• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.65-69
• /
• 2024

This study aimed to analyze the structural integrity of a sensor control box, a critical component for real-time monitoring of brake chamber pressure in large commercial vehicles and trailers. We utilized the computational analysis program ANSYS Workbench R2021 based on our testing conditions and vibration test specification KS R1034. Through modal analysis, we identified resonance frequencies within the frequency range of 5 Hz to 100 Hz and compared results in the frequency range of 33 Hz to 67 Hz using harmonic analysis.

• Asia pacific journal of information systems
• /
• v.34 no.2
• /
• pp.493-517
• /
• 2024

E-commerce has grown to be perceived as an integral component of modern customers' lives. Fast innovation enables businesses to implement new business ideas that enhance customers' shopping experiences. The motive is to study the allurement of unrestrained buying behaviors resulting from Live Streaming Commerce in the presence of Emotional imagery. The conceptual model and hypotheses for the study have been framed based on the SOR model. A survey was conducted in north India, where data was collected from 577 consumers experiencing live streaming and analyzed with the help of AMOS and SPSS software. The repulsive behavior scale has been developed by using qualitative research. The findings revealed that there is a significant relationship between the stimulus of livestreaming and unrestrained buying behaviors with the mediating role of emotional imagination. Two crucial mediating factors, pleasure, and arousal (fervent imagination), have successfully predicted experiential shopping behavior. The study has implications for online marketers and policymakers, as marketers can use our developed model to understand consumers' different buying behaviors, and policymakers can select and design specific features for the social presence of live streaming. Integrating three different types of unrestrained buying behavior influenced by live streaming would add to the literature. The study adds value to the literature by developing a scale to measure repulsive behavior after testing and validating with experts.

• Mass Spectrometry Letters
• /
• v.15 no.3
• /
• pp.158-165
• /
• 2024

Pneumonia is an acute respiratory infection that primarily affects the lungs and is caused by various microorganisms, including viruses, fungi, and bacteria. Klebsiella pneumoniae, a multidrug-resistant (MDR) and extensively drug-resistant (XDR) bacterium, is a leading cause of widespread pneumonia. This study aimed to identify endophytic bacteria from the leaves of Acalypha indica L. and evaluate their antibacterial properties through both in vitro and in silico approaches. The objectives included isolating endophytic bacteria from Acalypha indica L., testing their antibacterial activity against Klebsiella pneumoniae, identifying the selected bacterial isolates using molecular techniques, analyzing their secondary metabolites via gas chromatography-mass spectrometry (GC-MS), and performing in silico molecular docking studies. The study identified BE 4, an endophytic bacterial isolate of Bacillus pumilus, as exhibiting the most potent antibacterial activity against Klebsiella pneumoniae. GC-MS analysis of the ethyl acetate extract of this isolate revealed 1,2-benzenedicarboxylic acid, bis(2-methylpropyl) ester as the primary metabolite component. Furthermore, molecular docking analysis identified two natural compound ligands, 1,2-benzenedicarboxylic acid, diethyl ester (-6.5 kcal/mol), and lilial (-6.2 kcal/mol), as having potential efficacy against drugresistant bacteria responsible for pneumonia. These findings suggest that endophytic bacteria and their bioactive compounds could serve as promising candidates for the development of new treatments against drug-resistant pneumonia.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.5
• /
• pp.399-405
• /
• 2016

Recently, fiber optic sensors, which have many advantages are being applied in various fields by replacing conventional electric sensors. To transmit the light signals between an interrogator and a sensor head, optical components such as an optical adaptor and optical jumper cords are generally used. When signals are transmitted using an adaptor, the end surface of each jumper cord is faced together. If alien substances exist on the core surface of an optical fiber, those can cause light transmission loss and signal disappearance. For this reason, non-contact fiber jumper cords are developed to overcome the problems that require continual attention. The light transmission performance of non-contact fiber jumper cords are also evaluated. From the test results, conventional fiber jumper cords are unable to transmit the signals over 2 mm cavity between the ends of both cords. Otherwise, non-contact fiber jumper cords can transmit the signals with stability up to the cavity of 7 mm though they have more transmission loss than the conventional ones. Consequently, non-contact fiber jumper cords that have better signal stability than conventional ones in environments are highly recommended in field applications, especially if they play a role as a cable for signal transmission between fiber optic sensors.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.153-161
• /
• 2009

After several PWSCCs were found in Bugey(France), Ringhals(Sweden), Tihange(Belgium), Oconee, Arkansas, Crystal Fever, Davis-Basse, VC Summer(U.S.A.), Thuruga(Japan), USNRC and PNNL started the research on PWSCC, that is, PINC project. The aim of this project is to fabricate and obtain representative NDE mock-ups with flaws to simulate tight PWSCC cracks, to identify and quantitatively assess NDE methods for accurately detecting, sizing and characterizing tight cracks such as PWSCC, to document the range of locations and crack morphologies associated with PWSCC and observed responses and to incorporate findings from other ongoing PWSCC research programs, as appropriate. By participating in PINC project, Korean morphology technique about PWSCC and NDE technique have improved and become similar lever with other advanced country. Therefore, the evaluation technique of integrity for nickel alloy component has been improved by cooperation with university, research institute and industries.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.220-225
• /
• 2014

Generally, the nonlinearity of ultrasonic waves is measured using a nonlinear parameter ${\beta}$, which is defined as the ratio of the second harmonic's magnitude to the power of the fundamental frequency component after the ultrasonic wave propagates through a material. Nonlinear parameter ${\beta}$ is recognized as an effective parameter for evaluating material degradation. In this paper, we evaluated the nonlinear parameter of Al6061-T6 which had been subjected to an artificial aging heat treatment. The measurement was using the transmitted signal obtained from contact-type transducers. After the ultrasonic test, a micro Vickers hardness test was conducted. From the result of the ultrasonic nonlinear parameter, the microstructural changes resulting from the heat treatment were estimated and the hardness test proved that these estimates were reasonable. Experimental results showed a correlation between the ultrasonic nonlinear parameter and microstructural changes produced by precipitation behavior in the material. These results suggest that the evaluation of mechanical properties using ultrasonic nonlinear parameter ${\beta}$ can be used to monitor variations in the mechanical hardness of aluminum alloys in response to an artificial aging heat-treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.588-594
• /
• 2020

This study proposes non-destructive rebound-hardness and ultrasonic testing methods to more accurately evaluate the residual structural performance of reinforced concrete structures in a fire. Techniques are also proposed to assess the stiffness used in the deflection calculation with natural frequencies obtained by vibration tests. In the compressive strength evaluation using rebound hardness, the residual compressive strength of thick specimens and a larger water/cement (W/C) ratio were shown to be large. The homogeneity of concrete at high temperature compared to ambient temperature conditions was assessed by the velocity of ultrasonic waves that penetrate the concrete, and it followed W/C or thickness of slab makes little different results. To assess the stiffness of fire-damaged slabs and increase in deflection, the natural frequency was measured by vibration tests and incorporated into the equation of the stiffness. The application of this technique to the slab experiment showed that it can be a very reasonable evaluation technique. In addition, to evaluate the residual strength of a member after fire, a test of the strength of a component was carried out during and after heating.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.193-197
• /
• 2013

In this study, ultrasonic nonlinear characteristics in the heat-treated aluminum alloy have been evaluated. The nonlinearity of ultrasonic wave has been measured as the acoustic nonlinear parameter ${\beta}$, depending upon the amplitude ratio of the second-order harmonic and the fundamental frequency component of ultrasonic wave propagating through the materials. The parameter ${\beta}$ measurement has been carried out with the reflected signals from the back-wall of specimens at the same plane using the contact-type transducers. The heat-treatment, aging, has been achieved at $300^{\circ}C$ for various durations in the range of 1 to 50 hours. The tensile strength and elongation are obtained by the tensile test and then compared with the parameter ${\beta}$. There is a peak of the acoustic nonlinear parameter ${\beta}$ on 5 hours aging and the ${\beta}$ decreases thereafter, exhibiting closed relations with tensile strength and elongation. Also, the heat-treatment time showing peak in the parameter ${\beta}$ was identical to that showing severe change in the ${\sigma}-{\varepsilon}$ curve. These results suggest that the acoustic nonlinear parameter ${\beta}$ can be used for monitoring the strength variations with aging of aluminum alloys.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.3
• /
• pp.261-270
• /
• 2020

This study reviewed the quality addition rate, calculation, and application criteria needed to identify the possibility of additional medical technologists in the field for new certification and professional manpower to provide a superior laboratory. The six institutions that participated in the study were the size of large hospitals with more than 1,000 beds, with an average of five full-time laboratory physicians (also called clinical pathologists) and an average of 53 medical technologists, with 10.6 per laboratory physician. An analysis of the time required for each activity category of medical technologists revealed decreasing behavior during the analysis. In contrast, the ratio of the comprehensive pre-analysis activities was high due to the strengthening of laboratory operations and quality control. During the analysis, the proportion of biochemistry tests was high, and post-analysis of most of the results was performed. Hence, improving the quality of sample testing requires significant time, and appropriate personnel are required. In conclusion, the recruitment of medical technologists is also a key component to improving the sample quality, and corresponding personnel regulations are necessary.

• Food Science of Animal Resources
• /
• v.29 no.1
• /
• pp.132-139
• /
• 2009

The objective of this study was to investigate the most effective analysis methods for palatability grading of Hanwoo beef by comparing the results of discriminant analysis with sensory data. The sensory data were obtained from sensory testing by 1,300 consumers evaluated tenderness, juiciness, flavor-likeness and overall acceptability of Hanwoo beef samples prepared by boiling, roasting and grilling cooking methods. For the discriminant analysis with one factor, overall acceptability, the linear discriminant functions and the non-parametric discriminant function with the Gaussian kernel were estimated. The linear discriminant functions were simple and easy to understand while the non-parametric discriminant functions were not explicit and had the problem of selection of kernel function and bandwidth. With the three palatability factors such as tenderness, juiciness and flavor-likeness, the canonical discriminant analysis was used and the ability of classification was calculated with the accurate classification rate and the error rate. The canonical discriminant analysis did not need the specific distributional assumptions and only used the principal component and canonical correlation. Also, it contained the function of 3 factors (tenderness, juiciness and flavor-likeness) and accurate classification rate was similar with the other discriminant methods. Therefore, the canonical discriminant analysis was the most proper method to analyze the palatability grading of Hanwoo beef.