• 제목/요약/키워드: composition product

검색결과 1,009건 처리시간 0.033초

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

MCM-41을 이용한 LDPE-LLDPE-EVA 공중합체 혼합물의 접촉 열분해 반응에 미치는 Aluminium 첨가 효과 (Effect of Aluminium Addition to MCM-41 on Catalytic Cracking of an LDPE-LLDPE-EVA Copolymer Mixture)

  • 김민지;전종기;박영권;고영수;손정민
    • Korean Chemical Engineering Research
    • /
    • 제45권2호
    • /
    • pp.117-123
    • /
    • 2007
  • 농업용 필름을 제조하는데 사용되는 EVA 공중합체, LDPE, LLDPE 혼합물의 접촉 열분해 반응에 있어서 MCM-41 촉매에 aluminium을 첨가가 생성물의 수율, 탄소 수 분포 등에 미치는 영향을 조사하였다. Aluminium은 direct 및 post 방법으로 첨가하였고, 열분해 반응은 액상 접촉과 기상 접촉 반응 결과를 비교하였다. Direct 또는 post 방법으로 aluminium이 첨가된 MCM-41에서 aluminium 첨가량이 증가할수록 Lewis 산점이 증가하여 전체 산점의 양이 증가하였는데 post 방법으로 제조된 촉매에서 산점의 양이 더 많이 증가하였다. 액상 접촉 반응에서 aluminium의 양이 증가하면 가벼운 탄화수소가 많이 생기는데, $C_5-C_{12}$ 범위의 탄소화합물의 생성에 Al-MCM-41-P 촉매가 더 효과가 컸다. 기상 접촉 반응에서는 Al-MCM-41-D와 Al-MCM-41-P사이의 차이가 액상 접촉 반응시보다 상대적으로 적게 나타났으나, 액상접촉 반응에 비해 $C_{13}-C_{32}$ 범위의 탄화수소가 크게 감소했음을 알 수 있다.

인삼의 품질과 약리활성 물질과의 상관성 (Relationship of Saponin and Non-saponin for the Quality of Ginseng)

  • 남기열;고성룡;최강주
    • Journal of Ginseng Research
    • /
    • 제22권4호
    • /
    • pp.274-283
    • /
    • 1998
  • It has generally been accepted that quality of ginseng should be determined not by the content of a single component but by composition and balance of total active principles. However, there still can be an exception with a product in which a given ginsenoside is used for the treatment of a specific disease. Although ginsenosides have been regarded to be major active components of ginseng and employed as index components for the quality control, it does not consistent with the traditional concept on ginseng quality creterion; main root has been more highly appreciated than the lateral or fine root. Content of ginsenosides in the lateral or fine root is much higher than that in main root. However, the ratio of protopanaxadiol (PD) and protopanaxatriol (PT) saponins existing in various part of ginseng root is greatly different. The ratio of PD/PT saponins in main root is well balanced but the thinner the root is the higher the ratio. Thus far, a total of 34 different kinds of ginsenosides have been isolated from Korean (red) ginseng, and their pharmacological activities were elucidated partly. Interestingly, different ginsenoside shows similar or contrary effects to each other in biological systems, thus indicating the significance of absolute content of single ginsenoside as well as compositional patterns of each ginsenoside. Therefore, pharmacological activities of ginseng should be determined as a wholly concept. In these regards, standardization of ginseng material (fresh ginseng root) should be preceded to the standardization of ginseng products because ginsenoside content and non-saponin active principles such as polysaccharides and nitrogen (N)-containing compound including proteins are significantly different from part to part of the root. In other words, the main root contains less ginsenosides than other lateral or fine roots. Contents of polysaccharides and N-containing compound in main root is higher. However, the quality control of ginseng products focused on non-saponin compounds has limitation in applying to the analytical method, because of the difficult chemical analysis of these compounds. Content of ginsenosides, and ratios of PD/PT and ginsenoside Rb,/Rg, are inversely proportional to the diameter of ginseng root. Therefore, these can be served as the chemical parameters for the indirect method of evaluating from what part of the root does the material originate. Furthermore, contents of polysaccharides and N-containing compounds show inverse relationship to saponin content. Therefore, it seems that index for analytical chemistry of saponin can be applied to the indirect method of evaluating not only saponin but also non-saponin compounds of ginseng. From these viewpoints, it is strongly recommended that quality of ginseng or ginseng products be judged not only by the absolute content of given ginsenoside but also by varieties and compositional balance of ginsenosides, including contents of non-saponin active principles.

  • PDF

Influence of Quaternary Benzophenantridine and Protopine Alkaloids on Growth Performance, Dietary Energy, Carcass Traits, Visceral Mass, and Rumen Health in Finishing Ewes under Conditions of Severe Temperature-humidity Index

  • Estrada-Angulo, A.;Aguilar-Hernandez, A.;Osuna-Perez, M.;Nunez-Benitez, V.H.;Castro-Perez, B.I.;Silva-Hidalgo, G.;Contreras-Perez, G.;Barreras, A.;Plascencia, A.;Zinn, R.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제29권5호
    • /
    • pp.652-658
    • /
    • 2016
  • Twenty $Pelibuey{\times}Katahdin$ ewes ($35{\pm}2.3kg$) were used to determine the effects of the consumption of standardized plant extract containing a mixture of quaternary benzophenanthridine alkaloids and protopine alkaloids (QBA+PA) on growth performance, dietary energetics, visceral mass, and ruminal epithelial health in heat-stressed ewes fed with a high-energy corn-based diet. The basal diet (13.9% crude protein and 2.09 Mcal of net energy [NE] of maintenance/kg of dry matter) contained 49.7% starch and 15.3% neutral detergent fiber. Source of QBA+PA was Sangrovit RS (SANG) which contains 3 g of quaternary benzophenathridine and protopine alkaloids per kg of product. Treatments consisted of a daily consumption of 0 or 0.5 g SANG/ewe. Ewes were grouped by weight and assigned to 10 pens (5 pens/treatment), with two ewes per pen. The experimental period lasted 70 days. The mean temperature humidity index during the course of this experiment was $81.7{\pm}1.0$ (severe heat stress). There were no treatment effects on water intake. Dry matter intake was not affected (p = 0.70) by treatments, but the group fed SANG had a numerically (11.2%) higher gain in comparison to the control group, SANG improved gain efficiency (8.3%, p = 0.04), dietary NE (5.2%, p<0.01) and the observed-to-expected NE (5.9%, p<0.01). Supplemental SANG did not affect ($p{\geq}0.12$) carcass characteristics, chemical composition of shoulder, and organ weights (g/kg empty body weight) of stomach complex, intestines, and heart/lung. Supplemental SANG decreased liver weight (10.3%, p = 0.02) and increased visceral fat (16.9%, p = 0.02). Rumen epithelium of ewes fed SANG had lower scores for cellular dropsical degeneration (2.08 vs 2.34, p = 0.02), parakeratosis (1.30 vs 1.82, p = 0.03) and neutrophil infiltration (2.08 vs 2.86, p = 0.05) than controls. It is concluded that SANG supplementation helped ameliorate the negative effects of severe heat on growth performance of feedlot ewes fed high-energy corn-based diets. Improvement in energetic efficiency may have been mediated, in part, by anti-inflammatory effects of supplemental SANG and corresponding enhancement of nutrient uptake.

디지털 컬러용 pink-red 고온발색 무기안료의 합성 및 특성평가 (Synthesis and characterization of thermally stable pink-red inorganic pigment for digital color)

  • 이원준;황해진;김진호;조우석;한규성
    • 한국결정성장학회지
    • /
    • 제24권4호
    • /
    • pp.169-175
    • /
    • 2014
  • 최근 각광받고 있는 디지털 프린팅을 이용한 디자인 기법은 세밀한 표현과 다양한 이미지 구현이 가능하고, 원료의 낭비가 적어 효율성이 높은 장점을 가지고 있다. 디지털 프린팅 공정에서는 cyan, magenta, yellow, black이 기본적인 디지털 4원색으로 사용되며, 도자제품에 적용되는 세라믹 안료의 경우 $1000^{\circ}C$ 이상의 고온 소성이 가능하도록 우수한 열적, 유약 안정성과 발색 특성이 요구된다. 본 연구에서는 고상합성법을 이용하여 $CaO-SnO_2-Cr_2O_3-SiO_2$ 조성의 pink-red 고온발색 무기안료를 합성하였다. $Ca(Sn,Cr)SiO_5$ 세라믹 안료의 합성 조건에 따른 물성을 XRD, SEM, PSA, FT-IR를 이용하여 분석하였고, Cr 치환량 변화가 $Ca(Sn,Cr)SiO_5$ 무기 안료의 발색 거동에 미치는 영향을 Uv-vis.와 CIE 표색계 값($L^*a^*b^*$)을 기준으로 한 색도측정을 통해 관찰하였다.

수분산성 아크릴계 점착제 중합 조건에 관한 연구 (Study on Polymerization Condition of Water-based Acrylic Adhesion)

  • 이행자;장석희;장상목;김종민
    • Korean Chemical Engineering Research
    • /
    • 제48권5호
    • /
    • pp.609-614
    • /
    • 2010
  • 본 연구는 주단량체로 2-에틸헥실아크릴레이트(2-EHA), n-부틸아크릴레이트(n-BA), 메틸메타크릴레이트(MMA) 그리고 기능성 단량체로 아크릴산(AAc)을 사용한 유화중합에서 아크릴계 점착제를 합성하기 위한 최적의 합성 조건을 구하고자 한다. 이를 위하여 계면활성제 농도의 영향, 계면활성제 Hydrophilic lipophilic Balance(HLB) 값, 중합개시제의 농도와 완충제가 아크릴계 점착제의 물성에 미치는 영향을 연구하였다. 그 결과 계면활성제는 단량체 사용량에 대하여 3~5 wt%를 사용하였을 때, HLB 값이 12.3일 때 가장 안정한 점착체를 얻을 수 있었으며, 중합 개시제의 농도가 1 wt% 이상 사용하였을 때는 중합 속도는 증가하였으나 안정성이 저하되었다. 완충제로 sodium bicarbonate를 사용할 경우 0.4 wt% 이상 사용하여야 충분한 완충 효과가 있었으며, 단량체의 종류에 따라 약간의 차이는 있으나 완충제의 농도가 0.6~0.8 wt%가 적당하여 4성분계 유화중합에서 최적의 중합 조건을 제시할 수 있었다.

Differences in Physicochemical and Nutritional Properties of Breast and Thigh Meat from Crossbred Chickens, Commercial Broilers, and Spent Hens

  • Chen, Yulian;Qiao, Yan;Xiao, Yu;Chen, Haochun;Zhao, Liang;Huang, Ming;Zhou, Guanghong
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제29권6호
    • /
    • pp.855-864
    • /
    • 2016
  • The objective of this study was to compare the physicochemical and nutritional properties of breast and thigh meat from commercial Chinese crossbred chickens (817 Crossbred chicken, 817C), imported commercial broilers (Arbor Acres broiler, AAB), and commercial spent hens (Hyline Brown, HLB). The crossbred chickens, commercial broilers and spent hens were slaughtered at their typical market ages of 45 d, 40 d, and 560 d, respectively. The results revealed that several different characteristic features for the three breeds. The meat of the 817C was darker than that of the other two genotypes. The 817C were also characterized by higher protein, lower intramuscular fat, and better texture attributes (cooking loss, pressing loss and Warner-Bratzler shear force [WBSF]) compared with AAB and HLB. The meat of the spent hens (i.e. HLB) was higher in WBSF and total collagen content than meat of the crossbred chickens and imported broilers. Furthermore, correlation analysis and principal component analysis revealed that there was a clear relationship among physicochemical properties of chicken meats. With regard to nutritional properties, it was found that 817C and HLB exhibited higher contents of essential amino acids and essential/non-essential amino acid ratios. In addition, 817C were noted to have highest content of microelements whereas AAB have highest content of potassium. Besides, 817C birds had particularly higher proportions of desirable fatty acids, essential fatty acids, polyunsaturated/saturated and (18:0+18:1)/16:0 ratios. The present study also revealed that there were significant differences on breast meat and thigh meat for the physicochemical and nutritional properties, regardless of chicken breeds. In conclusion, meat of crossbred chickens has some unique features and exhibited more advantages over commercial broilers and spent hens. Therefore, the current investigation would provide valuable information for the chicken meat product processing, and influence the consumption of different chicken meat.

인터넷을 통한 반려견 식품 구매자의 인식 조사 (Awareness Survey of Consumers buying Companion Dog Food through Internet)

  • 손은심
    • 한국산학기술학회논문지
    • /
    • 제21권6호
    • /
    • pp.574-583
    • /
    • 2020
  • 본 연구는 인터넷을 통하여 반려견 식품을 구매하는 소비자의 반려견을 위한 지출 품목 및 비용, 반려견 푸드 선택 시 고려사항 등을 조사하였다. 성별로는 남성 39명(6.8%) 여성 532명(93.2%)으로 반려견 식품을 구입할 때 대부분 여성들이 인터넷 구매를 한다는 것을 알 수 있었다. 견주 연령대로는 20대 이하 184명(32.2%), 30대 241명(42.2%), 40대 이상 146명(25.6%)로 나타났다. 반려견의 연령을 보면 3세 이하가 200(35%)이고, 8세 이상 202(35.4%), 4~7세 169(29.6%)으로 나타났다. 반려견을 위한 구매빈도 주기는 1달 이상 주기로 구매한다고 가장 많이 답하였으며, 구매 식재료 중에서는 닭고기를 가장 많이 선호하는 것으로 나타났다. 월지출비용에서도 10만원 미만이 가장 높게 나타났으며, 반려견 푸드 주요 구입처로는 반려견 전문 온라인 쇼핑몰, 그 다음으로는 동물병원에서 구입한다고 하였다. 건강기능 향상을 위해서는 피부·모질개선을 가장 중요하게 여기고 있으며 그 다음으로 치아 뼈 형성, 소화력 개선 순으로 나타났다. 반려견 푸드 선택 시 전제품의 영양성분을 가장 고려할 사항이라고 여겼으며 그 다음으로는 인지도가 있는 브랜드 제품, 색·냄새·형상, 기능개선제품, 제품의 가격 순으로 나타났다. 따라서 반려견 푸드 신제품을 개발할 때는 전제품의 영양성분 뿐만 아니라 브랜드 제품, 색·냄새·형상, 영양밸런스, 기능개선제품, 제품의 가격 등을 고려해야 할 것으로 보여진다.

아크 플라즈마를 이용한 과불화합물 처리공정에서 반응가스에 의한 효과 (Effect of Reaction Gases on PFCs Treatment Using Arc Plasma Process)

  • 박현우;최수석;박동화
    • 청정기술
    • /
    • 제19권2호
    • /
    • pp.113-120
    • /
    • 2013
  • 화학적으로 안정한 과불화합물을 처리하기 위해서는 많은 양의 에너지를 필요로 한다. 이러한 단점을 극복하기 위해서 저전력 아크 플라즈마 시스템을 개발하였다. 분해대상은 $CF_4$, $SF_6$, $NF_3$가 플라즈마 토치로 직접 주입되었으며, 아크 플라즈마 토치의 열효율을 측정하여 실출력을 계산하였다. 실출력과 폐기체 유량 변화 그리고 추가적인 반응가스에 의한 분해효율을 확인하였다. 또한 열역학적 평형조성 분석을 수행하여 실험 결과와 비교하였다. 토치의 열효율은 60~66%의 결과를 보였으며 폐가스 유량이 증가함에 따라 분해효율이 감소하였고 입력전력이 늘어남에 따라 분해효율이 상승되었다. 추가적인 반응 가스가 없이 $CF_4$, $SF_6$, $NF_3$의 분해효율은 입력전력이 3 kW, 폐가스 유량이 70 L/min인 조건에서 각각 4, 15, 90%를 보였다. 반응가스로 산소와 수소를 이용하여 분해효율을 급격하게 증가시킬 수 있었으며, 실험 결과 산소보다 수소를 사용하였을 경우가 분해효율 상승효과와 부산물 제어에 효과적인 것을 알 수 있었다. 수소의 경우, 발생되는 부산물은 불화수소산이었으며 이는 일반적인 습식 스크러버를 이용하여 처리가 용이한 물질이다. 수소를 이용한 화학반응에서 입력전력이 3 kW, 폐가스유량이 100 L/min인 조건에서 $CF_4$가 25%, $SF_6$가 39%, $NF_3$가 99%의 분해효율을 각각 나타냈다.

금속성 분진폭발의 영향 분석을 위한 기반구축에 관한 연구 (A Study of Establishment of the Infrastructure for Consequence Analysis of Metallic Dust Explosion)

  • 장창봉;이경진;문명환;백주홍;고재욱
    • 한국가스학회지
    • /
    • 제21권4호
    • /
    • pp.84-91
    • /
    • 2017
  • 다양한 산업분야의 첨단제품들의 기능향상이나 디자인 등을 위해 알루미늄이나 마그네슘과 같은 가연성 금속의 사용량이 증가하고 있으며, 이러한 금속의 가공공정의 증가로 인한 금속분진이 발생할 가능성이 증가되며 이는 금속분진으로 인한 폭발사고의 증가로 이어지고 있다. 금속분진에 의한 폭발의 경우 고체 및 열분해에 의해 발생된 증기의 혼합 상태에서의 연소라는 점에서 실험적인 해석이 가스폭발이나 증기운 연소에 비해 매우 복잡하기 때문에 국내 외적으로 분진폭발에 대한 연구가 현재로서는 부족한 실정이다. 본 연구에서는 가연성 금속분진의 폭발에 대한 리스크 분석을 위한 기반구조를 마련하고, 이러한 기반을 토대로 효율적인 분석방법을 제시하기 위해 분진폭발에 대한 폭발이론과 특성에 대하여 정리 및 제시하였으며, 금속성분진 별 폭발특성을 데이터베이스화 하여 분진폭발에 대한 리스크 분석과 연구에 사용할 수 있는 기반을 마련하였다.