that HSD is an effective method to transform wet CBPs into dried form, and CBPs are potential source of natural antioxidant.

• 패션비즈니스
• /
• 제22권1호
• /
• pp.100-113
• /
• 2018

From the late 17th to the early 18th century, Europeans were strongly intrigued by products from the East. Therefore, several countries like England, France, and Netherlands formed the 'East India Company' to pursue trade. First, European markets rapidly responded to this desire for exoticism by importing goods; then, they produced imitation Oriental goods. Finally, they made stylistically advanced exotic merchandise from the perspectives of European. In terms of the textile industry, this trend was expressed in the pattern design of silk, or the so called 'bizarre silk.' In this paper, bizarre silk patterns were scrutinized based on a digital archive of museums, catalogues of museums, portal sites, and the literature. The bizarre silk patterns were analyzed then classified into six categories: pseudo-Oriental plant pattern, pattern mingled with architectural motifs, pattern of juxtaposed with Oriental goods, abstract pattern, exuberant pattern with metal threads, and semi-naturalistic pattern. These patterns were characterized according to the following features: strangely large exotic floral patterns were undulating and asymmetrical; exotic foliage and flowers were sometimes mixed with architectural motifs or Oriental goods to easily show the Oriental influence; motifs of bizarre silk patterns were abstractly stylized; bizarre silk patterns became luxurious once more like the Baroque period; finally, floral patterns became more natural, and still exotic motifs remained in the background to maintain the bizarre silk features. These bizarre silk patterns evolved from the viewpoints of Europeans through acceptance stage, compound stage, and confluent stage.

• 한국재료학회지
• /
• 제25권8호
• /
• pp.386-390
• /
• 2015

Fe-base superalloy powders with $Y_2O_3$ dispersion were prepared by high energy ball milling, followed by spark plasma sintering for consolidation. High-purity elemental powders with different Fe powder sizes of 24 and 50 mm were used for the preparation of $Fe-20Cr-4.5Al-0.5Ti-O.5Y_2O_3$ powder mixtures (wt%). The milling process of the powders was carried out in a horizontal rotary ball mill using a stainless steel vial and balls. The milling times of 1 to 5 h by constant operation (350 rpm, ball-to-powder ratio of 30:1 in weight) or cycle operation (1300 rpm for 4 min and 900 rpm for 1 min, 15:1) were applied. Microstructural observation revealed that the crystalline size of Fe decreased with an increase in milling time by cyclic operation and was about 15 nm after 3 h, forming a FeCr alloy phase. The cyclic operation had an advantage over constant milling in that a smaller-agglomerated structure was obtained. The milled powders were sintered at $1100^{\circ}C$ for 30 min in vacuum. With an increase in milling time, the sintered specimen showed a more homogeneous microstructure. In addition, a homogenous distribution of Y-compound particles in the grain boundary was confirmed by EDX analysis.

• 대한전기학회논문지
• /
• 제41권5호
• /
• pp.525-532
• /
• 1992

Fluorine-doped YBaS12TCuS13TOS17-xTFS1yT superconducting materials with y varing two orders of magnitude form 0.02 to 2.0 have been prepared by a sol-gel process by using metal nitrate salts, sodium hydroxide and sodium fluoride. Fluorine contents have been measured using an ion-selective electrode. All fluorine doped as reactant were found to be present in the resulted samples. From the observation of XRD it has been concluded that the samples with y 0.2 formed simply the single phase of perovskite structure, whereas those with y 0.5 yielded together some compounds such as BaFS12T, YFS13T and CuO in the resulted samples. The observation of solid state S019TF NMR has been carried out in order to check whether fluorine was actually incorporated into the lattice sites, and the experimental results revealed that the mole ratio of fluorine incorporated into the lattice sites of YBaS12TCuS13TOS17-xT was approximately 0.2 per mole of the compound. Also electrical resistivity measurement indicated that onset transition temperature has the tendency to increase slightly with increasing y in the dilute region as y 0.2.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.51-52
• /
• 2007

Built-in voltage in organic light-emitting diodes was studied using modulated photocurrent technique ambient conditions. From the bias voltage-dependent photocurrent, built-in voltage of the device is determined. The applied bias voltage when the magnitude of modulated photo current is zero corresponds to a built-in voltage. Built-in voltage in the device is generated due to a difference of work function of the anode and cathode. A device was made with a structure of anode/$Alq_3$/cathode to study a built-in voltage. ITO and ITO/PEDOT:PSS were used as an anode, and Al and LiF/AI were used as a cathode. It was found that an incorporation of PEDOT:PSS layer between the ITO and $Alq_3$ increases a built-in voltage by about 0.4V. This is consistent to a difference of a highest occupied energy states of ITO and PEDOT:PSS. This implies that a use of PEDOT:PSS layer in anode improves the efficiency of the device because of a lowering of anode barrier height. With a use bilayer cathode system LiF/Al, it was found that the built-in voltage increases as the LiF layer thickness increases in the thickness range of 0~1nm. For 1nm thick LiF layer, there is a lowering of electron barrier by about 0.2eV with respect to an Al-only device. It indicates that a very thin alkaline metal compound LiF lowers an electron barrier height.

• 한국식품저장유통학회지
• /
• 제18권6호
• /
• pp.817-823
• /
• 2011

Angelicae gigas Nakai has been used as a traditional medicine as well as an edible vegetable in South Korea. In this study, the total phenolic and flavonoid content and antioxidants of A. gigas Nakai leaves were examined in vitro via hydroxyl-radical-scavenging activity, reducing power activity, metal chelating assay, and DPPH-free -radical-scavenging assay. Among all the extracts from A. gigas Nakai leaves, the ethanol extract showed the strongest effects in all of the assays. The $EC_{50}$ values for the DPPH-radical-scavenging activities of ethanol, methanol, and water extracts were 31.47, 42.14, and $58.47{\mu}g/mL$, respectively. Among the extracts from A. gigas Kakai leaves, the ethanol extract had the highest levels of total phenolics ($7.84{\pm}1.46$ mg TAN/g) and total flavonoids ($4.23{\pm}0.03$ mg QE/g), which correlated strongly with the individual phenolic-compound (p-hydroxybenzoic acid, vanillin, and trans-ferulic acid) contents. The ethanol extract also showed stronger antioxidant activity than tocopherol in hydroxyl- radical-scavenging activity assay. These results indicate that the ethanol extract of A. gigas Kakai leaves possesses significant antioxidant properties, which suggests its great potential as a functional-food ingredient in the food industry.

• 한국환경농학회지
• /
• 제39권4호
• /
• pp.319-326
• /
• 2020

BACKGROUND: Measurement equipment was developed for inorganic nutrient concentration inside the hydroponic culture medium with several macro- and micro compositions, and applied for measuring the compositions of conventional medium. METHODS AND RESULTS: Before the equipment development, sonicator and heater were utilized to control temperature around of the module mixing with color reagents and target samples among the inorganic compositions. The measurement module and multi-sampler were also manufactured based on the COMS (Complementary Metal-Oxide Semiconductor) and installed inside the measurement equipment. Concentration of standard solution, value measured by the equipment, standard deviation or measured average value were used for estimating the accuracy and average recall of the equipment. Yamazaki solutions with EC of 0.5, 1.5, and 2.5 dS/m were offered to confirm the equipment accuracy and standard error. CONCLUSION: It was suggested that the developed equipment could be automatically applied for measurement with accuracy of over 96% and standard errors of less than 5% on 12 macro- and micro compositions such as a NO3-N, PO43- or Fe.

• 한국분말재료학회지
• /
• 제28권6호
• /
• pp.497-501
• /
• 2021

Cobalt (Co) is mainly used to prepare cathode materials for lithium-ion batteries (LIBs) and binder metals for WC-Co hard metals. Developing an effective method for recovering Co from WC-Co waste sludge is of immense significance. In this study, Co is extracted from waste cemented carbide soft scrap via mechanochemical milling. The leaching ratio of Co reaches approximately 93%, and the leached solution, from which impurities except nickel are removed by pH titration, exhibits a purity of approximately 97%. The titrated aqueous Co salts are precipitated using oxalic acid and hydroxide precipitation, and the effects of the precipitating agent (oxalic acid and hydroxide) on the cobalt microstructure are investigated. It is confirmed that the type of Co compound and the crystal growth direction change according to the precipitation method, both of which affect the microstructure of the cobalt powders. This novel mechanochemical process is of significant importance for the recovery of Co from waste WC-Co hard metal. The recycled Co can be applied as a cemented carbide binder or a cathode material for lithium secondary batteries.