• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.423-432
• /
• 2005

Over last three decades, various biomaterials has been developed and applied in the biomedical market. The practical utilization of biomaterials depends on the study about an appropriate physical and biological response of biomaterials. The modification of biomaterials using various surface treatment methods has recently become an interesting topic in the field of surface engineering. A padient surface is the surface on which a gradually varying chemical composition exists along its length. A large number of research groups have been focused on the preparation of gradient surfaces. Such gradient surface is of particular interest for basic and applied studies of the interactions between biological species and surfaces since the effect of a selected property like wettability or chemical composition can be examined in a single experiment on one surface. The present review focuses on the preparation and characterization of various gradient surfaces, and their interactions with biological species.

• The Korean Journal of Ecology
• /
• v.17 no.4
• /
• pp.471-484
• /
• 1994

The forest vegetation types and their structural characteristics in Mt. $Mud\v{u}ng$ were investigated by classification method and ordination method. The forest was classified into 7 communities by ristic composition table: Quercus monogolica community, Q. serrata community, Q.acutissima community, Q.variabilis community, Q.dentata community, Pinus densiflora community and Frainus mandshurica community. Considering the moisture gradient, two kinds of distributuin pattern were shown as follows; F. mandshurica, Q. acturissima, Platycarya strobilacea and Staphylea bumalda were distribute at moist habitats, while Q. monogolica, P. densiflora and Q.variabilis at dry habitats. In continuum analysis, each population occupied different distribution area but it was continuously overlapped. On the successional trends of tree species, it is postulated that Q. mongolica species might dominate the altitudinal zone over 700m.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.3
• /
• pp.631-638
• /
• 1995

In this study, mechanical characteristics test of Functionally Gradient Materia (FGM) was performed by means of Modified Small Punch (MSP) Test with FGM; NiCrAlY-8YSZ and PSZ-Ni. To determine fracture mechanic factor, it was carried out MSP test that has possibility with small specimen (10*10*0.5 mm$^{t}$ ) and AE test to analyze micro fracture mechanism. As a result, fracture behavior became varied from brittle fracture to ductile as the content of Ni(or NiCrAlY) composition was increased and fracture energy was increased too. AE characteristics demonstrated that AE technique can detect the onset of fracture processes and AE energy was suddenly increased in the vicinity of maximum load. Since Young's modulus, fracture stress and fracture toughness was determined by MSP test, it can be known that the composition of NiCrAly 75%/8YSZ25% has the best mechanical property and furthermore this result is supported with fracture surface observation.

• Journal of Ecology and Environment
• /
• v.47 no.3
• /
• pp.75-84
• /
• 2023

Background: Knowledge of the spatial trends of plant invasions in different habitats is essential for a better understanding of the process of these invasions. We examined the variation in invasive alien plant species (IAS) richness and composition at two spatial scales defined by elevation and habitat types (roadside, forest, and cultivated lands) in the Makawanpur district of Nepal. Following an elevation gradient ranging from 500 to 2,400 m asl along a mountain road, plant species cover was recorded within sample plots of size 10 m × 5 m. Systematic random sampling was adopted in every 100 m elevation intervals on three habitat types. Results: Altogether 18 invasive alien plants belonging to eight families were recorded within 60 plots, of which 14 species (representing 80%) were from tropical North and South America. The most common plants by their frequency were Ageratina adenophora, Chromolaena odorata, Bidens pilosa, Lantana camara, and Parthenium hysterophorus. We found a significant relationship between species composition and elevation in the study area. Low-elevation regions had a higher number of alien species as compared to high-elevation regions within different habitat types. Conclusions: The species richness and density of IAS were higher in the road site followed by the cultivated land and forest sites. This pattern occurred throughout the elevation range and habitats. IAS were found mostly in the open land with high sunlight availability. Information from such scientific assessment of invasive alien plants will assist in developing appropriate management plans in the Makawanpur district.

• Journal of the Korean Ceramic Society
• /
• v.29 no.9
• /
• pp.695-704
• /
• 1992

In (Pb, La)(Zr, Ti)O3 ceramic system, the functionally gradient material (FGM) was developed, and its processing and properties were investigated. The FGMs were successfully prepared through doctor blade method with acrylic binder system as well as mold stacking press method. The ultrasonic treatment was very effective for particle dispersion in slurry, and it lead to form clack-free green films. The strain-voltage characteristics of the FGM system was significantly improved which fabricated between a high piezoelectric-low dielectric and a low piezoelectric-high dielectric composition layer.

• Advances in nano research
• /
• v.9 no.4
• /
• pp.221-235
• /
• 2020

The following composition establishes a nonlocal strain gradient plate model that is essentially related to mass sensors laying on Winkler-Pasternak medium for the vibrational analysis from graphene sheets. To achieve a seemingly accurate study of graphene sheets, the posited theorem actually accommodates two parameters of scale in relation to the gradient of the strain as well as non-local results. Model graphene sheets are known to have double variant shear deformation plate theory without factors from shear correction. By using the principle of Hamilton, to acquire the governing equations of a non-local strain gradient graphene layer on an elastic substrate, Galerkin's method is therefore used to explicate the equations that govern various partition conditions. The influence of diverse factors like the magnetic field as well as the elastic foundation on graphene sheet's vibration characteristics, the number of nanoparticles, nonlocal parameter, nanoparticle mass as well as the length scale parameter had been evaluated.

• Journal of the Korean Ceramic Society
• /
• v.32 no.6
• /
• pp.685-696
• /
• 1995

The most important techniques in the synthesis of SiC/C function gradient material (FGM) are to control the SiC/C ratio and to obtain the moderate deposition rate. For these, various gas systems and flow rates were attempted and evaluated. It turned out that the CH4＋SiCl4＋H2 system was suitable for the deposition of SiC-rich layers, the C3H8＋SiCl4＋Ar system for the deposition of carbon-rich layers, and the C3H8＋SiCl4＋H2＋Ar system was good to deposit the layers between them.

• Advances in materials Research
• /
• v.12 no.1
• /
• pp.67-81
• /
• 2023

Basalt and poly-ester fibers along with epoxy resin were used to produce inter-ply, intra-ply and functionally gradient hybrid composites. In all of the composites, the relative content of basalt fiber to poly-ester fiber was equal to 50 percent. The flexural and charpy impact properties of the hybrid composites are presented with particular regard to the effects of the hybrid types, stacking sequence of the plies, loading direction and loading speed. The results show that with properly choosing the composition and the stacking sequence of the plies; the inter-ply hybrid composites can achieve better flexural strength and impact absorption energy compared to the intra-ply and functionally gradient composites. The flexural strength and impact absorption energy of the functionally gradient hybrid composites is comparable to, or higher than the intra-ply sample. Also, by increasing the loading speed, the flexural strength increases while the flexural modulus does not have any special trend.

• Journal of the Korea Furniture Society
• /
• v.23 no.3
• /
• pp.298-304
• /
• 2012

Since 1990's, a flooring based on plywood has gotten customers' demand. Costs of raw material and production increased because of changed environment of industry. Tropical timber such as Red Meranti (Shorea acuminate) used for raw material of the floor has been depleting beside countries in South Eastern Asia changed species of afforestation. As a result, it gets hard to secure good quality of raw material for plywood. Moreover plywood price is increased suddenly after earthquake in Japan. Eucalyptus (Eucalyptus globulus) in china has been using for raw material as a countermeasure of changed environment of industry. In this study, possibility of using flooring consisted of Eucalyptus veneer as a core layer was checked by heat transfer experiments. Flooring consisted of Red Meranti was used for comparison. Two factors which impact on heat transfer are a type of density gradient and density difference between Long-grain veneer and Short-grain veneer. Red Meranti samples are 'M' type of density gradient on the other hand Eucalyptus samples are 'W' type of density gradient.

• Journal of Ecology and Environment
• /
• v.44 no.2
• /
• pp.62-71
• /
• 2020

Understanding vegetation structure and the relationship with environmental factors has been crucial for restoration and conservation of riparian zones. In this study, we conducted field survey in a riparian zone of Namhan River in South Korea both before and after flooding in order to understand temporal and spatial variations of riparian vegetation. There were significant temporal and spatial variations in species composition, and distribution patterns of vegetation were different along a gradient of elevation above the water level. At low elevation, Zizania latifolia was dominant throughout the field survey periods, and Bidens frondosa began to grow late and dominated both in post-flooding 1 and 2. Prior to flooding, Scirpus radicans and Polygonum thunbergii were widely distributed at middle elevation, while Artemisia vulgaris, Phragmites australis, and Miscanthus sacchariflorus were dominant at high elevation. After flooding, P. thunbergii was dominant at middle elevation with most other species decreasing, and more invasive or pioneer plants, including Artemisia princeps, H. scandens, and Sicyos angulatus, were observed at high elevation. Species composition and distribution patterns were homogeneous at low elevation, whereas dynamic variations of vegetation were observed both temporally and spatially at higher elevations. Elevation and distance from the water front were the most principal factors governing vegetation structure. Furthermore, soil physicochemical properties were also found to determine species composition and distribution patterns. These results indicate that vegetation structure in the riparian zones is formed by the combined effects of hydrological regime and soil physicochemical properties, inherent characteristics of species, and interspecific competition. Understanding of temporal and spatial variations of riparian vegetation may provide useful insights into ecological restoration and conservation of the vegetation within the riparian zones.