The fabrication of a thin-film transistor backplane and a liquid-crystal display using printing processes can eliminate the need for photolithography and offers the potential to reduce the manufacturing costs. In this study, we prepare contact via structures through a poly(methyl methacrylate) polymer insulator layer using inkjet printing. When droplets of silver ink composed of a polymer solvent are placed onto the polymer insulator and annealed at high temperatures, the silver ink penetrates the interior of the polymer and generates conducting paths between the top and bottom metal lines through the partial dissolution and swelling of the polymer. The electrical property of various contact via-hole interconnections is investigated using a semiconductor characterization system.
The management of waste tire rubber has become a pressing environmental and health issue, requiring sustainable solutions to mitigate fire hazards and conserve natural resources. The performance of waste materials in structural components needs to be investigated to fabricate sustainable structures. This study aims to investigate the behavior of glass fiber reinforced polymer (GFRP) reinforced rubberized concrete (GRRC) compressive components under compressive loads. Nine GRRC circular compressive components, varying in longitudinal and transverse reinforcement ratios, were constructed. A 3D nonlinear finite element model (FEM) was proposed by means of the ABAQUS software to simulate the behavior of the GRRC compressive components. A comprehensive parametric analysis was conducted to assess the impact of different parameters on the performance of GRRC compressive components. The experimental findings demonstrated that reducing the spacing of GFRP stirrups enhanced the ductility of GRRC compressive components, while the addition of rubberized concrete further improved their ductility. Failure in GRRC compressive components occurred in a compressive columnar manner, characterized by vertical cracks and increased deformability. The finite element simulations closely matched the experimental results. The proposed empirical model, based on 600 test samples and considering the lateral confinement effect of FRP stirrups, demonstrated higher accuracy (R2 = 0.835, MSE = 171.296, MAE = 203.549, RMSE = 195.438) than previous models.
더덕의 휘발성 향기성분은 신선더덕의 경우 총 167 종이 확인되었는데 이는 타 연구결과에 비해 상당히 많은 편이었으며, 동일 더덕이라도 저장조건에 따라 종류 및 조성비율에서 매우 큰 차이를 보였다. 조성 비율이 큰 10개의 성분들이 차지하는 비율은 58%였다. 일반재배 더덕을 4가지 조건으로 15일 혹은 30일간 저장하면서 분석한 휘발성 향기성분들 중 1-hexadecene, 2,6-dimethyl-2-octanol, 2-methyl-2-dodecanol, ${\alpha}$-cedrene, ${\beta}$-selinene, farnesane, isoledene등 7종이 모든 저장조건에서 확인되었다. 그러나 각 저장조건에서 나타나는 10개의 중요 향기 성분들을 비교한 결과 모든 저장조건 및 저장기일에서 공통적으로 나타난 성분은 없었으며, trans-2-hexen-1-ol이 $19.8%{\sim}56.0%$, 마대포장 후 실온저장 더덕을 제외한 1-hexanol이 $51.9%{\sim}71.1%$를 차지하는 주요 성분이었다. 마대포장 실온저장 더덕의 경우에는 cyclohexanol이 36.4%, trans-2-hexen-1-ol이 19.8%를 차지하였고, 2-hexenal이 12.7%로 높게 나타났다. 또한 모든 저장조건에서 확인되었던 1-hexadecene, 2,6-dimethyl-2-octanol, 2-methyl-2-dodecanol, ${\beta}$-selinene, farnesane, isoledene들은 조성비율이 매우 낮거나 순위에 포함되지 못하는 것들이 대부분이었다. 더덕 향기성분에 대한 관능평가로 더덕의 품질을 판단한다면 항균포장 냉장저장 더덕이 모든 향취가 높았으며, 그 다음이 마대포장 냉장저장, 항균포장 실온저장, 마대포장 실온저장 순으로 향취가 감소하였다. 이는 포장재의 차이보다는 저온보관 여부가 주요 변인으로 작용한다고 할 수 있다. 결론적으로 더덕 고유의 향취에 대한 관능평가를 통해 저장더덕의 상품가치를 판단할 수 있는 기준이 마련될 수 있을 것으로 기대된다.
Cho, Doo-Hee;Shin, Jin-Wook;Moon, Jaehyun;Park, Seung Koo;Joo, Chul Woong;Cho, Nam Sung;Huh, Jin Woo;Han, Jun-Han;Lee, Jonghee;Chu, Hye Yong;Lee, Jeong-Ik
ETRI Journal
/
제36권5호
/
pp.847-855
/
2014
We developed a highly refractive index planarization layer showing a very smooth surface for organic light-emitting diode (OLED) light extraction, and we successfully prepared a highly efficient white OLED device with an embossed nano-structure and highly refractive index planarization layers. White OLEDs act as an internal out-coupling layer. We used a spin-coating method and two types of $TiO_2$ solutions for a planarization of the embossed nano-structure on a glass substrate. The first $TiO_2$ solution was $TiO_2$ sol, which consists of $TiO_2$ colloidal particles in an acidic aqueous solution and several organic additives. The second solution was an organic and inorganic hybrid solution of $TiO_2$. The surface roughness ($R_a$) and refractive index of the $TiO_2$ planarization films on a flat glass were 0.4 nm and 2.0 at 550 nm, respectively. The J-V characteristics of the OLED including the embossed nano-structure and the $TiO_2$ planarization film were almost the same as those of an OLED with a flat glass, and the luminous efficacy of the aforementioned OLED was enhanced by 34% compared to that of an OLED with a flat glass.
The present study investigated free sugar, organic acid, volatile components in fresh leaf and root of the coriander respectively, and in blanched leaf and root of the coriander, respectively. The research results are as follows : Glucose, fructose and sucrose were detected in leaf and root of the coriander. The content of total free sugar was 22.91mg% in leaf and 23.84mg% in root. By blanching, the contents of total free sugar decreased to 21.28mg% and 21.89mg% in leaf and root respectively. Malic acid, trataric acid were detected in leaf and root of the coriander. The content of total organic acid in leaf was higher than that in root of the coriander. By blanching, the content of total organic acid significantly decreased in leaf and slightly decreased in root. A total of 98 flavor components were detected in the leaf of coriander and total contents of those were 878.485mg/kg. The major components were (E)-2-Decen-1-ol, (E)-2-Decenal, and (E)-2-Tetradecenal. And a large amount of aldehydes and alcohols were shown in the leaf of coriander. By blanching, a total of 75 flavor components were detected in the leaf of coriander and total contents of those were 846.49mg/kg. The major components were (E)-2-decenal, (E)-2-Tetradecenal, decanal. The amounts of aldehydes were increased more. However, the amounts of alcohols were decreased more than those of the fresh leaf, respectively. A total of 77 flavor components were detected in the root of coriander and total contents of those were 455.064mg/kg. The major components were (E)-2-Tetradecenal, (E)-2-Decenal, and (E)-2-Dodecenal. By blanching, the kinds and the contents of the flavor components decreased and the major components is the same of the fresh root. And the contents of aldehydes and alcohols, acids decreased. However, the contents of esters and ketons increased.
For a carferry with a displacement of 1,633 tonf, a seakeeping analysis-based direct load approach (DLA) was used in Part I of these series, where the final deliverable was the long-term probabilistic acceleration components. In Part II of these series, the tangential acceleration components are explained based on two approaches: a standard called the IMO CSS code and simple formulas with the probable maximum roll and pitch rotations. The subsequent tangential acceleration-induced external force components are also introduced for these two approaches. The lashing strength components were selected from the IMO CSS code. It was assumed that two different vehicles (a car and a truck) were stowed at the most distant locations on the main deck to assume the largest tangential acceleration components and were secured with four steel wires with longitudinal and transverse lashing angles of $45^{\circ}$. Four cases were considered, with different methods for predicting the acceleration components and different tools for the external loads and lashing strengths involved: cases Rule-LS (rule-based maximum probable roll and pitch angles for predicting the acceleration components in conjunction with LashingSafety), DLA-LS (seakeeping-based long-term acceleration components with LashingSafety), CSS-LC (IMO CSS code-based acceleration components using LashCon), and CSS-LS (IMO CSS code-based acceleration components using LashingSafety). In terms of the acceleration and external force components, the CSS-LC and CSS-LS results are more than two times the results of Rule-LS. Thus, when the external forces and lashing strengths are evaluated using CSS-LC and CSS-LS, the truck needs more lashing wires, while Rule-LS and DLA-LS predict that the present lashing configuration is on the safe side.
본 논문에서는 재사용가능한 소프트웨어 부품의 분류 과정을 자동화하여 라이브 러리에 구조적으로 저장하고, 사용자의 요구사항을 만족하는 부품을 효율적으로 검색 하기 위하여 부품들 사이의 의미 유사도를 측정하는 방법을 제안한다. 자연어로 기술 된 부품 설명서로부터 정보를 획득하여 부품의 특성을 표현하는 패싯을 결정하고, 각 패싯에 해당하는 항목을 자동으로 추출하여 부품 식별자를 구성하며, 분류된 부품들 의 유사성에 따라 비슷한 특성을 갖는 부품들을 인접한 위치에 저장한다. 그리고 사 용자의 요구사항을 만족하는 부품들을 검색하기 위하여 질의와 소프트웨어 라이브러 리에 저장된 부품들 사이의 의미 유사도를 측정한다. 재사용가능한 부품의 검색을 위 하여 의미유사도를 이용함으로써 단순히 사용자의 질의를 만족하는 부품들의 집합을 검색할 뿐만 아니라 질의를 만족하는 정도에 따라 검색된 부품들의 상관순위를 부여 하여 사용자들이 요구하는 부품의 검색 시간이 줄어들고 전체적인 검색 효율이 개선 되었다.
The Maximum seismic responses of steel buildings with perimeter moment resisting frames (MRF), modeled as complex MDOF systems, are estimated for several incidence angles of the horizontal components and the critical one is identified. The accuracy of the existing rules to combine the effects of the individual components is also studied. Two and three components are considered. The critical response does not occur for principal components and the corresponding incidence angle varies from one earthquake to another. The critical response can be estimated as 1.40 and 1.10 times that of the principal components, for axial load and interstory shears, respectively. The rules underestimate the axial load but reasonably overestimate the shears. The rules are not always inaccurate in the estimation of the combined response for correlated components. On the other hand, totally uncorrelated (principal) components are not always related to an accurate estimation. The correlation of the individual effects (${\rho}$) may be significant, even for principal components. The rules are not always associated to an inaccurate estimation for large values of ${\rho}$, and small values of ${\rho}$ are not always related to an accurate estimation. Only for perfectly uncorrelated harmonic excitations and elastic analysis of SDOF systems, the individual effects of the components are uncorrelated and the rules accurately estimate the combined response. The degree of correlation of the components, the type of structural system, the response parameter under consideration, the location of the structural member and the level of structural deformation must be considered while estimating the level of underestimation or overestimation.
We investigated the optimum conditions for conversion of water-insoluble components of basidiocarps of Ganoderma lucidum to water-soluble components by hydrolyzing with chitinase. We also tried it with Ganoderma luciclum residue remaining after extracting hot water-soluble components of Ganoderma lucidum. After hydrolyzing under optimum conditions (20 ppm chitinase, 2% Ganoderma lucidum or 6% Ganoderma lucidum residue, at pH 3 and at $ 35^{\circ}C$), the contents of total water-soluble components (polysaccharide or protein) were measured, and it was found that the contents of water-soluble components increased to 1.5-2.7 fold. Michaelis constant, $K_m$ and maximum rate, $V_max$ calculated by Lineweaver-Burk plot for hydrolysis of Ganoderma lucidum were 1.75% and 0.02%/min respectively and those for hydrolysis of Ganoderma lucidum residue were 53.15% and 0.53%/min respectively The protein-bound polysaccharide was isolated after hydrolysis and molecular weights were measured by Sepharose CL-4B gel filtration and compared with the molecular weights of polysaccharide before hydrolysis.
The application of adhesively bonded components is increasing in various industries such as automobile, aircraft, IC packages, and soldering techniques. In spite of such wide application in adhesively bonded components, nondestructive test techniques applying to adhesively bonded components have not been clearly established yet. In this paper, characteristics of ultrasonic test on interfaces of adhesively bonded components have been investigated by calculating transmission coefficient theoretically and experimentally. From the experimental results, the optimum conditions to establish frequencies for adhesively bonded homogeneous and dissimilar components are 4∼6 MHz and 2∼4 MHz, respectively.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.