• Journal of Aerospace System Engineering
• /
• v.9 no.3
• /
• pp.1-7
• /
• 2015

In this study, the design of compound smart materials hydraulic pump that can be applied to a small-medium size UAV having a limited space envelope and weight has been conducted. Compound Smart Material Pump(CSMP) proposed in this paper is composed of a pressurize pump and a flow pump for supplying the high pressure and fluid displacement to overcome the disadvantages of the piezoelectric actuator which has a small strain. Though this compound smart material pump has been designed as small size and lightweight as possible, it can sequentially supply the sufficient large flow rate and pressure required for the brake operation. For the design of CSMP, about 2,700 kg (6,000 lb) class fixed wing manned aircraft was selected. Based on the established requirements, the design of the CSMP have been done by strength, vibration, and fluid flow analysis.

• Korean Journal of Plant Resources
• /
• v.31 no.4
• /
• pp.342-354
• /
• 2018

Suaeda japonica is a halophytic plant that lives in mudflat at intertidal zone of western and southern coastal areas of Korea. The seawater-living plants showed a purple color during their whole life. In contrast, freshwater-living plants displayed a green color in leaves. When seawater-living plants were transferred to potting soil, the purple color was gradually changed to green in the leaves. The extracted purple pigment compound exhibited typical characteristics of betacyanin that were represented by water solubility, pH- and temperature-dependent color changes, sensitivity to light, UV-Vis spectra, and gel electrophoretic migration pattern. The LC-MS analysis of the extracted pigment compound showed the presence of two major protonated molecular ions ($[M+H]^+$) at m/z 651.1 and m/z 827.1. Antioxidant activity of the pigment compound was determined using stable free radical DPPH assay. It was found to have an antioxidant activity that is linearly increased in proportion to the reaction time for up to 30 min, and the activity was comparable to that of control BHA at 9.0 mg/ml. The anticancer activity against several tumor cell lines was also examined following the MTT assay. The significant growth inhibitory effect was observed on two tumor cell lines, SW-156 (human kidney carcinoma) and HEC-1B (human endometrial adenocarcinoma). Probably, the pigment compound may function as an osmolyte to uphold halotolerant physiological processes in saline environment.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.9
• /
• pp.1288-1294
• /
• 2021

There are a growing number of reports of hospital-acquired infections caused by pathogenic bacteria, especially methicillin-resistant Staphylococcus aureus (MRSA). Many plant products are now being used as a natural means of exploring antimicrobial agents against different types of human pathogenic bacteria. In this research, we sought to isolate and identify an active molecule from Sedum takesimense that has possible antibacterial activity against various clinical isolates of MRSA. NMR analysis revealed that the structure of the HPLC-purified compound was 1,2,4,6-tetra-O-galloyl-glucose. The minimum inhibitory concentration (MIC) of different extract fractions against numerous pathogenic bacteria was determined, and the actively purified compound has potent antibacterial activity against multidrug-resistant pathogenic bacteria, i.e., MRSA and its clinical isolates. In addition, the combination of the active compound and β-lactam antibiotics (e.g., oxacillin) demonstrated synergistic action against MRSA, with a fractional inhibitory concentration (FIC) index of 0.281. The current research revealed an alternative approach to combating pathogenesis caused by multi-drug resistant bacteria using plant materials. Furthermore, using a combination approach in which the active plant-derived compound is combined with antibiotics has proved to be a successful way of destroying pathogens synergistically.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.9
• /
• pp.1250-1256
• /
• 2023

Herein, different extracts of Scenedesmus deserticola JD052, a green microalga, were evaluated in vitro as a potential anti-aging bioagent. Although post-treatment of microalgal culture with either UV irradiation or high light illumination did not lead to a substantial difference in the effectiveness of microalgal extracts as a potential anti-UV agent, the results indicated the presence of a highly potent compound in ethyl acetate extract with more than 20% increase in the cellular viability of normal human dermal fibroblasts (nHDFs) compared with the negative control amended with DMSO. The subsequent fractionation of the ethyl acetate extract led to two bioactive fractions with high anti-UV property; one of the fractions was further separated down to a single compound. While electrospray ionization mass spectrometry (ESI-MS) and nuclear magnetic resonance (NMR) spectroscopy analysis identified this single compound as loliolide, its identification has been rarely reported in microalgae previously, prompting thorough systematic investigations into this novel compound for the nascent microalgal industry.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.28-38
• /
• 2003

Finite element analysis of cylinder heat/block compound under assembly, thermal and firing condition were performed. FE model including two cylinders with gasket, head bolts, liners and valve seats was used. FE modeling method and boundary conditions were introduced. Stress distribution and deformation of cylinder head and block under each loading condition were presented. Gasket pressure distribution and bore distortion level were predicted. Measured data of bore distortion was compared with the analysis results. The analysis result showed similar trends with the experimental data. High cycle fatigue analysis on the basis of this result has been performed in order to find the critical areas of the engine assembly.

• Progress in Medical Physics
• /
• v.28 no.1
• /
• pp.16-21
• /
• 2017

This study assessed the feasibility of a dual-channel (DC) compound method for film dosimetry. The red channel (RC) is usually used to ensure dosimetric quality using a conventional fraction dose because the RC is more accurate at low doses within 3 Gy than is the green channel (GC). However, the RC is prone to rapid degradation of sensitivity at high doses, while degradation of the GC is slow. In this study, the DC compound method combining the RC and GC was explored as a means of providing accurate film dosimetry for high doses. The DC compound method was evaluated at various dose distributions using EBT3 film inserted in a solid-water phantom. Measurements with $10{\times}20cm^2$ radiation field and $60^{\circ}$ dynamic-wedge were done. Dose distributions acquired using the RC and GC were analyzed with root-mean-squares-error (RMSE) and gamma analyses. The DC compound method was used based on the RC after correcting the GC for high doses in the gamma analysis. The RC and GC produced comparatively more accurate RMSE values for low and high doses, respectively. Gamma passing rates with an acceptance criterion of 3%/3 mm revealed that the RC provided rapid reduction in the high dose region, while the GC displayed a gradual decrease. In the whole dose range, the DC compound method had the highest agreement (93%) compared with single channel method using either the RC (80%) or GC (85%). The findings indicate that the use of DC compound method is more appropriate in dosimetric quality assurance for radiotherapy using high doses.

• Journal of the Korean Ceramic Society
• /
• v.11 no.2
• /
• pp.22-30
• /
• 1974

This study was carried out to investigate the species of iron compounds in kaolin mineral and the bonding relation between the major kaolin and its subordinate iron compound existing as incidental mineral in common clay by means of chemical composition, X-ray diffraction, thermal differential and thermogravimetrie analysis for the application of clays in the field of ceramic raw material. The domestic clay are produced abounduntly in many places, but San-Cheong kaolin, Chu-An clay, and Yeong-Am clay were selected as samples in this experiment because of their frequent utilization in porcelain industry. Two kinds of samples with low and high iron content are picked up respectively from the place of production and elutriated under two micron size to determine the properties and concentration of iron compound very fine particles or colloidal substance of low crystalline grade. Therefore, hydrothermal treatment in autoclave was conducted considering the existence of low crystalline grade of iron compounds known as an amorphoue state in X-ray diffraction pattern furthermore, de-iron treatment of hydrothermal compound was done in order to identify the related iron compound before and after hydrothermal reaction and iron compound which is one of the samples was synthesized for the determination of their compounds state in more detail. The obtained results in this study are as follows: In San-Cheong kaolin, Chu-An clay and Yeong-Am clay 1) It is proved that species accompanying iron compound is $\alpha$-FeOOH form. 2) Iron compound is composed of very fine particles or colloidal substance. 3) The iron substance encircles the fine parts of clay minerals under 2 micron and acts as cementizing agent.

• Korean Journal of Plant Resources
• /
• v.33 no.4
• /
• pp.237-244
• /
• 2020

The objective of this study was to identify and characterize fibrinolytic compound from Cornus officinalis. Cornus officinalis. Hot water extract was fractionated into hexane, chloroform, ethyl acetate, butanol, and water fractions. Assays for fibrinolytic activity indicated that only the ethyl acetate fraction had significant efficacy at 1.36 plasmin units/mL. Isolation of fibrinolytic compound was carried out on Amberlite IRA-400, Sephadex LH-20 and active charcoal column chromatography. HPLC analysis of the purified fibrinolytic compound showed retention time (RT) same as authentic malic acid. LC / MS / MS in negative mode showed the same peak at m/z 133, confirming that the purified compound was malic acid with a molecular weight 134 Da. The compound showed fibrinolytic activity of 0.69 plasmin units/mL, 14.62% of thrombin inhibitory activity, 6.42% of antioxidative activity, and 17.28% of α-glucosidase inhibitory activity. The purified compound hydrolyzed γ subunits of human fibrinogen. In conclusion, malic acid isolated from Cornus officinalis might have potential to be developed as ingredient for biofunctional foods to prevent cardiovascular diseases.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.221-226
• /
• 1990

This experiment was performed to identify and isolate a growth inhibiting compound from Aralia continentalis. In order to isolate the growth inhibiting compound from Aralia continentalis the bioassay test of lettuce seed germination and rice seedling growth were used. Through these bioassays the growth inhibiting compound which was spotted at $R_f$ 0.51 on Tlc was isolated. This compound inhibited the lettuce growth by 79% at the concentration of 1000ppm. When sprayed with $FeCl_3$ reagent, it developed a bule spot. It had UV-absorbance at 217 nm and 342 nm, and $OH^-$ of $3600cm^{-1}$, C=O of $1700cm^{-1}$, C=C of $1600cm^{-1}$, and C-O of $1200cm^{-1}$ on IR spectrum. Through HPLC analysis this compound was identified as a ferulic acid ($C_{10}H_{10}O_4$) having 25 min. retention time.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.2
• /
• pp.49-57
• /
• 2024

We investigated the changes in microstructure and surface roughness of the compound layer of GC250D gray cast iron, commonly used in brake discs, during gas nitriding. The gas atmosphere of the nitriding process was controlled with a hydrogen partial pressure of 49.5%, and the process was conducted at a nitriding temperature of 520℃ with various process times. As the nitriding process time of the GC250D material increased, both the depth of hardening and the thickness of the compound layer increased, with a maximum surface hardness of approximately 1265 HV_0.1 was measured. Additionally, the surface roughness increased with the process time. Phase analysis of the compound layer revealed an increase in the proportion of the γ' phase as the nitriding process time increased. Changes in the formation of the compound layer were observed depending on the orientation of graphite within the material, leading to the formation of wedges. Therefore, the increase in surface roughness appears to be attributed to the uneven compounds, the expansion of the compound layer and wedges formed on the surface during the nitriding process.