• Asian-Australasian Journal of Animal Sciences
• /
• 제21권12호
• /
• pp.1689-1695
• /
• 2008

Leptin, the hormone product of the obese gene, is secreted predominately from white adipose tissue and regulates feed intake, energy metabolism and body composition. It has been considered a candidate gene for performance, carcass and meat quality traits in beef cattle. The objective of this study was to identify SNPs in the promoter region of the leptin gene and to evaluate the possible association of the SNP genotypes with carcass and meat quality traits in Korean cattle. We identified a total of 25 SNPs in the promoter region (1,208-3,049 bp upstream from the transcription start site) of the leptin gene, eleven (g.1508C>G, g.1540G>A, g.1545G>A, g.1551C>T, g.1746T>G, g.1798ins(G), g.1932del(T), g.1933del(T), g.1934del(T), g.1993C>T and g.2033C>T) of which have not been reported previously. Their sequences were deposited in GenBank database with accession number DQ202319. Genotyping of the SNPs located at positions g.2418C>G and g.2423G>A within the promoter region was performed by direct sequencing and PCR-SSCP method to investigate the effects of SNP genotypes on carcass and meat quality traits in Korean cattle. The SNP and SSCP genotypes from the two mutations of the leptin promoter were shown to be associated with the BF trait. The average BF value of animals with heterozygous SNP genotype was significantly greater than that of animals with the homozygous SNP genotypes for the g.2418C>G and g.2423G>A SNPs (p<0.05). Analysis of the combined genotype effect in both SNPs showed that animals with the AC SSCP genotype had higher BF value than animals with BB or AA SSCP genotypes (p<0.05). These results suggest that SNP of the leptin promoter region may be useful markers for selection of economic traits in Korean cattle.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제48권4호
• /
• pp.411-416
• /
• 2015

Olive flounder Paralichthys olivaceus production has increased gradually in recent years, but prices have fallen. Thus, the development of a variety of processed foods incorporating olive flounder would help to increase the income of fishermen. This study was conducted to investigate the best method for olive flounder ball processing. Clean olive flounder were divided into five portions. Olive flounder meat (100 g with added egg white 39 g) was chopped and then mixed with 10 mL fresh cream and ingredients. The dough was molded into the shape of a ball. The olive flounder balls were then processed by two different methods. In the first method, the flounder ball was boiled in water for 3 min then vacuum-packed in polyethylene film and stored at $-20^{\circ}C$ for 7 days. After 7 days, the ball was thawed and heated in a microwave for 2 min (Sample-1). In the second method, the ball was vacuum-packed in polyethylene film without boiling and then stored at $-20^{\circ}C$ for 7 days before thawing and boiling in water for 3 min (Sample-2). After heating, both types of olive flounder balls were evaluated. Various factors (including the viable bacterial count, chemical composition, pH, hardness, thiobarbituric acid level, salinity, and free amino acid content) were measured, and a sensory evaluation was conducted. Based on the results of the sensory and hardness evaluations, Sample-1 was deemed to be superior to Sample-2.

• Korean Chemical Engineering Research
• /
• 제52권4호
• /
• pp.443-450
• /
• 2014

Selective catalytic reduction of nitrogen monoxide by hydrogen ($H_2$-SCR of NO) over platinum catalysts impregnated on zirconia-incorporated silica ($ZrO_2-SiO_2$) and manganese oxide ($MnO_x$) was investigated. $Pt-MnO_x$ catalyst showed low conversions and low yields of $N_2O$ and $NO_2$ at $100{\sim}350^{\circ}C$. On the other hand, NO conversions over $Pt/ZrO_2-SiO_2$ were very high, but $N_2O$ was predominantly produced at $100-150^{\circ}C$ and the yield of $NO_2$ increased with temperature at $200-300^{\circ}C$, resulting in poor $N_2$ yields. $Pt-MnO_x/ZrO_2-SiO_2$ exhibited a small enhancement in $N_2$ yield at $100-150^{\circ}C$ due to the synergy of $MnO_x$ and $ZrO_2-SiO_2$. The surface composition and oxidation state of the catalyst components and the acidity of the catalysts were examined. IR spectra of the adsorption of NO and their subsequent reactions with hydrogen on these catalysts were also recorded. The variations of conversion and product yield according to the catalyst components in the $H_2$-SCR of NO were discussed in relation to their catalytic roles.

• Journal of Korea Soil Environment Society
• /
• 제2권1호
• /
• pp.35-44
• /
• 1997

A column study using artificial acid rain was conducted to evaluate the buffering capacities in soil layer and host rock. In an effort to compare the effect of composition of host root two valleys of which compositions of host rock are different were chosen within the study area and the pHs of the water flowing in the valleys were measured from May, 1996 to October, 1996. The pHs of the artificial acid rain prepared by adding appropriate amounts of both sulfuric and nitric acids to distilled water were 3, 4, and 5, and the column effluents were analyzed for major cations and anions. The cation exchange capacities(CECs) of A Horizon and the B Horizon were 9.68 and 6.16 meq/100g, respectively, Compared to the B Horizon, the pH in the column effluent of A Horizon with larger CEC was higher. The sums of $Ca^{2+}$, $Mg^{2+}$, $Na^{+}$in the column effluents gradually decreased, indicating the loss of CEC by acid rain. The field study showed that pHs of the surface water in the valleys increased as the water flows downwards. The magnitude of this buffering capacity was greater for the valley in which smectite in addition to kaolinite and illite was a weathered product of host rocks. This also indicates that host rock as well as soil layer retains the buffering capacity.

• Clean Technology
• /
• 제23권1호
• /
• pp.104-112
• /
• 2017

Hydrogen production via steam reforming of liquefaction liquid from marine algae over hydrothermal liquefaction was carried out at 873 ~ 1073 K with a commercial catalyst and Ni based $K_2Ti_xO_y$ added catalysts. Liquefaction liquid obtained by hydrothermal liquefaction (503 K, 2 h) was used as a reactant and comparison studies for catalytic activity over different catalysts (FCR-4-02, $Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, $Ni/K_2Ti_xO_y-ZrO_2/CeO_2$ and Ni/$K_2Ti_xO_y$-MgO), reaction temperature were performed. Experimental results showed Ni/$K_2Ti_xO_y$ based catalysts ($Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, Ni/$K_2Ti_xO_y-ZrO_2$/ $CeO_2$ and Ni/$K_2Ti_xO_y$-MgO) have a higher activity than commercial catalyst (FCR-4-02) and In particular, a product composition was different depending on support materials. An acidic support ($Al_2O_3$) and a basic support (MgO) led to a higher selectivity for CO while a neutral support ($SiO_2$) and a reducing support ($ZrO_2/CeO_2$) resulted in a higher $CO_2$ selectivity due to water gas shift reaction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제41권10호
• /
• pp.1356-1362
• /
• 2012

UV-VIS spectrophotometric and high-performance liquid chromatographic (HPLC-DAD) methods were applied in order to identify and quantify the composition of polyphenols in commercial cocoa-containing products. Total polyphenolic contents of cocoa mix, choco-syrup, milk chocolate, and dark chocolate were evaluated using Folin-Ciocalteu's phenol reagent according to a UV-VIS spectrometric method. Antioxidant capacities of cocoa extracts by methanol were evaluated by 2,2'-azino-bis(3-ethyl benzothiazoline-6-sulfonic acid) (ABTS) assay and 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay. The obtained results show that the polyphenolic contents and antioxidant capacities of cocoa products and chocolates depend on solid cocoa content. Among the tested cocoa products and chocolates, the most abundant phenolic compound was epicatechin.

• Journal of Environmental Health Sciences
• /
• 제21권4호
• /
• pp.1-9
• /
• 1995

This study was carried to investigate the biodegradability of phenol in the wastewater with the two sludge blanket-packed bed reactor in series. Each reactor had a dimension of 0.09 m i.d. and 1.5 m height and consisted of two regions. The lower region was a sludge blanket of 0.5 m height and the upper region was a packed-bed of 1 m height. The packed bed region was charged with ceramic raschig rings of 10 mm i.d., 15 mm o.d. and 20 mm length. The reactors were operated at 35$\circ$C and the hydraulic retention time(HRT) was maintained 24 hours. The synthetic wastewater composed of glucose and phenol as major components was fed into the reactor in a continuous mode with incereasing phenol concentration. In addition, the nutrient trace metals($Na^+, Mg^{2+}, Ca^{2+}, PO_4^{3-}, NH_4^+, Co^{2+}, Fe^{2+}$ etc.) were added for growing anaerobes. The phenol concentration of the effluent, the overall gas production, the composition of product gas, the efficiency of COD reduction and the duration of acclimation period were measured to determine the performance of the anaerobic wastewater treatment system as the phenol concentration of the influent was increased from 600 to 2400 mg//l. Successfully stable biodegradation of phenol could be achieved with the anaerobic treatment system from 600 to 1, 800 mg/l of the influent phenol concentration. The upper level of influent phenol loading was high enough to meet most of the practical requirement. The duration of acclimation increased with the phenol loading. At steady state of the influent phenol concentration of 1800 mg/l, the treatment performance indicated the phenol reduction efficiency of 99%, the COD reduction efficiency of 99% and the gas production rate of 37 l/day. At the influent phenol concentration of 2400 mg/l, however, the operation of the treatment system was noted unstable. While the concentration of methane in biogas decreased with increasing the influent phenol loading, the carbon dioxide was increased. However, the concentration of hydrogen was varied negligibly. The concentration of methane was high enough to be used as a fuel. As a result, it is suggested that anaerobic phenol wastewater treament was economical in the sense of energy recovery and wastewater treatment.

• Journal of fish pathology
• /
• 제27권1호
• /
• pp.47-56
• /
• 2014

Propolis is a beehive product with a very complex chemical composition, widely used in folk medicine because of its several therapeutic activities. This study was conducted to measure the efficacy of propolis on non-specific defense reactions, specific immune response, and protection levels against pathogen challenge with Streptococcus iniae. in vitro and in vivo. In vitro, the phagocytic activity and NBT assay of peripheral blood leukocytes (PBL) were evaluated in a various propolis extractsconcentrations (0, 10, 50, 100, 150, 250 and $500{\mu}g/ml$). The optimal concentration showing activation of propolis extracts was determined to $100{\mu}g/ml$. In vivo, they were divided into four groups (PBS, propoli extractss, vaccine, propolis extracts + vaccine) in vivo. Fish were received i.p. injection of either PBS or propolis extracts, and in the presence or absence of formalin inactivated S. iniae ($1{\times}10^8$ CFU/fish), respectively. The level of haematocrit is not affected among experimental groups. The phagocytic activity and the NBT reduction activities of head kidney phagocyte were markedly (p<0.05)augmented in the propolis extracts groups than in the PBS-control group, respectively. The level of serum lysozyme activity was significantly (p<0.05) increased in the propolis extracts treated groups than in the PBS-control group. The agglutinin titer was significantly (p<0.05) enhanced in the vaccine+propolis extracts group than in the vaccine group, but there was no difference between PBS-control and propolis treated group. The results of the present study suggest that propolis extracts seems to be a promising compounds of non-specific immune stimulator, also being able to use a good adjuvant.

• Korean Journal of Food Science and Technology
• /
• 제24권6호
• /
• pp.574-580
• /
• 1992

Chitin was isolated from the residue of enzymatically hydrolyzed crab, Portunus trituberculatus, and further deacetylated by alkaline boiling to make chitosan. The physical properties of chitosan solution and its film forming properties were examined. The functional characteristics of chitosan film were compared to those of cellophane, polyvinyl chloride (PVC) and polyethylene (PE) films. The proximate chemical composition of chitin obtained from crab residue was 6.95% nitrogen, 0.3% crude ash and 4.57% moisture and the product yield was 12.8% based on a dry material basis. The degree of deacetylation of chitosan was $79{\sim}92%$ and $70{\sim}86%$ as determined by IR spectroscopy, and $70{\sim}86%$ as determined by colloid titration method each respectively. The chitosan at 1% acetic acid solution showed distinct pseudoplastic flow behavior. The flow behavior index and consistency index were 0.8886, 0.2084 $MPa{\cdot}s^n$ for 0.4% solution and 0.8498, 0.6190 $MPa{\cdot}s^n$ for 0.8% solution, respectively. The chitosan film had the highest tensile strength $(888 kg/cm^2)$ and water permeability $(100\;g/m^2{\cdot}24\;hrs)$ among the tested films, but relatively low elongation property (49%). It showed the similar tear strength (90kg/cm) and light permeability (87.7%) to other films tested in spite of the relatively high haze value (12.5%). As the thickness of chitosan film increased from 0.025 to 0.050 mm, the tensile strength of film decreased distictively, and the degree of elongation, tear strength, and water permeability of film also decreased slightly. Whereas the light permeability of film did not change and the haziness of film slightly increased by the increase of film thickness.

• Advances in concrete construction
• /
• 제10권5호
• /
• pp.403-416
• /
• 2020

This study investigated the effect of alkaline activators - NaOH_aq (NH) (NH: 0-16 M) and Na₂SiO_3aq (NS) (NS/NH: 0-3.5) in the synthesis of silico-manganese fume (SMF) and ground blast furnace slag (BFS) blended alkali-activated mortar (AASB). The use of individual activator was ineffective in producing AASB of sufficient fresh and hardened properties, compared to the synergy of both activators. This may be attributed to incomplete dissolution and condensation of oligomers required for gelation of the binder. An inverse relationship was noted among the fresh properties and the NH concentration or NS/NH ratio. This was influenced by the dissolution and condensation of silicate monomers under polymerization process. The maximum 28-day strength of ~45 MPa, setting time of 60 min and flow of 182 mm was obtained with the use of combined activators (10M-NH and NS/NH=2.5). The combined activators at NS/10M-NH=2.5 constituted SiO₂/Na₂O, H₂O/Na₂O and H₂O/SiO₂ molar ratio of 1.61, 17.33 and 10.77, respectively. This facilitated the formation of C-S-H, C/K-A-S-H and C-Mn-S-H in the framework together with an increase in the crystallinity due to more silicate re-organization within the aluminosilicate chain. On comparison of the high concentrated with mild alkali synthesized product, it revealed that the concentration of OH^- and Si monomers together with alkali metals influenced the dissolution of precursors and embedment of the constituent elements in the polymeric matrix. These factors eventually contributed to the microstructural densification of the mortar prepared with NS/10M-NH=2.5 thereby enhancing the compressive strength.