• Publications of The Korean Astronomical Society
• /
• v.19 no.1
• /
• pp.83-92
• /
• 2004

In this paper, we introduce the development of the large storage system in order to record the observed space radio signal in the Korean VLBI Network(KVN) with high-speed. The KVN is the Very Long Baseline Interferometery(VLBI) to observe the birth of star, the structure of space by constructing radio telescope with diameter 21m at the Seoul, Ulsan, Jeju from 2001 to 2007 years. To do this, Korea Astronomy Observatory joined the international consortium for developing the high-speed large storage system(Mark 5), which is developed by MIT Haystack observatory. The Mark 5 system based on hard disk has to record up to 1 Gbps the observed space radio signal. The main features of Mark 5 system are as follows; First it is able to directly record the input data to the hard disk without PC1(Peripheral Component Interconnect) internal bus, and the second, it has two hard disk banks, which are able to hot-swap ATA/IDE type very cheap up to 1 Gbps recording and playback. The third is that it follows the international VLBI standard interface hardware(VSI-H). Therefore it can be connect directly the VSI-H type system at the input/output. Finally it also supports e- VLBI(Electronic-VLBI) through the standard Gigabits Ethernet connection.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.3
• /
• pp.201-214
• /
• 1994

The fracture process zone in concrete is a region ahead of a traction-free crack, in which two major mechanisms, microcracking and bridging, play important roles. The toughness due to bridging is dominant compared to toughness induced by microcracking, so that the bridging is dominani: mechanism governing the fracture process of concrete. Fracture mechanics does work for concrete provided that the fracture process zone is being considered, so that the development of model for the fracture process zone is most important to describe fracture phenomena in concrete. In this paper the bridging zone, which is a part of extended rnacrocrack with stresses transmitted by aggregates in concrete, is modelled by a Dugdale-Barenblatt type model with linear tension-softening curve. Two finite element techniques are shown for the analysis of progressive cracking in concrete based on the discrete crack approach: one with crack element, the other without crack element. The advantage of the technique with crack element is that it dees not need to update the mesh topology to follow the progressive cracking. Numerical results by the techniques are demonstrated.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.2
• /
• pp.134-142
• /
• 2012

A bipolar plate is a major component of a fuel cell stack, which occupies 50~60% of the total weight and over 50% of the total cost of a typical fuel cell stack. In this study, a composite bipolar plate is designed and fabricated to develop a compact and light-weight direct methanol fuel cell (DMFC) stack for a small-scale Unmanned Aerial Vehicle (UAV) application. The composite bipolar plates for DMFCs are prepared by a compression molding method using resole type phenol resin as a binder and natural graphite and carbon black as a conductor filler and tested in terms of electrical conductivity, mechanical strength and hydrogen permeability. The flexural strength of 63 MPa and the in-plane electrical conductivities of 191 S $cm^{-1}$ are achieved under the optimum bipolar plate composition of phenol : 18%; natural graphite : 82%; carbon black : 3%, indicating that the composite bipolar plates exhibit sufficient mechanical strength, electrical conductivity and hydrogen permeability to be applied in a DMFC stack. A DMFC with the composite bipolar plate is tested and shows a similar cell performance with a conventional DMFC with graphite-based bipolar plate.

• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.255-265
• /
• 2014

This study developed and proposed a pattern that can fit the body and compensate for the defects of the body type by applying shoulder princess line to the torso pattern and including formative characteristics of each object on the study of body shape's change in 40-59 year old middle aged women. The results of this study are as follows; First, according to the analysis of 'Size Korea 2010' such as average, standard deviation, minimum value, and maximum value of 48 items, women showed increase in most of the items except height as they became aged. Second, factor analysis was made to understand the shape component factors of middle aged women and to use them for the body type classification. Third, cluster analysis was made according to the shape of front and sides which should be considered in pattern production based on the factor analysis results, and the body type with the measurement values most similar to the average of direct measurement of 'Size Korea 2010' was set as standard. Fourth, in designing torso patterns through the $1^{st}$ and the $2^{nd}$ wearing experiments according to the body type, body shapes such as Chest Circumference, Waist Circumference, Hip Circumference, and Waist Back Length were considered in pattern design, goodness-of-fit was enhanced with difference in margin according to body type and different margins in front and back, and fitting satisfaction was improved by applying princess line.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1379-1385
• /
• 2014

Even the rough prediction of the product test time before the lifetime test of mechanical component begins would be of use in estimating cost and deciding how to keep up with the test. The reliability predictions of mechanical components are difficult because failure or degradation mechanisms are complicated, and few plausible databases are available for lifetime prediction. Therefore, this study conducted lifetime predictions of elastomeric U seals that were respectively installed in a hydraulic actuator and a pneumatic actuator using lifetime models and a field database based on failure physics and an actual test database obtained from the NSWC handbook. To validate the results, the predicted failure rates were compared with the actual lifetime test results acquired in the lab durability tests. Finally, this study discussed an engineering procedure to determine the coefficients in the failure rate models and analyzed the sensitivity of each influential parameter on the seal lifetime.

• Korean Medical Education Review
• /
• v.22 no.3
• /
• pp.146-152
• /
• 2020

Hospice and palliative care (HPC) education is an essential component of undergraduate medical education. Since February 4th, 2018, withholding and withdrawing life-sustaining treatment at the end of life (EOL) has been permitted in Korea as put forth by law, the "Act on Hospice and Palliative Care and Decisions on Life-Sustaining Treatment for Patients at the End of Life." Therefore, Korean medical schools have faced a challenge in providing comprehensive HPC education in order to better prepare medical students to be competent physicians in fulfilling their role in caring for patients at the EOL. There have been considerable variations in the evolution and organization of HPC education across Korean medical schools for the past 20 years. In 2016, all medical schools taught HPC curriculum as a separate course or integrated courses, with the most frequently taught topics including: delivering bad news, pain management, and the concept of palliative medicine. However, the content, time allocation, learning format, and clinical skills practice training of HPC education have been insufficient, inconsistent, and diverse. For this reason, we propose a HPC curriculum containing seven domains with 60 learning objectives in a course duration of over 20 hours based on the Palliative Education Assessment Tool (PEAT) as standard HPC curriculum. Furthermore, we recommend development of a national curriculum for HPC/EOL care education to be organized by the HPC board and managed under the accreditation criteria of the Korea Institute of Medical Education and Evaluation.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.510-521
• /
• 2013

The awareness of education service is undergoing a transition from demand side to supply side. This study 1) develops an evaluation model of education service composed of three core factors(curriculum content, professor activities, job search activity) and additional factors(public welfare, education environment, campus life), 2) verifies a model using the structural equation model, 3) calculates the satisfaction measurement index of education service, and 4) proposes the results of IPA for evaluating the satisfaction measurement of education service. The results show significant notions that core factors(curriculum content, professor activities, job search activities) and additional factors(public welfare, education environment, campus life) determine students satisfaction, and that student satisfaction effects the recommend purpose significantly. Especially, student satisfaction influenced curriculum content, job search activity, campus life, public welfare, professor activities, education environment in order. This study provides improved strategic implications based on the calculated results of component satisfaction measurement index, and the results of IPA.

• The Journal of Information Systems
• /
• v.27 no.2
• /
• pp.95-114
• /
• 2018

Purpose The recent concern over environmental problems such as greenhouse gas emission and fine dust contributes increasing interest in renewable energies. However the intrinsic characteristics of renewable energies, intermittent and stochastic generation, might cause serious problems to the stability and controllability of power grid. Therefore countermeasures such as virtual power plant (VPP) must be prepared in advance of the spread of uncontrollable distributed renewable energy resources to be one of major energy sources. Design/methodology/approach This study deals with the design concept of the VPP platform. we proposed as a technology solution for achieving the stability of power grid by guaranteeing a single power profile combining multiple distributed power sources with ICT. The core characteristics of VPP should be able to participate in the grid operation by responding to operation instructions from the system operator, KPX, as well as the wholesale electricity market. Findings Therefore this study includes energy storage device(ESS) as a controllable component as well as renewable energy resources such as photovoltaic and wind power generation. Based on this configuration, we discussed core element technologies of VPP and protype design of VPP solution platform according to system requirements. In the proposed solution platform, UX design for the integrated control center and brokerage system were included as well as ancillary service function to respond to KPX's operation instruction with utilizing the capability of ESS. In addition, a simulator was suggested to verify the VPP operations.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.227-232
• /
• 2010

According to the development of ubiquitous and computer techniques, the application fields of sensor network have been enlarged. We present the design and implementation of sensor node which is the most important component of sensor network techniques in this paper. The proposed sensor node is implemented with 8-bit microprocessor, and temperature and humidity sensing device to gather temperature and humidity data in real world. It achieves low production cost and user convenience, and also has the feature os existing commercial sensor node. Though our experiments, we show that deviation of temperature and humidity are $5^{\circ}C$ and 23.2% respectively, and the proposed sensor node is reliable in real applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.827-832
• /
• 2002

The development of dedicated network management system is essential to meet the following conditions: the system must run the configuring and repair processing for the dedicated communication network, and can manage new next generation data dedicated communication network of various types. In general it is effective that the system is consisted of decentralized module to be accessible for business logic and datum to remote area. To solve these problems, a method is to use object-oriented design techniques. That is, it is to abstract reusability objects and make component module using the abstracted objects. In this paper, we propose a management system of dedicated communication network service using object-oriented design techniques which are UML(Unified Modeling Language).