• Tribology and Lubricants
• /
• 제13권1호
• /
• pp.42-52
• /
• 1997

This paper deals with wear characteristics of ion-nitrided metal theoretically and experimentally in order to analysis of wear phenomena. Wear tests show that compound layer of ion-nitrided metal reduces wear rate when the applied wear load is mall. However, as th load becomes large, the existence of compound layer tends to increase wear rate. The residual stress at the surface of ion-nitrided metal is measured, and the internal stress distribution is calculated when the normal and tangential forces are applied to the surface of metal. Compressive residual stress is largeest at the compound layer, and decreases as the depth from the surface increases. Calculation shows that the maximum stress exists at a certain depth from the surface when normal and tangential force are applied, and that the larger the wear load is the deeper the location of maximum stress becomes. In the analysis, it is found that under small applied wear load the critical depth, where voids and cracks may be created and propagated, is located at the compound layer, as the adhesive wear, where hardness is an important factor, is created the existence of compound layer reduces the amount of wear. When the load becomes large the critical depth is located below the compound layer, and delamination, which may be explained by surface deformation, crack nucleation and propagation, is created, and the existence of compound layer increases wear rate.

• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2002년도 Language, Information, and Computation Proceedings of The 16th Pacific Asia Conference
• /
• pp.79-91
• /
• 2002

Structural analysis of compound words is necessary and an important process in natural language processing. Proposed here is a corpus- and statistics- based method for the structural analysis of compound words in Japanese. We determine the structure of a compound word by using Internet corpus and calculating the strength of word association among its constituent words. Experiments with 5, 6, 7, and 8 kanji compound words show that our method works well and its performance is better than those of other comparable studies.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.454-460
• /
• 2013

We present qualitative and quantitative component analyses on compound explosives via Terahertz time-domain spectroscopy (THz-TDS) based on a combination of wavelet thresholding and wavelength selection. Despite its importance, the field of signal processing of THz signals of compound plastic explosives is relatively unexplored. In this paper, experiment results from explosives Composition B-3 and Pentolite are newly presented, suggesting a novel signal processing procedure for in situ compound explosives detection. The proposed signal processing method demonstrates effective component analysis even in noisy and humid environments, showing significant decrease in component concentration percentage error of approximately 22.7% for Composition B-3 and 48.8% for Pentolite.

• Journal of Information Technology Applications and Management
• /
• 제11권4호
• /
• pp.95-102
• /
• 2004

This paper proposes a method of segmenting compound nouns which include unregistered nouns into a correct combination of unit nouns using characteristics of person's names, loanwords, and location names. Korean person's name is generally composed of 3 syllables, only relatively small number of syllables is used as last names, and the second and the third syllables combination is somewhat restrictive. Also many person's names appear with clue words in compound nouns. Most loanwords have one or more syllables which cannot appear in Korean words, or have sequences of syllables different from usual Korean words. Location names are generally used with clue words designating districts in compound nouns. Use of above characteristics to analyze compound nouns not only makes segmentation more accurate, helps natural language systems use semantic categories of those unregistered nouns. Experimental results show that the precision of our method is approximately 98% on average. The precision of human names and loanwords recognition is about 94% and about 92% respectively.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1829-1834
• /
• 2001

The choking of dual subsonic streams flowing through a convergent duct in contact has been investigated experimentally and theoretically. The experiment was conducted by using blow-down wind tunnel. The condition, when the dual stream flow chocking (compound choking) occurs at the nozzle exit, was explained by one-dimensional analysis of compound sound wave propagation. The experimental results for the condition of compound choking were compared with the prediction from theoretical analysis, and the schlieren optical method using the spark light source has been used to visualize the flowfield.

• 복식
• /
• 제57권1호
• /
• pp.93-104
• /
• 2007

This study is considered about the fabrics culture of Baekje Period by analyzing the fabrics pieces at a inner part of the It-bronze shoes found at the tomb of King Mu-ryeong in 1971 AD. The analysis methods of the fabrics pieces are a photographing of fabrics pieces surface by VMS, Digital camera(Nikon Coolpix 995) and the analysis of samples by SEM, XRD and FT-IR. It is assumed this fabrics pieces are the inner shoes, which consisted of compound woven silk at outward, some of tabby and a hemp at inward and the braids for decoration, of the gilt-bronze shoes. The features are as follows. 1. All of compound woven silk are the warp-faced compound tabby of plain fabrics and the density is various from high to low one. Compound woven silk which is attached the gilt-bronze shoes of the tomb of King Mu-ryeong weaves in high density by a thick thread. The fibers material of compound woven silk prove to be a silk by the analysis of wrap samples by SEM, XRD and FT-IR. 2. Tabby are excavated under the condition which attached on reverse side of compound woven silk. Those ran classify two types. First, the fine weaving by high density of wrap and weft. Second, the loose warp weaving with one warp and some of weft. 3. Hemp is almost ramie by SEM analysis and the density is different. Ramie which supposed to be attached Guem has the very low density. In addition to, Ramie pieces, excavated in condition and weaved finely, proved the conspicuous weaving skill in Baekje period. 4. Various kinds of braid are found and these ones classifies by fiber material and entwining way. Two types out of these are the one of silk thread, decorates the upper, middle parts of compound woven silk shoes and the other of hemp thread, decorates the lower parts.

• 열처리공학회지
• /
• 제1권1호
• /
• pp.8-12
• /
• 1988

This study has been carried out to evaluate gaseous nitrocarburizing treatment undertaken for pure iron at $570^{\circ}C$ in an atmosphere containing 50% endothermic gas, generated from natural gas, and 50% ammonia. The results obtained from the experiment are as follows ; 1) The microstructure of gaseous nitrocarburized pure iron consists of the compound layer on the surface and the diffusion zone beneath it. The compound layer progresses uniformly into ferrite with a thickness of $20{\mu}$ obtained after treating for 3 hours. 2) Chemical analysis has shown that the compound layer has a C/N ratio of 0.19 and that the average combined interstitial content of the compound layer is about 30 atomic percent, which is close to the lower limit of the ${\varepsilon}$-carbonitride phase field in Fe-C-N phase diagram. 3) X-ray diffraction analysis has revealed that the compound layer consists mainly of the c.p.h. phase, ${\varepsilon}-Fe_3$(C.N) and a small amount of $Fe_4N$ and traces of ferrite are also present in the compound layer. 4) The microhardness of the compound layer is about 600 V.H.N and shows a relatively sharp fall-off at the compound layer/diffusion zome interface. 5) The average actual degree of ammonia dissociation is calculated to be 27% for a gaseous nitrocarburizing treatment carried out at $570^{\circ}C$.

• BMB Reports
• /
• 제29권5호
• /
• pp.423-428
• /
• 1996

A superoxide anion radical scavenger isolated from Capsella bursa-pastoris was characterized by infrared (IR) spectroscopy, sugar analysis, ultraviolet (UV) spectroscopy, $^{1}H$ and $^{13}C$ nuclear magnetic resonance (NMR) spectroscopies, and fast atom bombardment (FAB) mass analysis. The compound was assumed to be a flavonoid-O-glycoside from IR spectrum and UV absorption maxima. When the sugar composition of the compound was examined by thin layer chromatography (TLC) and gas chromatography (GC) of the acid hydrolysate, only glucose was detected. According to the results of UV spectrotroscopy by using shift reagents, the compound was supposed to be luteolin (5,7,3',4'-tetrahydroxy flavone) or chrysoeriol (5,7,4'-trihydroxy-3'-methoxy flavone) with glucose. Based on $^{1}H$- and $^{13}C-NMR$ spectroscopies, the compound was deduced as 7,4'-dihydroxy-5,3'-dimethoxy-${\alpha}$-6-c-glucosyl-${\beta}$-2"-o-glucosyl flavone. In FAB mass analysis the compound was finally characterized as 7,4'-dihydroxy-5,3'-dimethoxy-${\alpha}$-6-c-glucosyl-${\beta}$-2"-o-glucosyl flavone ($C_{29}H_{34}O_{16}$, M.W.=638).

• 분석과학
• /
• 제13권4호
• /
• pp.534-538
• /
• 2000

The title compound, $[Co(H_2O)_6](CH_3C_6H_4SO_3)_2$, has been prepared and characterized by X-ray crystallography. The crystal structure of the compound demonstrates a layered material constituted by hexaaquacobalt (II) cations and p-toluenesulfonate anions. Geometrical environment of the cobalt atom is octahedrally coordinated by water molecules. The p-toluenesulfonate anions are arranged with the sulfonate groups turned toward opposite side of the layer, alternately. The layered structure is stabilized by the hydrogen bondings between the ligated water molecules and the anionic sulfonate oxygen atoms.

• Tribology and Lubricants
• /
• 제13권2호
• /
• pp.96-104
• /
• 1997

This paper was focused on the wear characteristics of ion-nitrided metal and with ion-nitride processing, which is basically concerned with the effects of carbon content in workpiece and added carbon content gas atmosphere on the best wear performance. Increased carbon content in workpiece increases compound layer thickness, but decreases diffusion layer thickness. On the other hand, a small optimal amount of carbon content in gas atmosphere increase compound layer thickness as well as diffusion layer thickness and hardness. Wear tests show that the compound layer of ion-nitrided metal reduces wear rate when the applied wear load is small. However, as the load becomes large, the existence of compound layer tends to increase wear rate. Compressive residual stress at the compound layer is the largest at the compound layer, and decreases as the depth from the surface increases. It is found in the analysis that under small applied load, the critical depth where voids and cracks may be created and propagated is located at the compound layer, so that the adhesive wear is created and the existence of compound layer reduces the amount of wear. When the load becomes large, the critical depth is located below the compound layer and delamination, which may explained by surface deformation, crack nucleation and propagation, is created and the existence of compound layer increases wear rate. For the compound layer, at added carbon contents of 0 percent and 0.5 at. percent, the $\varepsilon$ monophase is predominant. But at 0.7 at. percent added carbon, the $\varepsilon$ monophase formation tends to be severely inhibited and r' and $Fe_3C$ polyphase formation becomes dominant. This increased hard $\varepsilon$ phase layer was observed to be more beneficial in reducing friction and wear.