• Composites Research
• /
• 제23권3호
• /
• pp.37-42
• /
• 2010

섬유 방향 강성과 강도는 복합재 압력 용기의 성능과 밀접한 관계를 갖기 때문에, 압력 용기 구조 설계시에 다른 물성들보다 중요 설계 인자가 된다. 즉 복합재 압력 용기의 내압 변형 및 파열 압력은 섬유 물성에 의해 큰 영향을 받는다. 그러므로 정확한 섬유 방향 물성을 측정할 수 있는 기법을 확립하는 것이 복합재 압력 용기 설계 전에 우선되어야 한다. 그러나 복합재 압력용기의 섬유 방향 물성은 제작 공정 변수(와인딩 장비, 작업자, 작업환경 등)와 크기 효과에 의해 큰 영향을 받으므로 기존의 시편 시험 방법으로는 정확한 섬유 방향 물성 측정이 어렵다. 섬유 물성을 측정하는 가장 이상적인 시험 방법은 실물 압력용기 파괴시험이지만 많은 비용이 소요되어, 제품으로부터 다량의 링 시편을 채취, 내압 시험을 할 수 있는 Hoop ring 시험 방법이 제시되었다. Hoop ring 시험과 실물 압력용기의 수압 파괴 시험으로부터 구한 섬유 방향 물성들은 근접된 좋은 일치를 나타내었다.

• 한국세라믹학회지
• /
• 제51권1호
• /
• pp.7-10
• /
• 2014

Abalone shell is composed of 95 wt% $CaCO_3$ platelets and 5 wt% of a protein-rich organic matrix which acts as an adhesive layer, connecting aragonite tablets, thus maintaining the structural integrity of the composite. By mimicking abalone shell, we prepared a silicate plate/polymer nanocomposite by infiltrating PMMA between silicate layers and warm-pressing them at $200^{\circ}C$ for 1 h under 15 tons to make organic-inorganic composite materials. To examine the organic-inorganic composite materials after the warm-pressing procedure, the composite sample was analyzed with FE-SEM and TG. The bending strengths and densities of the composites prepared by a silicate plate and PMMA after the warm-pressing process were ~140 MPa and 1.5, respectively.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.479-482
• /
• 2007

For making an application in construction parts of the composite material's complicated theory needs to accumulation of data by the help of study and experiment(demonstrate). Thus, this study is conducted research and analysis about the Influence of repeated loading cycles on Strength Ratio of the high quality material which is Carbon/Epoxy Composite Laminates through the test of tensile and fatigue Characteristics, based on it, construction engineers will can apply composite materials to construction technical without difficulty.

• 복합신소재구조학회 논문집
• /
• 제6권3호
• /
• pp.26-31
• /
• 2015

The domestic and foreign specifications presented the effective width based on flange length to width ratio only. The existing paper on the effective width grasped of the effect of span, load type and cross-section properties, but localized steel bridges. Recently, The studies are going on in progress for the application of fiber reinforced composite material in construction field. Therefore, it is required to optimum design that have a good grasp the deformation characteristic of the displacements and stresses distribution and predict variation of the effective width for serviceability loading. This research addresses the effective width of all composite material box girder bridges using the finite element method. The characteristics of the effective width of composite structures may vary according to several causes, e.g., change of fibers, aspect, etc. Parametric studies were conducted to determine the effective width on the stress elastic analysis of all composite materials box bridges, with interesting observations. The various results through numerical analysis will present an important document for construct all composite material bridges.

• 한국지반공학회논문집
• /
• 제23권11호
• /
• pp.77-85
• /
• 2007

본 연구에서는 준설토 및 Bottom ash를 동시에 재활용하기 위하여 개발된 복합지반재료의 역학적 특성을 고찰하였다. 본 실험에서 제작된 복합지반재료는 부산 신항 건설현장에서 채취한 준설토, 시멘트, 기포 및 삼천포 화력발전소에 서 발생한 Bottom ash로 구성되어졌다. 다양한 배합비로 제작된 복합지반재료의 역학적 특성을 고찰하고, 특히 Bottom ash 혼합에 의한 역학적 거동 특성을 조사하기 위하여 다양한 실내실험이 수행되어졌다. 복합지반재료에 대한 실험결과 응력-변형 관계와 일축압축강도는 배합조건에 크게 의존하는 것으로 나타났고, 특히 Bottom ash 혼합시 압축강도 및 응력-변형 곡선의 기울기가 증가하는 Bottom ash 보강효과를 확인하였다. 복합지반재료의 압축강도는 양생기간이 증가할수록 증가하며, 28일 강도는 7일 강도의 약 $1.7{\sim}1.8$배 증가하는 것으로 나타났다. 복합지반재료의 단위중량은 기포함량에 크게 의존하였다. 복합지반재료의 변형계수($E_{50}$)은 Bottom ash의 혼합으로 인해 강도가 증가함에 따라 증가되었다.

• Composites Research
• /
• 제36권3호
• /
• pp.193-198
• /
• 2023

선박 경량화와 관련하여 기존 복합재료 및 3D 프린트 복합재료를 적용하는 연구가 활발히 진행되고 있다. 염수 환경에 대한 내부식성과 경량화 특성이 있는 복합재료와 우수한 생산성을 가지는 3D 프린팅 기술을 연계한 3D 프린트 복합재료의 선박 및 해양구조물 적용 가능성을 확인하기 위해 시험을 진행하였다. 본 논문에 사용된 3D 프린트 복합재료를 선박 및 해양구조물에 적용하기 위해서는 해양환경에서 노출될 수 있는 온도 환경 영향을 고려해야 한다. 따라서 해양 환경에서 노출될 수 있는 온도인 저온(-50℃), 상온(20℃), 고온(50℃) 환경에서 Carbon + Onyx, Carbon + Nylon, HSHT glass + Onyx, HSHT glass + Nylon 소재의 시편으로 인장시험을 진행하였다. 인장시험 결과, Carbon + onyx 시편이 가장 높은 인장강도를 보였고 HSHT glass + onyx 시편이 가장 높은 인장 변형률을 보였다. 또한 인장 시험 결과 시편을 분석하여 다양한 온도 환경에 노출된 3D 프린트 복합재료 시편의 파손 형상에 대해 분석하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1359-1364
• /
• 2008

In these days, the composite material is popular as a material of Retaining wall because of the advantages of economy and construction. In general, retaining wall is not estimated for the stability of structure, but some of retaining walls that are composed of composite materials became thin because of the highly dense materials. So the concern of shear failure for the structure is rising. Because standard test criterion and large scale tests equipment are rarely available, few studies are performed. So, in this study, we performed large scale direct shear tests for various confining stresses(147, 294, 441 kPa), and estimate shear behavior of composite material by the relation of shear stress - displacement and vertical - shear displacement.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.67-70
• /
• 2000

This study was performed to investigate the material behavior of hybrid thermoplastic composites contained glass fiber and calcium carbonate. The composite was prepared with each combination ratio of calcium carbonate, and the content of glass fiber was fixed with 10% by weight. In order to investigate the material behavior for various combination ratio, tension test, flexural test, and impact test were performed. Microscopic observation were conducted to examine the fractured surface of specimen for tension test. And the material behavior of the hybrid thermoplastic composite immersed in salt water with definite time was investigated.

• 항공우주시스템공학회지
• /
• 제9권3호
• /
• pp.8-11
• /
• 2015

Since the late 1990's, FAA, NASA and the aerospace industry have worked together to develop the sharing system of the composite material qualification databases which were obtained through the standardized fabrication and testing procedures. The result was what is now known as the AGATE(Advanced General Aviation Transport Experiments) or NCAMP(National Center for Advanced Materials Performance) methodology, a more cost-effective concept that shifts the major responsibility for qualification and testing from the aircraft manufacturer to the material supplier. The properties of composite materials are largely dependent on the testing as well as the raw material properties and the manufacturing process including the process control parameters. Thus it is important in the composite material qualification to comply with the standardized testing procedures. In this paper, I will describe the standardized witness methodologies of certification engineers to reduce the effect of testing variability within the qualification data.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1331-1335
• /
• 2010

A novel spherical carbon composite material, in which nanosized disordered carbons are dispersed in a soft carbon matrix, has been prepared and investigated for use as a potential anode material for lithium ion batteries. Disordered carbons were synthesized by ball milling natural graphite in air. The composite was prepared by mixing the ball-milled graphite with petroleum pitch powder, pelletizing the mixture, and pyrolyzing the pellets at $1200^{\circ}C$ in an argon flow. The ballmilled graphite consists of distorted nanocrystallites and amorphous phases. In the composite particle, nanosized flakes are uniformly distributed in a soft carbon matrix, as revealed by X-ray diffractometer (XRD) and transmission electron microscopy (TEM) experiments. The composite is compatible with a pure propylene carbonate (PC) electrolyte and shows high rate capability and excellent cycling performance. The electrochemical properties are comparable to those of hard carbon.