• Journal of Korean Academy of Nursing
• /
• v.34 no.6
• /
• pp.1108-1116
• /
• 2004

Purpose: This research was conducted to provide basic information about the effects of aerobic exercise on physiological change in middle-aged obese women according to differences of ${\beta}$3-adrenergic receptor polymorphisms. Method: Twenty-nine middle aged obese women with over 30%BMI were divided into three groups according to ${\beta}$3-adrenergic receptor gene polymorphism[Variable Group(VG):9, Normal Group(NG):10, Control Group(CG):10]. The VG and NG groups performed walking at 50% exercise intensity for 30 minutes a day, 4 days a week, for 12 weeks. The data was analyzed using the SPSS program. Result: The level of leptin, insulin and % body fat in the VG and NG groups was significantly lower than those of the CG after 12 weeks. In addition, the level of HDL-C in the VG and NG was significantly higher than that of the CG after 12 weeks. However, TC, TG and body weight between groups didn't appear significant at the end of 12 weeks. Conclusions: Aerobic exercise didn't cause differences in persons with differing ${\beta}$3-adrenergic receptor gene polymorphisms, but aerobic exercise affected the physiological change in middle-aged obese women. The findings suggest that aerobic exercise is a desirable nursing intervention for obesity control in middle-aged obese women.

• Journal of Bio-Environment Control
• /
• v.7 no.2
• /
• pp.123-129
• /
• 1998

This experiment was conducted to composition of nutrient solution for tore of endive hydroponics, and was compared the nutrient solution developed in the Seoul City University(SCUE) with the conventional solution of Proefstation voor Tuinbouw ender Glas. Proper compositions of nutrient solution for endive hydroponics were NO$_3$-N 15.0, NH$_4$-N 1.0, PO$_4$-P 3.0. K 10.0, Ca 5.0 and Mg 3.5 me.$\ell$$^{-1}$ , respectively SCUE and PTG standard nutrient solution showed slightly better yields among nutrient solutions. The SCUE nutrient solution and the PTG nutrient solution had no difference on growth and yield of endive Plants.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.5
• /
• pp.473-479
• /
• 2017

This study was designed to understand characteristics of oxy-combustion of coal, dried sewage sludge and solid refuse fuel (SRF). Thermogravimetric analysis was conducted by burning the fuels with air, 21% oxygen ($O_2$)/79% carbon dioxide ($CO_2$) and 30% $O_2/70%$ $CO_2$. Heating rates were varied as 5, 10, 25, 40 and $100^{\circ}C/min$. Complete coal combustion was found at the heating rates of 5, 10, 25 and $40^{\circ}C/min$, and different combustion behavior was found with the gas composition at the heating rates of 10, 25, 40 and $100^{\circ}C/min$. Coal combustion with 30% $O_2/70%$ $CO_2$ showed the highest while coal combustion with 21% $O_2/79%$ $CO_2$ showed the lowest combustion rate. On the other hand, the combustion of dried sewage sludge and SRF showed similar combustion behavior with respect to the combustion gas composition. This suggests that oxy-combustion of dried sewage sludge and SRF which contain a large amount of volatile matter may show similar combustion behavior to their air combustion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.6
• /
• pp.545-550
• /
• 2000

In order to synthesize Ba-ferrite particles by molten salt method KCl and NaCl were added to basic composition to 50% by weight. X was varied from 0.0 to 1.0 to control the magnetic properties in $BaFe_{12-2x}$/ $Co_{x}$ / $Ti_{x}$ / $O_{19}$ and 1 mol% of $SiO_2$was added to control the aspect ratio of hexagonal platelets. And the effects of reaction temperatures were examined by varying the temperature from 85$0^{\circ}C$ to 120$0^{\circ}C$ with 5$0^{\circ}C$ intervals. Eutectic composition of NaCl and KCl lowered the crystallizing temperature of Ba-ferrite in molten salts than using KCl and NaCl separatly. The morphology of resulting Ba-ferrite particles was clearly hexagonal-shaped plates. $H_{c}$ and $M_{r}$ were decreased when F $e^{3+}$ was substitued with $Co^{2+}$ and $Ti^{4+}$ from x=0 to x=1.0 in $BaFe_{12-2x}$/ $Co_{x}$ / $Ti_{x}$ / $O_{19}$ . Adding 1mol% $SiO_2$in molten salt method increased the size but shortened c-axis of the hexagonal ferrites and this result is an opposite phenomenon compared with the result in solid-statge reaction.n.ion.n.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1791-1796
• /
• 2005

Semi-shield tunneling is one of the propulsion construction methods used to lay pipes underground between two pits named 'entrance' and 'destination', respectively. Usually a simple composition, such as 'a fiducial target at the entrance+a total station (TS)+a target on the machine', is used to confirm the planned course. However, unavoidable curved sections are present in small-sized pipe lines, which are laid after implementation of a road system, for public works such as waterworks, sewer, electrical power, and gas and communication networks. Therefore, if the planned course has a curved section, it is difficult to survey the course with the abovementioned simple composition. This difficulty could be solved by using the multiple total stations (MTS), which attaches the cross type linear LED target to oneself. The MTS are disposed to where each TS can detect the LED target at the other TS or the base point or the machine. And the accurate relative positions between each MTS and target are calculated from measured data. This research proposes the relative and absolute coordinate calculation algorithm by using three MTS to measure a curved course with 20m curvature at 30m maximum distance, and verifies the algorithm experimentally.

• Journal of the Korean Ceramic Society
• /
• v.28 no.9
• /
• pp.675-682
• /
• 1991

Among many problems that need to be solved in the process of preparing multilayer chip LC filters, we studied the control of shrinkage in order to prevent the crack, warpage, and/or delamination which occurs at the interface between the inductance (L part) and the capacitance (C part). Shrinkage was controlled by compositions, powder size, calcining temperature and amount of organic binder. Capacitance sheet was prepared by mixing 65 wt% binder with the composition of 96 wt% TiO2 having an average particle size of 0.5 $\mu\textrm{m}$, 3 wt% CuO. After small amount of MnO2 and SiO2 added, it was calcined at 750$^{\circ}C$ for 2 hr. Inductance sheet was prepared by mixing 60 wt% binder with the composition of 49.5% mol% Fe2O3, 20.5 mol% ZnO, 20 mol% NiO and 10 mol% CuO which was calcined at 775$^{\circ}C$ for 2 hr. These sheets was laminated at 250 kg/$\textrm{cm}^2$, and cofired at 900$^{\circ}C$ for 2 hr to give rise to a multilayer chip LC filter without any warpage.

• Journal of Technologic Dentistry
• /
• v.31 no.4
• /
• pp.25-30
• /
• 2009

Zirconia($ZrO_2$) has attracted much attention in science and technology because of its high refractive index, high melting temperature, hardness, low thermal conductivity and corrosion barrier properties. And it is widely used as the dental restoration material because of its esthetic appearance. In this research, we analyzed the particle size and composition of the imported dental porcelain for zirconia. And the glass frit was produced. To decrease the glass transition temperature and softening temperature of the glass frit, $Li_2O$ was added into it and the effect of $Li_2O$ on the firing temperature was researched. Then the glass which contains leucite crystal with a high coefficient of thermal expansion(CTE) was manufactured and it was mixed with the glass frit to control the CTE. The phase composition were analyzed using the X-ray diffraction. The morphologies of the samples were observed by the scanning electron microscope. The 4wt% $Li_2O$-added glass frit has the optimal glass transition temperature and softening temperature. And 6 wt% leucite crystal was mixed with the glass frit to control the CTE. From the experimental results of crystallization, the crystal phase was found only leucite crystal.

• Journal of the Korean Society of Tobacco Science
• /
• v.32 no.1
• /
• pp.12-18
• /
• 2010

The parcel wrapper for cigarettes has been used as the package and media materials for protection and design of product brands. The design of parcel wrapper has been contributed to the delivery of brand image and motivated consumer to purchase the brand. Therefore, the properties of parcel wrapper have been paid attention to highlight the design image, and increasing opacity of media materials has been one of the effective ways to obtain clear design on the paper surface. This study was carried out to improve the opacity of parcel wrapper for cigarettes. The effects of pulp composition and inorganic fillers in the furnish on the optical and mechanical properties were investigated. The use of hardwood in the stock preparation gave the increased opacity of paper than that of softwood. The application of higher refractive indices of fillers was effective to improve opacity. Brightness, tensile strength and stiffness were affected by the retained filler amount on the paper. Increase of filler contents decrease the tensile strength and stiffness due to the lesser bonding ability of fibers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.9
• /
• pp.1271-1277
• /
• 2008

The effects of feeding soybean oil (SBO) or rumen protected conjugated linoleic acid (RP-CLA) on CLA accumulation in milk, and performance of lactating dairy cows were studied. Twenty four Holstein Friesian crossbred lactating dairy cows, averaging $126{\pm}45days$ in milk, $15.6{\pm}2.43kg$ of milk and $452{\pm}51kg$ body weight were stratified randomly and assigned in a randomized complete block design (RCBD) to three treatments of 8 cows each. The treatments were control, 150 g of SBO and 150 g of RP-CLA supplementation. Performance parameters showed that DM intake, NELP intake and body weight change were similar across treatments, while CP intake was decreased by SBO and RP-CLA supplementation. Milk yield and milk composition were not significantly different among treatments, except for milk fat percentage and fat yield which were significantly decreased by 27% (p<0.05) and by 28% (p<0.01), respectively, by RP-CLA supplements compared with control treatment. Feeding RP-CLA reduced 3.5% FCM compared with the other treatments (p<0.003). Both SBO and RP-CLA supplementation reduced ${\geq}C18:0$ and CLA concentration in milk fat.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.7
• /
• pp.965-970
• /
• 2016

This study was conducted to determine the effects of freezing and supplementation of molasses (M), lactic acid bacteria (LAB) and LAB+enzyme mixture on chemical and nutritional composition of sunflower silage (SF). Sunflower crops were harvested (at about $29.2%{\pm}1.2%$ dry matter) and half of fresh sunflower was ensiled alone and half was frozen (F) at $-20^{\circ}C$ for 7 days. Silage additives were admixed into frozen SF material. All samples were ensiled in glass jars with six replicates for 90 days. The treatments were as follows: i) positive control (non-frozen and no additives, NF), ii) negative control (frozen, no additives, F), iii) F+5% molasses (FM), iv) F+LAB (1.5 g/tons, Lactobacillus plantarum and Enterococcus faecium, FLAB); v) F+LAB+enzyme (2 g/tons Lactobacillus plantarum and Enterococcus faecium and cellulase and amylase enzymes, FLEN). Freezing silage increased dry matter, crude ash, neutral detergent fiber, and acid detergent lignin. The organic matter, total digestible nutrient, non-fiber carbohydrate, metabolizable energy and in vitro dry matter digestibility were negatively influenced by freezing treatments (p<0.05). In conclusion, freezing sunflower plants prior to ensiling may negatively affect silage quality, while molasses supplementation improved some quality traits of frozen silage. Lactic acid bacteria and LAB+enzyme inoculations did not effectively compensate the negative impacts of freezing on sunflower silage.