• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.14-14
• /
• 2011

W (tungsten)-alloys will be the most promising plasma facing armor materials in highly loaded plasma interactive components of the next step fusion reactors due to its high melting point, high sputtering resistance and low deuterium/tritium retention. The bonding technology of tungsten to Cu alloy was one of the key issues. In this paper, W/CuCrZr diffusion bonding has been performed successfully by inserting pure metal interlay. The joint microstructure, interfacial elements migration and phase composition were analyzed by SEM, EDS, XRD, and the joint shear strength and micro-hardness were investigated. The mock-ups were fabricated successfully with diffusion bonding and the cladding technology respectively, and the high heat flux test and thermal fatigue test were carried out under actively cooling condition. When Ni foil was used for the bonding of tungsten to CuCrZr, two reaction layers, Ni4W and Ni(W) layer, appeared between the tungsten and Ni interlayer with the optimized condition. Even though Ni4W is hard and brittle, and the strength of the joint was oppositely increased (217 MPa) due primarily to extremely small thicknesses (2~3 ${\mu}m$). When Ti foil was selected as the interlayer, the Ti foil diffused quickly with Cu and was transformed into liquid phase at $1,000^{\circ}C$. Almost all of the liquid was extruded out of the interface zone under bonding pressure, and an extremely thin residual layer (1~2 ${\mu}m$) of the liquid phase was retained between the tungsten and CuCrZr, which shear strength exceeded 160 MPa. When Ni/Ti/Ni multiple interlayers were used for bonding of tungsten to CuCrZr, a large number of intermetallic compound ($Ni_4W/NiTi_2/NiTi/Ni_3T$) were formed for the interdiffusion among W, Ni and Ti. Therefore, the shear strength of the joint was low and just about 85 MPa. The residual stresses in the clad samples with flat, arc, rectangle and trapezoid interface were estimated by Finite Element Analysis. The simulation results show that the flat clad sample was subjected maximum residual stress at the edge of the interface, which could be cracked at the edge and propagated along the interface. As for the rectangle and trapezoid interface, the residual stresses of the interface were lower than that of the flat interface, and the interface of the arc clad sample have lowest residual stress and all of the residual stress with arc interface were divided into different grooved zones, so the probabilities of cracking and propagation were lower than other interfaces. The residual stresses of the mock-ups under high heat flux of 10 $MW/m^2$ were estimated by Finite Element Analysis. The tungsten of the flat interfaces was subjected to tensile stresses (positive $S_x$), and the CuCrZr was subjected to compressive stresses (negative $S_x$). If the interface have a little microcrack, the tungsten of joint was more liable to propagate than the CuCrZr due to the brittle of the tungsten. However, when the flat interface was substituted by arc interfaces, the periodical residual stresses in the joining region were either released or formed a stress field prohibiting the growth or nucleation of the interfacial cracks. Thermal fatigue tests were performed on the mock-ups of flat and arc interface under the heat flux of 10 $MW/m^2$ with the cooling water velocity of 10 m/s. After thermal cycle experiments, a large number of microcracks appeared at the tungsten substrate due to large radial tensile stress on the flat mock-up. The defects would largely affect the heat transfer capability and the structure reliability of the mock-up. As for the arc mock-up, even though some microcracks were found at the interface of the regions, all microcracks with arc interface were divided into different arc-grooved zones, so the propagation of microcracks is difficult.

• The Korean Journal of Mycology
• /
• v.44 no.1
• /
• pp.23-30
• /
• 2016

This study was conducted for comparison of ingredients, phytochemical compounds and antioxidant activity of Wofiporia extensa cultured in Gangwon-do, Gyeongsang-do, and Jeolla-do. Three contents of Wofiporia extensa were analyzed as oxygen (46~48%), carbon (38~39%), hydrogen (6.05~6.1%) and nitrogen (0.17~0.21%). The mineral contents of 50% ethanol Wofiporia extensa extracts were measured as sulfur (S) 145~149 ppm, Magnesium (Mg) 69~72 ppm, phosphorus (P) 122~154 ppm and calcium (Ca) 210.61~509.98 ppm. Wofiporia extensa from Gyeongsang-do (509.98 ppm) contained a significantly higher quantity of Ca than that from Gangwon-do (210.62 ppm) and Jeolla-do (223.88 ppm). In the gas chromatograph-mass spectrometry (GC-MS) analysis, oleic acid was identified in three 50% ethanol Wofiporia extensa extracts. In the 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulphonic acid (ABTS) assay for antioxidant activity, the $IC_{50}$ values of Wofiporia extensa cultured in Gangwon-do, Gyeongsang-do and Jeolla-do were calculated as 2.966 mg/mL, 23.03 mg/mL, and 4.16 mg/mL and 3.521 mg/mL, 12.17 mg/mL, and 7.40 mg/mL. In the ferric reducing antioxidant power (FRAP) assay, the $IC_{50}$ values of Wofiporia extensa cultured in Gangwon-do, Gyeongsang-do, Jeolla-do were 6.585 mg/mL, 19.06 mg/mL, and 18.97 mg/mL, respectively. In summary, Wofiporia extensa cultured in Gangwon-do had stronger antioxidant activity and higher concentration of oleic acid than that of Geyongsang-do and Jeolla-do. However, Wofiporia extensa cultured in Geyongsang-do contained a much higher concentration of Ca than that of Gangwon-do and Jeolla-do.

• Journal of the Korean Geographical Society
• /
• v.28 no.3
• /
• pp.247-267
• /
• 1993

According to developing international economy since the World War II, the increase and competition of the national business is so empha-sized tht both the interest and the necessity about marine transportation playing the impor-thant role of international transportation are increased. Today, the container transportation, as called the innovation of marine transport has been prevailed since the 1970's. The purpose of this paper is to grasp the spatial structure of the hinterlands and forelands, its object is export container cargo at Pusan Export Port, as known for the transportation node of modern containerlization. In this study, for the purpose of grasping the relation between hinterlands and forelands of Korean export container cargo, first, I researched the transition of carloading about container cargo, the bistribution channel of cargo, the change of the items of container and the carlo-adings about transport route, secondly, I used the cluster analysis so as to group hinterlands according to the items of goods and forelands. The object of the analysis is container cargo of Choyang Line, Hanjin Shipping and Hyundai Merchant Marine of National Frag Carriers. The source materials used in this study are Trucking Data of Hanjin Co., Container Ren-tal Data of Samik Transport Co. and Transpor-ting Present Condition Tables of Hyundai Mer-chant Marine. 1. There are two kinds of the transport classi-fied by its form: FCL and LCL. In Pusan Con-tainer Export, a lot of textile goods, clothings and furniture, compound, electric goods, and so on are dealed with but the rate of occupation of the transport is getting lower while that of occupation of equipment, papers and agricultu-ral, mineral and livestock industry higher. 2. In 1990, the transports of container cargo in Korea consist of 7 services and round-the world lines. We can list North America lines, East-South Asian lines, Japan lines and Inter European lines, in order of the quantity of tran-sport form the largest to the smaller. We can have another list that Japan lines, North Ame-rica lines and East-South lines in order of the rate participation of national flag carriers, be-cacuse Korean foreign trade lay disproportionate emphasis on East-South Asian lines. Japan lines among them is the biggest import-export market. Since the rationlization policy of marine tran-sport in 1984, each of national flag carriers have its own lines. Hanjin Shipping predominates over North America lines, Choyang Line over New Zealand, Inter European and Austria lines and Hyundai Merchant Marine over Center-South America lines, in terms of the volume of transport. And small-to-medium sized shippers are prevailing in lines which are adjacent to Korea, Such as Japan lines and East-South Asian lines. 3. In relation to hinterlands and forelands of Choyang Line, the light industry goods, electric goods and machinary produced in Seoul and Pusan are exported to the major ports in Europe and Japan, the same produces in Suwon, Ulsan, Kumi are exported to European Ports, and those in Incheon and Kwangju Austrian and Japanese ports, and those in the rest regions to the major port in Japan. 4. In relation to hinterlands and forelands of Hanjin Shipping, the light industry goods pro-ducing in Seoul and Pusan, the electric goods and machinary in Incheon and Pyeongteck, are exported to New York and Los Angeles. Electric goods and machinary Masan, Anyang, Cheona, Cheongju and Incheon, Electric goods machinary and light industry goods in Kwangju and non mental goods in Pohang, are exported New York, Los Angeles and Oakland. 5. In relation to hinterlands and forelands of Hyundai Merchant Marine, the region of Seoul, Pusan and Incheon closely related with the main ports in U.S.A. The rest regions with Montreal. The hinterlands of export container cargo can be classified by its export items into three kinds: the large city, industrial city and the rest city. Choyang Line's forelands are European lines, Japan lines and Austria lines, and Hanjin Shipping's forelands are North America lines, and Hyundai Merchant Marine's forelands are North America lines and Japan line. 3 National flag carriers' major forelands are determined by the size of port and the shipper's convenient use of the port terminal.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.10
• /
• pp.1664-1672
• /
• 2013

Solar salt is manufactured naturally, and therefore, it contains insoluble substances such as sandy compounds. This study is performed in order to effectively produce clean sea salt by removing the impurities in sea salt through filtration and evaporation in a vacuum condition. Brine was concentrated and crystallized at $90^{\circ}C$ by a rotary vacuum evaporator, which was then recovered as salt crystals by filtration, and then the salt was dehydrated. Manufacturing yields were determined by the amount of water evaporation. Brine was concentrated to 40%, 50% and 60% of the initial volume of brine and manufactured salt were designated as 40S, 50S and 60S, respectively. The salt produced by this process is called ESBS (evaporated salt with brine from salt-farm). The yield of 40S, 50S and 60S were 7.22%, 10.79% and 15.06%, respectively. The NaCl concentration of 40S and 50S were 90.38% and 91.16%, respectively. From a sensory evaluation analysis, the most tasty salt was 40S and the bitter salt was 60S. The average contents of sand compound and insoluble substances in ESBS were 0.001~0.012% and 0.067~0.12%, respectively. The mineral compositions, such as Na, Mg, K, and Ca of 40S and 50S were similar with those of the natural solar salt. In solubility tests, the solubility (g of salt/100 mL $H_2O$/sec) of 40S, 50S, and 60S was 0.69, 0.70, and 0.69, respectively. On the other hand, the solubility of natural solar salt was 0.47. By comparing the water reabsorption rate analysis results, water reabsorption rate of 40S and 50S was about 3 to 5 times lower than that of the solar salt. In the aspects of physical and chemical properties, such as minerals, impurities, solubility and moisture re-absorption rate, salts developed in this study are judged to be better than that of the general solar salt.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.8
• /
• pp.1143-1148
• /
• 2010

This research analyzed useful nutritional component data in stems and leaves of the Albizzia julibrissin for proximate composition, contents of soluble protein, reducing sugar, free sugar, total polyphenol compound, mineral, free amino acid, and amino acid derivative. The carbohydrate contents of A. julibrissin stems and leaves were 71.08% and 64.85%, and crude protein contents were 8.05% and 11.38%, respectively. In addition, the crude fat contents were 2.95% and 3.03%, and the crude ash contents were 8.98% and 9.07%, respectively. Reducing sugar and free sugar in stems were 711.80 mg% and 15.66 mg%, and 1,422.83 mg% and 40.3 mg% in leaves, respectively. The contents of soluble protein were 229.57 mg% in stems and 1,073.59 mg% in leaves. The polyphenol and flavonoid compounds were 446.67 mg% and 16.36 mg% in stems, and 2,583.33 mg% and 2,234.75 mg% in leaves. In the results of mineral analysis, the content of Ca was the highest in stems as 933.07 mg% followed by K (605.07 mg%). The content of K was also the highest (1,489.53 mg%) in leaves, and Ca was 287.73 mg%. The free amino acid content of A. julibrissin stems was 2,977.28 mg%, and 8,840.66 mg% in leaves. Total contents of amino acid derivative were 263.53 mg% in stems and 696.47 mg% in leaves.

• Journal of Applied Biological Chemistry
• /
• v.60 no.3
• /
• pp.283-291
• /
• 2017

Rice that the half of population in the world eats as a staple food is mostly produced and consumed in Asia. However, its consumption is nowadays decreasing mainly due to diet diversity. Accordingly, some attempts are in demand to enhance the utilization of rice. In this study, profiling of volatile and non-volatile flavor components in rice pastes obtained by ${\alpha}$-amylase was performed and compared according to nine different rice cultivars domestically cultivated in Korea using gas chromatography-mass spectrometry combined by solid phase microextraction and gas chromatography-time of flight-mass spectrometry after a derivatization, respectively. In total, 46 volatile compounds identified included 6 alcohols, 6 aldehydes, 4 esters, 4 furan derivatives, 4 ketones, 1 acid, 1 sulfur-containing compound, 7 hydrocarbons, 5 aromatics and 8 terpenes. The non-volatile flavor components found were composed of 12 amino acids, 6 sugars and 4 sugar alcohols. In principal component analysis, rice paste samples could be discriminated according to cultivars on the score plots of volatile and non-volatile flavor compounds. In particular, some volatile compounds such as pentanal and 4,7-dimethylundecane could contribute to distinguish Senong 17 white and Senong 17 brown, whereas ethanol, 6-methylhep-5-en-2-one, and tridecane could be highly related to the discrimination of Iipum from other cultivars. Among non-volatile compounds, some amino acids such as glycine, serine and ${\gamma}$-aminobutyric acid and some sugars such as sucrose and fructose were mainly responsible for the discrimination of Danmi from the other cultivars. On the other hand, galactose, arabitol and mannose were more closely related to Senong 17 white than Senong 17 brown.

• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.329-335
• /
• 2017

Analysis method was presented for the simultaneous determination of nine bisphenol A related compounds such as bisphenol A (BPA), phenol, p-tert-butylphenol, bisphenol A diglycidyl ether (BADGE), $BADGE{\cdot}2H_2O$, $BADGE{\cdot}2HCl$, bisphenol F diglycidyl ether (BFDGE), $BFDGE{\cdot}2H_2O$ and $BFDGE{\cdot}2HCl$ migrated from inner coatings of metal food cans by high performance liquid chromatography (HPLC) with fluorescence detection. The method was validated by examining the linearity of calibration curve, the limit of detection (LOD), the limit of quantification (LOQ), recovery and uncertainty. The migration tests of nine BPA related compounds were carried out with four food simulants; deionized water (DW), 4% acetic acid, 50% ethanol and n-heptane. There was not any compound detected in DW, 4% acetic acid and 50% ethanol at $60^{\circ}C$ for 30 min and n-heptane at $25^{\circ}C$ for 60 min. BPA and phenol were migrated into 4% acetic acid and 50% ethanol at $95^{\circ}C$ for 30 min. The concentrations were ranged from 0 to $10.77{\mu}g/L$ of BPA and from 0 to $2.35{\mu}g/L$ of phenol. Canned foodstuffs mostly have long-term shelf life. We investigated migration of nine BPA related compounds according to the variation in storage periods (0~90 days) and temperatures (4, 25 and $60^{\circ}C$). All compounds were not founded during 90 days at $4^{\circ}C$ and $25^{\circ}C$, respectively. However BPA and $BADGE{\cdot}2H_2O$ were founded in DW and 4% acetic acid at $60^{\circ}C$. The migration levels of BPA and $BADGE{\cdot}2H_2O$ were close to the value of LOQ, respectively and did not change significantly as storage period. It was founded from results that the migration of BPA related compounds from metal food cans was controlled to a safe level.

• 보존과학연구
• /
• s.33
• /
• pp.33-43
• /
• 2012

The corrosion phenomena of the iron artifacts was studied by morphology observation and instrumental analysis(EDS, XRD, Raman) with various corrosion factors in oder to verify to confirm the danger of corrosion factors. Corrosion compounds were collected by depositing pure Fe powder(99%) into a HCl, $HNO_3$, $H_2SO_4$, and $H_2O$ solution which contained the corrosion factors. Stereoscopic-microscope observations were then conducted determine the colors and shapes of the collected corrosion compounds, and SEM-EDS analysis was conducted to confirm the corrosion factors and the growth of these compounds. X-ray diffraction (XRD), Raman analyses were conducted to examine the crystal structure and compositions of the created corrosion compounds. The results of the experiment revealed that corrosion speed was faster in an acidic environment and corrosion of HCl and $H_2SO_4$ was greater than that of $HNO_3$. The corrosion compounds of HCl grew into a needle or chestnut-like shape after being affected by Cl- ion, and XRD and Raman analyses detected goethite and lepidocrocite. The corrosion compounds of $H_2SO_4$ was affected by S ion and grew into a slender-needle-like or cylindrical shape, and the XRD and Raman analyses detected goethite and lepidocrocite. The corrosion compounds of $HNO_3$ grew into a spherical or plate-like shape after being affected by O ion and the XRD and Raman analyses detected magnetite and lepidocrocite. Although the corrosion compounds of $H_2O$ grew into a spherical or plate-like shape after being affected by O ion, most of them were observed to have had spherical shapes, and the XRD and Raman analyses failed to detect corrosion compounds in them. It was found in the study that corrosion characteristics and compounds are diversely displayed according to the corrosion factor.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.43-53
• /
• 2005

This study is to define how the difference of athletic change influence on the last regrasp after somersault in Belle movement of parallel bars. For his study, the following conclusion was produced by analysis of athletic change by means of three dimensional visual image in three athlete of nation. 1. As the picture of S1, there are total used time(2.01 sec), S3(2.17 sec) and S2(2.19 sec). In case of a short needed time, it is difficult for them to perform the remaining movement of the vertical elevating flight easily and comfortably, it is judged as performing the small movement with restrict swing. 2 In the change of body center sped by each event, it is calculated as $-89.1^{\circ}$ the narrowest in S1, $-81.96^{\circ}$ the widest and then $86.34^{\circ}$ in S3. In E3 event, average compound speed is 4.07m/s, S2 showed the fastest speed of 4.14m/s whereas S1 the narrowest angle of 3.95m/s. 3. A shoulder joint and coxa are the period of mention in E3. In E4 which was pointed out the longest vertical distance, S2 that is indicated the highest vertical height as the period of detach in parallel bars. showed -3.91m. This is regarded as a preparatory movement for dynamic performance after using effectively elastic movement of shoulder joint and coxa while easily going up with turning back movement. In the 5th phrase, long airborne time and vertical change position is showed as the start while regrasping securely air flight movement from high position. 4. In E5, a long flight time and a long vertical displacement were shown as the regrasp after somersault efficiently in high position with stability from the point of the highest peak of the center of the body. Especially, S2 is marked as a little bit long position, while S1 is reversely indicated as performing somersault and unstable motion in a low position. 5. In E3, at the point of the largest extension of the shoulder joint and hip joint the shoulder joint is largely marked in $182^{\circ}$ and the hip point $182^{\circ}$ in S2. The shoulder joint is marked at the smallest angle in $177^{\circ}$ and the hip point $176^{\circ}$ in S1. And S1 is being judged by its performance of the less self - confident motion with lessening a breath of swing. S2 makes the most use of flexion and extension of the shoulder joint and the hip joint effectively. It was performed greatly with swinging and dropping the rotary movement and the rotary inertia naturally. 6. In E6, as the point of regrasp of the upper arm in parallel bars it is recognized by the that of components of vertical and horizontal velocity stably. During this study, the insufficient thing and the study on the parallel bars at a real game later are more activated than now. If it is really used as the basic materials by means of Belle Picked Study of Super E level after Bell movement, you may perceive the technique movement previously and perform without difficulty. Especially, such technique as crucifix is quite advantageous for oriental people thanks to small body shape condition. In conclusion we will nicely prepare for our suitable environment to gradually lessen trials and errors by analyzing and studying kinematically this movement.

• Microbiology and Biotechnology Letters
• /
• v.35 no.2
• /
• pp.163-172
• /
• 2007

This study was designed to investigate that inorganic germanium $(GeO_2)$ did not exist in germanium-fortified yeast or obtained to non-detectable value by current analytical methods and equipments. For this purpose, we achieved $GeO_2$ qualitative analysis protocol which could be the scientific basis of the study. Since reddish brown precipitate was formed from the reaction of $GeO_2$ with 1 equiv $NaBH_4$, and dark brown precipitate was also formed from the reaction of $GeO_2$ with 2 equiv $NaBH_4$, $GeO_2$ was qualitatively analyzed by observing these particular colored-precipitates. Because no color change was showed from the reaction between $NaBH_4$ and $SiO_2$, the color change could be caused by charge transfer transition on Ge-O and B binding properties. The reaction between $NaBH_4$ and germanium-fortified yeast did not show any color change and precipitate formation which meant no $GeO_2$ existed in germanium-fortified yeast. The reaction between $NaBH_4$ and supernatant specimen collected from the outside of dialysis membrane (MWCO 1,200 dalton) did not show any color change and precipitate formation. Therefore, we considered that the both germaniums in and outside of the dialysis membrane were organic germaniums. Germanium-fortified yeast which was biosynthesized organic germanium can be applied not only as a new functional material for improving health, prevention and treatment of chronic degenerative diseases including cancers, and the regulation of immune system, but also as a new materials.