• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1122-1131
• /
• 2000

The efficiency of thesytem depends upon an accurate extraction capability of index terms in the system of information search or in that of automatic index. Therefore, extraction of accurate index terms is of utmost importance. This report presents the generation methods of composition noun for efficient index term extraction by using words of high frequency appearance, so that the right documents can be found during information search. For the sake of presentation of this method, index terms of composition noun shall be extracted by applying the rule of composition and disintegration to the nouns with high frequency of appearance in the documents, such as those with upper 30%∼40% of frequency ratio. In addition, for he purpose of effecting an inspection of validity in relation to a composition of high frequency nouns such as those with upper 30∼40% of frequency ratio as presented in this report, it proposes an adequate frquency ratio during noun composition. Based upon the proposed application, in this short documents with less than 300 syllables, low frequency omissions were noticed, when composed with nouns in the upper 30% of frequency ratio; whereas the documents with more than 30 syllables, when composed with nouns in he upper 40% of frequency ration, had a considerable reduction of low frequency omissions. Thus, total number of index terms has decreased to 57.7% of these existing and an accurate extraction of index terms with an 85.6% adequacy ratio became possible.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.399-402
• /
• 2002

This paper is researched that electric characteristic of Digital x-ray radiography technique with changing composition ratio of Iodine. Dopant material, Iodine is evaporated with amorphous selenium. Thorugh the old papers say, doponted Iodine will be down the created trap level because of Arsenic dopant material in amorphous selenium. Arsenic material of Composition ratio in amorphous selenium is fixed with 0.3% and test sample is deposited composition of 30, 100, 300, 500, 700ppm with thermal evaporate system. Experimental measurement is performed by dark current and x-ray sensitivity in amorphous selenium based radition detector sensor. Fabricated test sample thickness is $30{\mu}m$ and injected voltage is $3{\mu}m$，$6{\mu}m$，$9{\mu}m$ to both electrode. Experimental results showed that the net charge of composition rate of 30ppm is 398.88 pc/mR/$cm^2$ very high. And increase of the Iodine composition ratio is tendency to the decrease of net charge. Doping changing composition of Iodine in amorphous selenium detector offered to basical information of amorphous selenium material.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1548-1562
• /
• 2003

This paper is the first of several companion papers which compare the methods of Air-fuel ratio determination. There are many methods which calculate Air-Fuel ratio from exhaust emission. Most of them are based on the simple chemical equations, which use balance of atom, and the error of the calculation is negligible as far as the instrumentation accuracy is guaranteed. They assume homogeneous mixture and complete combustion to the extent of oxygen availability. Because of these simple assumptions, they cannot offer the information about the fuel distribution state and the malfunction of instrument. For these limitations, Eltinge offered new one based on stricter mathematical model. This result coincides with the others very well and gives more information about the mixture state and instrumentation. Consequently this might be a general solution for Air-fuel ratio determination and exhaust composition. The objects of the calculation, however, were not commercial fuels except gasoline and the compensation method of unburned hydrocarbon was not appropriate to recent analyzer. Moreover he did not consider the fuel which contains oxygen, such as methanol, ethanol and blend of gasoline-alcohol. In this paper, Eltinge chart is expanded to the arbitrary fuel composition as the reference exhaust compositions for the purpose of further discussions about Air-fuel ratio determination methods and the charts fur gasoline, diesel, methanol, M85, liquefied petroleum gas(LPG), natural gas(NG), propane, butane are illustrated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.319-323
• /
• 2002

Recently, new polishing system which was made by magnetic intelligent compound (MAGIC) was invented and, the study is going on for practical use the analysis of factors, that is, the kind of polishing grain, composition ratio of wheel elements, machining frequency, polishing pressure, which the main influence for polishing efficiency are the first step. In this study, analyzed influence of wheel raw material composition ratio on surface roughness.

• Journal of the Korean institute of surface engineering
• /
• v.45 no.3
• /
• pp.136-141
• /
• 2012

'Jikjisimcheyocheal (Jikji afterwards)' is known as a first book printed by the metal type in the world. The metal type used for printing this book has not been found yet. To help for replicating the original metal type, it is required to investigate the composition analysis of the copied metal type. In this study, the composition analysis and thermodynamic care for replicating of ancient metal type was performed on the basis of an analytical reports concerned with the ancient metal type which made after Jikji printing. Metal types were made by remelting and casting of the mother alloy which came from a cast of a mixed metals in accordance with the composition revealed in the literatures. Change of composition during remelting of mother alloy and casting of metal was detected by the EDS analysis. The reasons for variation in composition were discussed by metallurgical and thermodynamic point of view, and a mixing ratio of metals to get the original composition of ancient metal type is suggested. Some attention should be paid on mixing, melting and casting of metals to get an objected composition for copy of ancient metal type.

• 한국초전도학회:학술대회논문집
• /
• v.13
• /
• pp.72-72
• /
• 2003

• Journal of the Korean Institute of Rural Architecture
• /
• v.20 no.1
• /
• pp.61-68
• /
• 2018

This study aims to investigate the changes in area ratios by space through floor plans of national leasing houses constructed by the LH in Jangseong-gun, particularly focusing on the floor plans of public leasing housing complexes built during the 1970s-80s and those during the 2010s. The results are as follows: First, according to the composition ratio of floor plans by period, the type of Bedroom> Livingroom> Common Area> Kitchen+Dining> Multi-purpose room> Bathroom> or the type of Bedroom> Livingroom> Kitchen/Dining> Common Area> Bathroom> Multi-purpose room were found to be high during the 1970s. Whereas, the type of Common Area>Living room(Kitchen/Dining included)>Bedroom>Bathroom>Front Entrance was found to be high during the 2010. It can be concluded that the ratio of Bedroom and Living room was found to be high during the 1970s, but after 2010s, the spacial composition ratio of Common Space, Living room, and Bedroom is getting higher in the order. Second, in terms of the composition ratio of floor plans by the area of unit household, among the floor plan of C-1, B-2, B-3, C-2 which were used since 2010s, the spatial ratio of Bedroom was maintained in the range of 20%; while during the 1970s, the Bedroom space of A-1(46%), A-2(46%), and A-3(41%) was found to be higher than 40%. It can be concluded that the size of bedroom space has doubled over time. In terms of the changes in the spatial ratio of Living room, A-1(15%), A-2(22%), and A-3(23%) were found during the 1970s. Compared to the recent floor plans of C-1(28%), B-2(25%), B-3(33%), and C-2(34%) which are applied in Jangseong-gun, Jeollanam-do province, no big changes have been found, particularly in the small floor plans (20% range).

• Physical Therapy Korea
• /
• v.14 no.2
• /
• pp.44-52
• /
• 2007

This study was carried out to compare the muscle activities of the shoulder stabilizers between persons with and without winging scapular during push-up plus exercise (adds the scapular protraction to the general push-up exercise). For this study, eleven males with winging scapular and eleven healthy males were recruited. Surface electromyographic (EMG) activity was recorded from the serratus anterior, upper trapezius, lower trapezius, infraspinatus, and pectoralis major while the subjects performed the push-up plus. Each push-up plus was subdivided into three phases according to the elbow position which was measured using the 3-D motion analysis system: elbow flexion (EF), elbow extension (EE), and shoulder protraction phases (SP). Two-way repeated measure ANOVA (phase ${\times}$ group) were used for statistical analysis. There was significant phase by group interaction only on the EMG composition ratio of the serratus anterior (p>.05). The EMG composition ratio of the serratus anterior was significantly higher in SP than in either EF or EE however, it was not different between winging scapular and normal groups. For both groups, the EMG composition ratio of upper trapezius, lower trapezius, and pectoralis major was significantly different across the phases of push-up plus, but the infraspinatus EMG composition ratio was not. For both groups, in EF and EE phases, the EMG composition ratio of both pectoralis major and serratus anterior were relatively higher than that of other muscles. However, in both groups, the EMG composition ratio of the serratus anterior became much more predominant than that of the pectoralis major. In addition, infraspinatus activated greater than pectoralis major. These results showed that the push-up plus exercise is effective to selectively strengthen the serratus anterior for both individuals with and without winging scapular, but not equally effective for other shoulder stabilizers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.3-3
• /
• 2010

We investigated the influence of the indium content on the threshold voltage ($V_{th}$) shift of sol-gel-derived indium-gallium-zinc oxide (IGZO) thin film transistors (TFTs). Surplus indium composition ratio into IGZO decreases the value of $V_{th}$ of IGZO TFTs showed huge $V_{th}$ shift in the negative direction. $V_{th}$ shift decreases from 10 to -28.2V as Indium composition ratio is increased. Because the free electron density is increased according to variation of the Indium composition ratio.

• KSBB Journal
• /
• v.8 no.2
• /
• pp.178-184
• /
• 1993

Extractive fermentations with the extract of Jerusalem artichoke in an aqueous-two-phase-system of polyethyleneglycol(PEG) and dextran(Dx) were investigated to obtain the effects of composition of PEG and Dx on both fermentation ,characteristics and partition ratio of alcohol. The specific growth rate of K. Fraglis CBS 1555 increased with a decrease of concentration of PEG and Dx. It augmented along with concentration of initial sugar up to 80g/l but decreased thereafter. The specific production rate of alcohol showed a rising tendency up to 100g/lof initial sugar, whereafter represented a decreasing trend. The partition ratio of alcohol between two phases augmented according to decrease of Dx comic. and increase of PEG cone. regardless of initial sugar concentrations. The ratio, however, decreased with Increment of initial sugar concentration at constant composition of PEG and Dx. The partition coefficient of alcohol had an ascending effect to the increase of PEG cone, but it had little effect on the changes of concentrations of Dx and initial sugar. The present study suggests that the optimum composition of PEG and Dx in the aqueous-two-phase-system by extractive fermentation were around 6.5%(w/v) of PEG and 3%(w/v) of Dx in considerations of emulsion state, sedimentation and separation of two phases, alcohol partition ratio, and specific growth rate.