• Journal of Korean Society of Steel Construction
• /
• v.26 no.3
• /
• pp.155-167
• /
• 2014

Steel-concrete composite beam has been used for a considerable time in building construction. An essential component of a composite beam is the shear connection between the steel section and the concrete slabs, which is provided by mechanical shear connectors. A variety of shapes and devices have been in use as shear connectors. This study summarizes the results of an experimental investigation involving the testing of push-out specimens with angle shear connectors. All of 22 push-out specimens were designed to study the effect of a number of parameters on the shear capacity of angle shear connectors such as the height of the angle connector, the length of welding, and the pitch of angles. Based on the test results, a design equation was developed for predicting the shear strength of angle shear connectors.

• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1158-1165
• /
• 1998

Low frequency interior noise in cars is mainly due to structure-borne excitations which are related with road excitation and component vibrations such as suspension and engine mounts. In order to analyze the annoying interior noise. a technique (Transfer Path Analysis) is introduced to find a noise source and the path of that noise. In this study, TPA is reviewed theoretically and applied to investigate the case when the low frequency interior noise at front seat due to road excitations needs to be optimized. The subjective and objective appraisal was performed under the conditions that a testing vehicle traveled on asphalt at 30 km/h. so that the low frequency to be eliminated was detected. The related vibration and noise data for TPA were measured on running and static vehicle. The results reveal that the noise contribution along the z-direction of trailing arm is prominent to low frequency interior noise.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.445-454
• /
• 2014

In this paper, we introduce measures designed content for RTCA DO-160 F, Section 22 tests performed to verify the effects of indirect lightning and testing process of the test was carried out in the multi-purpose display certification process. This is referred to as indirect effects of lightning capability of an aircraft having electrical electronic equipment failure or damage to bring lightning induced voltages. In order to protect the avionics from lightning indirect effects of these aircraft are analyzing the effects of lightning strikes on aircraft and aircraft systems and interior design needs protection against the threat on their part. In this paper, we introduce RTCA DO-160 F, component selection process according to Section 22 category selection method and the selected level for determining the level of such measures for protection against lightning of multipurpose display for this aircraft. It also introduces the actual test process to confirm that the designed effectiveness of the selected part. We expect a good example of the lightning planned for future development of measures designed avionics through each step of the process introduced this.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.691-698
• /
• 2014

This paper describes the manufacturing processes for a flexbeam and torque tube made of composite materials, along with the procedures for testing their basic properties. A flexbeam and torque tube can be considered to be key structural components of a bearingless rotor hub system. A hinge offset effect can be realized by a large elastic deformation and twist of the flexbeam, and the blade pitch control forces are transferred by the rotation of the torque tube. The basic property tests included bending and twist tests to determine the flap stiffness, lag stiffness, and torsion stiffness of the flexbeam, torque tube, and blade, and these tests were performed prior to starting the whirl tower test. In addition, the estimated results were compared with experimental data, and the calculations were found to be a good match for the analysis results and had a similar tendency. Through these results, we could confirm that a flexbeam and torque tube made of composite materials satisfied the structural stiffness requirements.

• Journal of Korea Foundry Society
• /
• v.38 no.1
• /
• pp.9-15
• /
• 2018

Electromagnetic continuous casting (EMCC) was used to fabricate Ti-6Al-4V alloys with properties suitable for medical applications. Ti-6Al-4V alloy ingots fabricated by EMCC were subjected to heat treatment, such as residual stress removing (RRS), furnace cooling after solution treatment (ST-FC) and water-cooling after solution treatment (ST-WC), in order to obtain characteristics suitable for the standard. After component analysis, the microstructure and mechanical properties (tensile strength and elongation) were evaluated by ICP, gas analysis, OM, SEM, a Rockwell hardness tester and universal testing machine. The Ti-6Al-4V alloy ingot fabricated by EMCC was fabricated without segregation, and the lamellar structure was observed in the RRS and ST-FC specimens. The ST-WC specimen showed only martensite structure. As a result of evaluating the mechanical properties based on the microstructure results, we found that the water-cooled heat treatment condition after the solution treatment was most suitable for the Ti-6Al-4V ELI standard.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.141-144
• /
• 2007

BLUs are major component in LCD industry which occupies 90% or more of FPD market worldwide and BLU market is expected to be expanded continuously according to the trend of miniaturization, slimness, low power consumption and low weight. The larger the BLU market scale, the more important standardization of performance evaluation techniques to clearly prescribe the product specification. Currently the government is promoting the establishment of related laws and coincidence with international standards to cope with agreements such as WTO/TBT, but the nongovernmental standardization activities are not enough to be actualized. Furthermore, BLU related components such as CCFL, EEFL, inverter and reflector are already developed for localization to substitute imports with home products but collective standardization, national standardization, and international standardization are still not done. So, performance specifications and evaluation methods for normal fluorescent lamps or industrial lamps are being adopted and used as national standards and safety certification standards instead. Making these standards enables to prepare a chance to penetrate into global market and to promote world best products. Also, by making this collective standard, it provides chances to take part in international standardization activities, to protect domestic industries and technologies, to obtain the trend of advanced technologies, and to be predominant over other countries. That is to say, CCFL standardization helps raise 21st century national strategic technology policy and go ahead of globalization of core technologies.

• Journal of Multimedia Information System
• /
• v.4 no.4
• /
• pp.195-204
• /
• 2017

Mobile robots are used for years as a valuable research and educational tool in form of available open-platform designs and Do-It-Yourself kits. Rapid development and costs reduction of Unmanned Air Vehicles (UAV) and ground based mobile robots in recent years allowed researchers to utilize them as an affordable research platform. Despite of recent developments in the area of ground and airborne robotics, only few examples of Unmanned Surface Vehicle (USV) platforms targeted for research purposes can be found. Aim of this paper is to present the development of open-design USV drone with integrated multi-level control hardware architecture. Proposed catamaran - type water surface drone enables direct control over wireless radio link, separate development of algorithms for optimal propulsion control, navigation and communication with the ground-based control station. Whole design is highly modular, where each component can be replaced or modified according to desired task, payload or environmental conditions. Developed USV is planned to be utilized as a part of the system for detection and identification of marine and lake waste. Cameras mounted to the USV would record sea or lake surfaces, and recorded video sequences and images would be processed by state-of-the-art computer vision and machine learning algorithms in order to identify and classify marine and lake waste.

• YAKHAK HOEJI
• /
• v.50 no.2
• /
• pp.136-143
• /
• 2006

Roots of Scutellaria baicalensis have been used for fever remedy; diuresis, antiphlogistic. For the investigation of the active component from aerial parts of Scutellaria baicalensis, MeOH extracts from aerial parts of Scutellaria baicalensis were suspended with $H_2O$, and partitioned by $CHCl_3$. In order to investigate the efficacy of antioxidative activity the activity guided fraction and isolation of physiologically active substance were peformed. Its $H_2O,\;30\%,\;60\%$ MeOH and MeOH fractions were examined on antioxidative activity using DPPH method and TBARS assay; It was revealed that $30\%\;and\;60\%$ MeOH fractions have significant anti-oxidative activity. its fractions testing type I allergy, compound 48/80 induced systemic anaphylaxis was applied. As a result, compared with reference (cromolygate), these fraction significantly inhibited systemic anaphylaxis by $71\%\;and\;57\%$, respectively. From $30\%,\;60\%$ MeOH fraction, five compounds were isolated and elucidated apigenin 6-C-${\alpha}$-L-arabinopyranosyl-8-C-${\beta}$-D-glucopyranoside (isoschaftside, I), scutellarein 7-O-${\beta}$-D-glucuronopyranoside (scutellarin, II), apigenin 7-O- ${\beta}$-D-glucuronopyranoside (III), isoscutellarein 8-O-${\beta}$-D-glucuronopyranoside (IV), kaempferol 3-O-${\beta}$-D-glucopyranoside (V) through their physicochemical data and spectroscopic methods. We measured radical scavenging activity with DPPH method and anti-lipid peroxidative efficacy on human LDL with TBARS assay. [$I] showed antioxidant activities in order. Type I allergy compound 48/80 induced systemic anaphylaxis was applied. $[V inhibited systemic anaphylaxis in order.

• The Korean Journal of Applied Statistics
• /
• v.19 no.1
• /
• pp.149-161
• /
• 2006

The most important component in decision tree algorithm is the rule for split variable selection. Many earlier algorithms such as CART and C4.5 use greedy search algorithm for variable selection. Recently, many methods were developed to cope with the weakness of greedy search algorithm. Most algorithms have different selection criteria depending on the type of variables: continuous or nominal. However, ordinal type variables are usually treated as continuous ones. This approach did not cause any trouble for the methods using greedy search algorithm. However, it may cause problems for the newer algorithms because they use statistical methods valid for continuous or nominal types only. In this paper, we propose a ordinal variable selection method that uses Cramer-von Mises testing procedure. We performed comparisons among CART, C4.5, QUEST, CRUISE, and the new method. It was shown that the new method has a good variable selection power for ordinal type variables.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.245-251
• /
• 2000

A blend system prepared from epoxy(EP) and polyurethane (PU) was investigated in terms of the contact angle and mechanical properties. The contents of EP/PU were varied within 100/0~100/60 phr in the presence of 20 phr DDM (4,4'-diamino diphenyl methane) as a curing agent for epoxy resin. Contact angle measurements were performed employing a Rame-Hart contact angle goniometer. Deionized water and diiodomethane were chosen as the testing liquids. In this work, Owens-Wendt and Wu's models using a geometric mean were studied to analyze the surface free energy of blend system. For the mechanical and toughening properties of the casting specimens, the critical stress Intensity factor ($K_{IC}$) and impact test were performed. Especially, the impact test was carried out at room and cryogenic temperatures. As a result, specific or polar component of the surface free energy of the blend system was largely influenced on the addition of the PU resulting in increasing the impact strength for the excellent low- temperature performance.